diff --git a/public/附录2：跨接盒检测清单V2.0 HV Adapter Check List.pdf b/public/附录2：跨接盒检测清单V2.0 HV Adapter Check List.pdf
new file mode 100644
index 0000000..94df79f
--- /dev/null
+++ b/public/附录2：跨接盒检测清单V2.0 HV Adapter Check List.pdf
@@ -0,0 +1,353 @@
+ 高压跨接盒标定作业指导书
+ Work Instruction for Calibration of HV Adapter Box
+
+Introduction:
+简介：
+
+Synonyms: adapter box，test adapter, measuring box, break-out box, unlock box, test box, All devices connected to the HV system or a component of the HV system with at least
+one plug via HV lines for the purpose of testing or measuring the HV potential.
+高压跨接盒：又称高压跨接盒，测量适配器，测量盒，分线盒，解锁盒等。所有上述设备，至少有一端高压线束插头连接到高压系统或者高压部件，用于测量和测试
+高压电位。
+
+A functional test (positive test in decommissioning WI) must be carried out by the user before each use. This checks the correct state of the signal paths. Periodic validation does
+not replace the function test.
+在每次使用之前，使用者需要对其进行功能测试（高压协议车辆通用下电上电作业指导中的跨接测试）。 在规定条件下检查线路信号。 定期检查不能替代功能测试。
+
+The CESC/ESC of department shall ensure that the electrical installations and equipment are checked for their proper condition
+使用部门CESC/ESC必须确保高压跨接适配盒电气系统和测试设备的正常状况。
+
+(1) Before first use or re-use after maintenance, inspection and calibration shall be carried out by personnel with ES or above qualification
+在首次使用之前或在更改后或者维修后的再次使用之前需要由ES以上资质人员进行检查标定
+
+(2) Routine inspection and calibration are carried out after a certain time interval. For more details, please refer to the following description.
+在一定时间间隔后进行常规检查和标定.请参考下面的执行要求。
+
+Implementation:
+执行：
+
+Adapter box with frequent use or use in harsh environments are checked at least every 6 months.
+应至少每六个月检查一次频繁使用或在恶劣环境中使用的高压跨接适配盒。
+
+Adapter box with occasional use under approximately constant conditions shall be checked at least every 12 months.
+在大致不变的环境条件下偶尔使用的高压跨接适配盒应至少每12个月检查一次。
+
+The CESC/ESC/ supervisor of each HV area should develop a test plan for their own adaptor box.
+每个高压区域的CESC/ESC/主管应制定一份高压跨接适配盒检测计划。
+
+The inspection and calibration shall be carried out by personnel with ES or above qualification and the test results shall be recorded in the attached work instruction.
+检测应由ES及以上资质人员进行，检测结果需要记录在附件的作业指导书中。
+
+Test sticker paste
+检测标签粘贴
+
+In case of non-existence: repair by manufacturer or qualified specialist workshop, recommissioning after complete HV test analog first commissioning (voltage strength)
+如果不存在：由制造商或合格的车间维修，在完成类似于初始调试（电压强度）的高压试验后重新调试。
+
+Change Notice:
+变更信息:
+
+Version Content of change Name Date
+版本 变化及更新 负责人 日期
+
+V1.0 Localization based on English version Guan Sicheng 2020.10.15
+ 基于英文版本地化 官思成
+
+V1.1 Added pictures, translation optimization Guan Sicheng 2021.01.28
+ 增加图片，翻译优化 官思成 2021.02.05
+ 2022.05.19
+V1.2 Added measurement unit Guan Sicheng
+ 增加测量单位 官思成
+
+ Optimized content and added attachment for DC/AC charging socket adaptor box measurement work Tao Mutian
+ 陶慕天
+V2.0 instructions
+
+ 优化内容，增加附件2和附件3_直流/交流充电口跨接盒测量作业指导
+
+Signature and Release:
+签字放行:
+
+更新：陶慕天
+审核：肖毅川
+ HV Adapter Check list
+ 高压适配器检测表
+
+跨接盒型号 XXXX 1st check date 2nd check date 3rd check date 4th check date
+Adapter model (HPS40-2/HVP800/HVR40/HVR200) 第一次检查日期： 第二次检查日期： 第三次检查日期 第四次检查日期
+
+ xxxx/xx/xx xxxx/xx/xx xxxx/xx/xx xxxx/xx/xx
+
+No. check items detailed rules (example) result result result result
+序号 检查项 检查细则 (样例) 检查结果 检查结果 检查结果 检查结果
+
+1 Identification of Box OK/NOK OK/NOK OK/NOK OK/NOK
+ 盒子的标识
+
+ Serial number (clear （ fill serial number 填入跨 （ fill serial number 填入跨 （ fill serial number 填入跨 （ fill serial number 填入跨接
+
+1.1 identification) 接盒序列号） 接盒序列号） 接盒序列号） 盒序列号）
+ 序列号（清楚可见）
+
+1.2 HV label has pasted and readable
+ 高压标签已粘贴且清晰可见
+
+ Visual inspection (housing IPXXD (wire protection), plug/socket IPXXB (finger protection) OK/NOK OK/NOK OK/NOK OK/NOK
+2 目视检查 （外壳的防尘等级D（试线接触防护）, 插头/插座的防尘等级B（试指接触防护）
+
+2.1 Cable not wear out, heavily squeezed, crack/cut in insulation,…
+ 线束 没有磨损，没有严重挤压变形，绝缘层没有割痕，…
+ Shield braid not visible
+2.2 Housing 电线屏蔽编织层不可见
+ 外壳
+ No hole, crack, …
+2.3 Socket housing 没有穿孔，没有裂痕， …
+ 插座外壳 Housing screws complete
+ 外壳的螺丝无缺失
+
+ no crack, deformation, …
+ 没有裂痕，变形， …
+ Locking mechanism functional (no breech lock aborted, ...)
+ 锁定功能齐全（没有闩锁断裂， …）
+
+2.4 Connector Contact protection unharmed
+ 插头 无损接触保护
+ Contact springs not bent
+2.5 Measuring socket 接触弹簧不弯曲
+ 测量插座 not dirty, no burn-off
+ 无污渍，无烧伤
+
+ no visible wear
+ 没有明显的磨损
+
+ 3 electrical testing MΩ MΩ MΩ MΩ
+ 电气测试
+
+ Insulation resistance
+
+ measurement
+ 绝缘电阻测量
+
+ HV+ --> HV-
+
+ Insulation resistance 正极 --> 负极
+
+3.1 measurement with 500V (e.g. HV+ --> Housing (for metallic housing)
+ with gossen Metrahit 27I) , value
+ > 25MΩ 正极 --> 外壳（金属外壳）
+
+ 用500V进行绝缘电阻测量 HV+ --> Measuring socket ground (if measuring socket ground is present)
+ 正极 --> 测量插座接地点（如果测量插座接地点可用）
+ （比如用 Gossen Metrahit
+
+ 27I）,测量结果大于25MΩ HV- --> Housing (for metallic housing)
+
+ 负极 --> 外壳（金属外壳）
+
+ HV- --> Measuring socket ground (if measuring socket ground is present)
+ 负极 --> 测量插座接地点（如果测量插座接地点可用）
+
+ Equipotential measurement mΩ mΩ mΩ mΩ
+ 等电位电阻测量
+
+3.2 Use multimeter to measure the
+ resistance. The value ≤100mΩ
+
+ 使用四线制电阻表进行电阻测 Shield in socket --> Housing (for metallic housing)/measuring socket ground
+ 量，测量结果≤100mΩ 插座内的屏蔽层 --> 外壳（金属外壳）或测量插座接地点
+
+ 4 Tester signature （ personnel with ES or above qualification/ES 及以上资质人员）
+ 检测人员签字
+
+ Signature
+4.1 签字:
+
+ Date
+4.2 日期:
+
+4.3 Test sticker paste
+ 检测标签粘贴
+
+Note: Adapters for official use need to be checked every year.
+备注：正式使用的适配器，每年需要检查一次
+
+版本：V2.0
+ DC Charging Socket Adapter Check list
+ 直流充电口适配器检测表
+
+No. check items detailed rules (example) 1st check date 2nd check date 3rd check date 4th check date
+序 检查项 检查细则 (样例) 第一次检查日期： 第二次检查日期： 第三次检查日期 第四次检查日期
+号
+ xxxx/xx/xx xxxx/xx/xx xxxx/xx/xx xxxx/xx/xx
+
+ result result result result
+ 检查结果 检查结果 检查结果 检查结果
+
+1 Identification of Box OK/NOK OK/NOK OK/NOK OK/NOK
+ 盒子的标识
+
+ Serial number (clear
+
+1.1 identification)
+ 序列号（清楚可见）
+
+1.2 HV label has pasted and readable
+ 高压标签已粘贴且清晰可见
+
+ Visual inspection (housing IPXXD (wire protection), plug/socket IPXXB (finger protection) ISO 23273-3) OK/NOK OK/NOK OK/NOK OK/NOK
+2 目视检查 （外壳的防尘等级D（试线接触防护）, 插头/插座的防尘等级B（试指接触防护） ISO 23273-3）
+
+2.1 Housing
+ 外壳
+ No hole, crack, …
+2.2 Socket housing 没有穿孔，没有裂痕， …
+ 插座外壳 Housing screws complete
+ 外壳的螺丝无缺失
+2.3 Measuring socket
+ 测量插座 no crack, deformation,no burn-off …
+ 没有裂痕，变形，烧伤 …
+ Locking mechanism functional (no breech lock aborted, ...)
+ 锁定功能齐全（没有闩锁断裂， …）
+
+ no visible wear
+ 没有明显的磨损
+
+3 electrical testing MΩ MΩ MΩ MΩ
+ 电气测试
+
+ Insulation resistance
+
+ measurement
+ 绝缘电阻测量
+
+ DC+ --> DC-
+
+ Insulation resistance 正极 --> 负极
+
+3.1 measurement with 500V (e.g. with DC+ --> PE
+ gossen Metrahit 27I) , value >
+ 25MΩ 正极 --> 接地
+
+ 用500V进行绝缘电阻测量（比 DC- --> PE
+ 如用 Gossen Metrahit 27I）,测量 负极 --> 接地
+
+ 结果大于25MΩ DC+ --> Housing PE
+
+ 正极 --> 外壳接地极柱
+
+ DC- --> Housing PE
+ 负极 --> 外壳接地极柱
+
+ Equipotential measurement mΩ mΩ mΩ mΩ
+ 等电位电阻测量
+
+3.2 Use multimeter to measure the
+ resistance. The value ≤100mΩ
+
+ 使用四线制电阻表进行电阻测 PE --> Housing PE
+ 量，测量结果≤100mΩ PE --> 外壳接地极柱PE
+
+4 Tester signature （ personnel with ES or above qualification/ES 及以上资质人员）
+ 检测人员签字
+
+ Signature
+4.1 签字:
+
+ Date
+4.2 日期:
+
+4.3 Test sticker paste
+ 检测标签粘贴
+
+Note: Adapters for official use need to be checked every year.
+备注：正式使用的适配器，每年需要检查一次
+
+版本：V2.0
+ AC Charging Socket Adapter Check list
+ 交流充电口适配器检测表
+
+No. check items detailed rules (example) 1st check date 2nd check date 3rd check date 4th check date
+序号 检查项 检查细则 (样例) 第一次检查日期： 第二次检查日期： 第三次检查日期 第四次检查日期
+
+ xxxx/xx/xx xxxx/xx/xx xxxx/xx/xx xxxx/xx/xx
+
+ result result result result
+ 检查结果 检查结果 检查结果 检查结果
+ OK/NOK OK/NOK
+ 1 Identification of Box OK/NOK OK/NOK
+ 盒子的标识 OK/NOK OK/NOK
+
+ Serial number (clear
+
+1.1 identification)
+ 序列号（清楚可见）
+
+1.2 HV label has pasted and readable
+ 高压标签已粘贴且清晰可见
+
+ Visual inspection (housing IPXXD (wire protection), plug/socket IPXXB (finger protection) ISO 23273-3) OK/NOK OK/NOK
+ 2 目视检查 （外壳的防尘等级D（试线接触防护）, 插头/插座的防尘等级B（试指接触防护） ISO 23273-3）
+
+2.1 Housing
+ 外壳
+
+2.2 Socket housing No hole, crack, …
+ 插座外壳 没有穿孔，没有裂痕， …
+ Housing screws complete
+2.3 Measuring socket 外壳的螺丝无缺失
+ 测量插座
+ no crack, deformation,no burn-off …
+ 没有裂痕，变形，烧伤 …
+ Locking mechanism functional (no breech lock aborted, ...)
+ 锁定功能齐全（没有闩锁断裂， …）
+
+ no visible wear
+ 没有明显的磨损
+
+ 3 electrical testing MΩ MΩ MΩ MΩ
+ 电气测试
+
+ Insulation resistance L1 --> L2
+
+ measurement
+ 绝缘电阻测量
+
+3.1 Insulation resistance L1 --> L3
+
+ measurement with 500V, value > L2 --> L3
+ 25MΩ
+ 用500V进行绝缘电阻测量,测量 L1\L2\L3 --> N
+ 正极 --> 零线
+ 结果大于25MΩ
+
+ L1\L2\L3 --> PE
+ 正极 --> 地线
+
+ N --> PE
+ 零线 --> 地线
+
+ Equipotential measurement mΩ mΩ mΩ mΩ
+ 等电位电阻测量
+
+3.2 Use multimeter to measure the
+ resistance. The value ≤100mΩ
+
+ 使用四线制电阻表进行电阻测 PE --> Housing
+ 量，测量结果≤100mΩ PE --> 外壳接地极柱
+
+ 4 Tester signature （ personnel with ES or above qualification/ES 及以上资质人员）
+ 检测人员签字
+
+ Signature
+4.1 签字:
+
+ Date
+4.2 日期:
+
+4.3 Test sticker paste
+ 检测标签粘贴
+
+Note: Adapters for official use need to be checked every year.
+备注：正式使用的适配器，每年需要检查一次
+
+版本：V2.0
+
diff --git a/public/附录3：高压跨接盒标签样例High Voltage Adapter Labeling Sample.pdf b/public/附录3：高压跨接盒标签样例High Voltage Adapter Labeling Sample.pdf
new file mode 100644
index 0000000..d2b816c
--- /dev/null
+++ b/public/附录3：高压跨接盒标签样例High Voltage Adapter Labeling Sample.pdf
@@ -0,0 +1,12 @@
+附录 3：高压跨接盒标签样例
+
+工具编号: 工具名称：
+ Tool Name：
+Inventory No.: 校验日期：
+工位信息：
+Group and Station： Date of Inspection:
+检测员签字： 下次校验日期：
+Signature of inspection： Date of next Inspection：
+
+北京奔驰汽车有限公司 I BEIJING BENZ AUTOMOTIVE CO.LTD
+
diff --git a/src/views/databaseLibary/index.vue b/src/views/databaseLibary/index.vue
index a48aad9..ab78984 100644
--- a/src/views/databaseLibary/index.vue
+++ b/src/views/databaseLibary/index.vue
@@ -41,7 +41,7 @@
-
+
@@ -173,29 +173,32 @@ const queryParams = ref({
.right-item {
font-family: Microsoft YaHei;
- font-weight: 400;
- font-size: 18px;
- color: #000000;
- line-height: 40px;
- padding: 0px 10px 0px 20px;
+ font-weight: 400 !important;;
+ font-size: 18px !important;;
+ color: #000000 !important;;
+ line-height: 40px !important;;
+ padding: 0px 10px 0px 20px !important;;
+ border: 0px !important;
}
.right-item:hover {
font-family: Microsoft YaHei;
- font-weight: 400;
- font-size: 18px;
- color: #0090FF;
- line-height: 40px;
- padding: 0px 10px 0px 20px;
+ font-weight: 400 !important;;
+ font-size: 18px !important;;
+ color: #0090FF !important;
+ line-height: 40px !important;;
+ padding: 0px 10px 0px 20px !important;;
+ border: 0px !important;
}
.activeOption {
font-family: Microsoft YaHei;
- font-weight: 600;
- font-size: 18px;
- color: #0090FF;
- line-height: 40px;
- padding: 0px 10px 0px 20px;
+ font-weight: 600 !important;;
+ font-size: 18px !important;;
+ color: #0090FF !important;;
+ line-height: 40px !important;;
+ padding: 0px 10px 0px 20px !important;;
+ border: 0px !important;
}
.mySearchInput {
diff --git a/src/views/ppeTool/index.vue b/src/views/ppeTool/index.vue
index 22b7c4e..5e1cad3 100644
--- a/src/views/ppeTool/index.vue
+++ b/src/views/ppeTool/index.vue
@@ -47,17 +47,18 @@
-
+
- {{ scope.row.expireDate }}
+ {{ moment(scope.row.expireDate).format('YYYY-MM-DD')
+ }}
-
-
+
- {{ item.name }}
+ {{ item.name }}
@@ -67,10 +68,11 @@
- 编辑
+ 编辑
删除
+ @click="handleDelete(scope.row)">删除
@@ -87,6 +89,7 @@ import addIcon from '@/assets/images/addIcon.png'
import { deptTreeSelect } from "@/api/system/user"
import { getBusDependencyPage } from "@/api/system/dependency"
import { busPpeToolsPageList, deleteBusPpeTools } from "@/api/ppeTool"
+import moment from 'moment'
const router = useRouter()
@@ -329,7 +332,15 @@ const handleDelete = (record) => {
font-weight: 400;
font-size: 16px;
text-align: left;
- color: #0090FF 100%;
+ color: #0090FF;
padding: 10px 0 !important;
}
+
+.fileLink {
+ font-family: Microsoft YaHei;
+ font-weight: 400;
+ font-size: 18px;
+ color: #4388ff;
+ // cursor: pointer;
+}
\ No newline at end of file
diff --git a/src/views/ppeTool/toolForm.vue b/src/views/ppeTool/toolForm.vue
index 5534bdb..3fc0d87 100644
--- a/src/views/ppeTool/toolForm.vue
+++ b/src/views/ppeTool/toolForm.vue
@@ -70,8 +70,10 @@
将文件拖曳至此区域，或 点击上传
- 下载模板
+ 下载WI模板
+ 下载标签样例模板
@@ -184,7 +186,7 @@ const getDetailInfo = (id) => {
getBusPpeTools(id).then(res => {
if (res.code == 200) {
ruleForm.value = res.data
- ruleForm.value.fileContent =JSON.parse(res.data.fileContent)
+ docUploadList.value = JSON.parse(res.data.fileContent)
}
})
}
@@ -200,12 +202,16 @@ const handleChoseDependency = (val) => {
}
// 标定文件模板下载
-const downloadDocxTemplate = () => {
- const link = document.createElement('a')
-
- link.href = '/ES任职资格表.docx'
- link.download = 'ES任职资格表.docx' // 设置下载文件名
-
+const downloadDocxTemplate = (val) => {
+ const link = document.createElement('a')
+ if (val == 'WI') {
+ link.href = '/附录2：跨接盒检测清单V2.0 HV Adapter Check List.pdf'
+ link.download = '附录2：跨接盒检测清单V2.0 HV Adapter Check List.pdf' // 设置下载文件名
+ }
+ if (val == 'BIAOQIANYL') {
+ link.href = '/附录3：高压跨接盒标签样例High Voltage Adapter Labeling Sample.pdf'
+ link.download = '附录3：高压跨接盒标签样例High Voltage Adapter Labeling Sample.pdf' // 设置下载文件名
+ }
document.body.appendChild(link)
link.click()
document.body.removeChild(link)
@@ -249,9 +255,9 @@ const handleSubmit = () => {
if (valid) {
if (docUploadList.value.length == 0) {
proxy.$modal.msgWarning("请上传标定文件")
- return
+ return false
}
- ruleForm.value.fileContent =JSON.stringify(docUploadList.value)
+ ruleForm.value.fileContent = JSON.stringify(docUploadList.value)
if (ruleForm.value.id != undefined) {
updateBusPpeTools(ruleForm.value).then(response => {
proxy.$modal.msgSuccess("修改成功")
@@ -535,7 +541,7 @@ const handleSubmit = () => {
height: 260px;
border-radius: 6px 6px 6px 6px;
background: #0090ff05;
- padding: 30px 450px !important;
+ padding: 60px 450px !important;
}
.downloadTemplateBtn {
@@ -556,4 +562,23 @@ const handleSubmit = () => {
background: transparent !important;
color: #409eff !important;
}
+
+.downloadTemplateBtn2 {
+ width: 100px;
+ height: 36px;
+ font-family: Microsoft YaHei;
+ font-weight: 700;
+ font-size: 14px;
+ text-align: center;
+ color: #409eff !important;
+ background: transparent !important;
+ position: absolute;
+ top: -36px;
+ left: 160px;
+}
+
+.downloadTemplateBtn2:hover {
+ background: transparent !important;
+ color: #409eff !important;
+}
\ No newline at end of file
diff --git a/src/views/qualification/escTask/components/QualificationReApplyForm.vue b/src/views/qualification/escTask/components/QualificationReApplyForm.vue
index d533074..efbd408 100644
--- a/src/views/qualification/escTask/components/QualificationReApplyForm.vue
+++ b/src/views/qualification/escTask/components/QualificationReApplyForm.vue
@@ -156,6 +156,8 @@
+ 下载模板
@@ -213,6 +215,8 @@
+ 下载模板
@@ -469,7 +473,7 @@ onMounted(() => {
getSysSectionData()
const id = route.params && route.params.Id
const node = route.params && route.params.node;
- if (id) {
+ if (id) {
getQualificationInfo(id, node)
}
});
@@ -578,6 +582,25 @@ const getSysSectionData = () => {
}
})
}
+// 资质表单模板下载
+const downloadDocxTemplate = (tempLateType) => {
+ const link = document.createElement('a')
+ if (tempLateType == 'ES') {
+ link.href = '/ES任职资格表.docx'
+ link.download = 'ES任职资格表.docx' // 设置下载文件名
+ }
+ if (tempLateType == 'ESC') {
+ link.href = '/ESC任职资格表.docx'
+ link.download = 'ESC任职资格表.docx' // 设置下载文件名
+ }
+ if (tempLateType == 'CESC') {
+ link.href = '/CESC任职资格表.docx'
+ link.download = 'CESC任职资格表.docx' // 设置下载文件名
+ }
+ document.body.appendChild(link)
+ link.click()
+ document.body.removeChild(link)
+}
const handleCancel = () => {
proxy.resetForm("ruleFormRef")
@@ -728,6 +751,25 @@ const handleSubmit = () => {
color: #FFFFFF;
}
+.downloadTemplateBtn {
+ width: 100px;
+ height: 36px;
+ font-family: Microsoft YaHei;
+ font-weight: 700;
+ font-size: 14px;
+ text-align: center;
+ color: #409eff !important;
+ background: transparent !important;
+ position: absolute;
+ top: -36px;
+ left: 110px;
+}
+
+.downloadTemplateBtn:hover {
+ background: transparent !important;
+ color: #409eff !important;
+}
+
.submitApplyBtn {
width: 100px;
height: 36px;
diff --git a/src/views/qualification/myQualifications/components/QualificationReApplyForm.vue b/src/views/qualification/myQualifications/components/QualificationReApplyForm.vue
index d8df299..fe04e57 100644
--- a/src/views/qualification/myQualifications/components/QualificationReApplyForm.vue
+++ b/src/views/qualification/myQualifications/components/QualificationReApplyForm.vue
@@ -133,6 +133,8 @@
+ 下载模板
@@ -187,6 +189,8 @@
+ 下载模板
@@ -503,6 +507,27 @@ const getSysSectionData = () => {
}
const { ruleForm, rules } = toRefs(data)
+
+// 资质表单模板下载
+const downloadDocxTemplate = (tempLateType) => {
+ const link = document.createElement('a')
+ if (tempLateType == 'ES') {
+ link.href = '/ES任职资格表.docx'
+ link.download = 'ES任职资格表.docx' // 设置下载文件名
+ }
+ if (tempLateType == 'ESC') {
+ link.href = '/ESC任职资格表.docx'
+ link.download = 'ESC任职资格表.docx' // 设置下载文件名
+ }
+ if (tempLateType == 'CESC') {
+ link.href = '/CESC任职资格表.docx'
+ link.download = 'CESC任职资格表.docx' // 设置下载文件名
+ }
+ document.body.appendChild(link)
+ link.click()
+ document.body.removeChild(link)
+}
+
const handleCancel = () => {
proxy.resetForm("ruleFormRef")
emit('refresh')
@@ -581,6 +606,25 @@ defineExpose({
color: #FFFFFF;
}
+.downloadTemplateBtn {
+ width: 100px;
+ height: 36px;
+ font-family: Microsoft YaHei;
+ font-weight: 700;
+ font-size: 14px;
+ text-align: center;
+ color: #409eff !important;
+ background: transparent !important;
+ position: absolute;
+ top: -36px;
+ left: 110px;
+}
+
+.downloadTemplateBtn:hover {
+ background: transparent !important;
+ color: #409eff !important;
+}
+
.submitApplyBtn {
width: 100px;
height: 36px;