#include "selectlinedialog.h"
#include "ui_selectlinedialog.h"
#include <QFile>
#include <QDebug>
#include <QTextStream>
#include "LogIO.h"

QString g_SelectLine_filePath = "";

SelectLineDialog::SelectLineDialog(QWidget *parent) :
    QDialog(parent),
    ui(new Ui::SelectLineDialog)
{
    ui->setupUi(this);
    loadStyle(":/qrc/qss/flatgray.css");

    g_SelectLine_filePath = "";
    //
    connect(ui->ok, SIGNAL(clicked()), this, SLOT(slotOkClicked()));
    connect(ui->cancel, SIGNAL(clicked()), this, SLOT(slotCancelClicked()));
}

SelectLineDialog::~SelectLineDialog()
{
    delete ui;
}


void SelectLineDialog::loadStyle(const QString &qssFile)
{
    //加载样式表
    QString qss;
    QFile file(qssFile);
    if (file.open(QFile::ReadOnly)) {
        //用QTextStream读取样式文件不用区分文件编码 带bom也行
        QStringList list;
        QTextStream in(&file);
        //in.setCodec("utf-8");
        while (!in.atEnd()) {
            QString line;
            in >> line;
            list << line;
        }

        file.close();
        qss = list.join("\n");
        QString paletteColor = qss.mid(20, 7);
        this->setPalette(QPalette(paletteColor));
        //用时主要在下面这句
        this->setStyleSheet(qss);
    }
}

void SelectLineDialog::setInfo(QString fileFull, QString strWellName, QString strType)
{
    CLogIO * logio=new CLogIO();
    if(!logio->Open(fileFull.toStdString().c_str(),CSlfIO::modeRead))
    {
        delete logio;
        QString aa=fileFull+"文件打开失败，请检查！";
        qDebug() << aa;
        //AppendConsole(pai::log::PAI_ERROR,aa);
        return;
    }
    else
    {
        Slf_FILE_MESSAGE mssage;
        logio->GetFileMessage(mssage);

        if(strWellName != QString(QString::fromLocal8Bit(mssage.WellName)))
        {
            delete logio;
            return;
        }

        char* curvename=new char[65];
        curvename[64]='\0';
        char* aliasname=new char[65];
        aliasname[64]='\0';
        //
        int nSlfCount = logio->GetObjectCount();
        for(int i = 0; i< nSlfCount; i++)
        {
            logio->GetObjectName(i,curvename,NULL,aliasname);
            if(!logio->IsObject(i)) {
                logio->DiscardObject(i);
                continue;
            };
            if(logio->GetObjectStatus(i)!=OBJECT_NORMAL)
            {
                continue;
            }
            short curvetype=logio->GetObjectType(i);
            //
            short Attribute=0,SubAttribute=0;
            logio->GetObjectAttribute(i,&Attribute,&SubAttribute);

            QString strCurveName = QString::fromLocal8Bit(curvename);
            if(curvetype>CARD_OBJECT || 0 == curvetype)
            {
                qDebug() << "strCurveName: " << strCurveName;
                //表格数据
                if (strCurveName == "GUJING1_RESULT" || strCurveName == "GUJING2_RESULT" || strCurveName == "GUJING3_RESULT")
                {
                    //固井
                    if(strType=="gujingObject")
                    {
                        //下拉列表
                        ui->comboBox->addItem(strCurveName);
                    }
                }
                else
                {
                    //气测/FMT/射孔/文本(去掉固井曲线)
                    if(strType=="JiegutextObject")
                    {
                        //下拉列表
                        ui->comboBox->addItem(strCurveName);
                    }
                }
            }
            else if(CURVE_OBJECT == curvetype)
            {
                //曲线
                if(strType!="curveObject")
                {
                    continue;
                }

                //判断曲线有效性
                Slf_CURVE acurveinfo;
                logio->GetCurveInfo(i,&acurveinfo);
                if(acurveinfo.DepLevel!=0&&(acurveinfo.EndDepth-acurveinfo.StartDepth>0))
                {
                    if(acurveinfo.MaxValue==acurveinfo.MinValue||acurveinfo.MaxValue==-99999||acurveinfo.MaxValue==-9999||acurveinfo.MinValue==999999||acurveinfo.MinValue==999999||acurveinfo.MinValue==99999||acurveinfo.MinValue==99999||acurveinfo.MinValue==-9999){
                        int curveindex=logio->OpenSlfTable(i,-1);
                        if(curveindex>-1)
                        {
                            MyDataTypeEnum vVdl;
                            DWORD count=(acurveinfo.EndDepth-acurveinfo.StartDepth)/acurveinfo.DepLevel+1.5;
                            DWORD len=count*acurveinfo.CodeLen;
                            acurveinfo.MinValue=99999999;
                            acurveinfo.MaxValue=-99999999;
                            if(acurveinfo.CodeLen==8) acurveinfo.MinValue=99999999;
                            vVdl.vchar=new char[len];
                            len=logio->ReadCurve(curveindex, acurveinfo.StartDepth,count,(void *)vVdl.vchar);
                            if(!len) {
                                QString cs;
                                char buf[1000];
                                sprintf(buf,"%s %f-%f",acurveinfo.Name,acurveinfo.StartDepth,acurveinfo.EndDepth);
                                cs=buf;
                                int flag = QMessageBox::warning(NULL,"提示",QString(cs+"\n曲线信息异常！删除该曲线可能需要较长时间，建议复制正常曲线等信息到新文件，然后删除此文件。是否此时直接将该曲线删除？"),QMessageBox::Yes,QMessageBox::No);
                                if(flag==QMessageBox::Yes) logio->DiscardObject(i);
                                delete vVdl.vchar;
                                continue;
                            }
                            for(int kk=0;kk<count;kk=kk+10)
                            {
                                float buf[200];
                                buf[0]=0;
                                float temp=logio->GetData(acurveinfo.RepCode,&vVdl.vchar[kk*acurveinfo.CodeLen],buf);

#ifdef WIN32
                    if(_isnan(temp)||!_finite(temp)) continue;
#else
                    if(__isnan(temp)||!__finite(temp)) continue;
#endif // WIN32

                                if(acurveinfo.MaxValue<temp) if(temp!=-9999.0&&temp!=-999.25&&temp!=-99999.0)acurveinfo.MaxValue=temp;
                                if(acurveinfo.MinValue>temp) if(temp!=-9999.0&&temp!=-999.25&&temp!=-99999.0)acurveinfo.MinValue=temp;
                            }
                            logio->SetCurveInfo(curveindex,&acurveinfo);
                            delete vVdl.vchar;
                        }
                    }
                }
                else if(acurveinfo.DepLevel==0||acurveinfo.StartDepth<-100000||acurveinfo.StartDepth>100000)
                {
                    QString cs;
                    char buf[1000];
                    sprintf(buf,"%s %f-%f",acurveinfo.Name,acurveinfo.StartDepth,acurveinfo.EndDepth);
                    cs=buf;
                    int flag = QMessageBox::warning(NULL,"提示",QString(cs+"\n曲线信息异常！删除该曲线可能需要较长时间，建议复制正常曲线等信息到新文件，然后删除此文件。是否此时直接将该曲线删除？"),QMessageBox::Yes,QMessageBox::No);
                    if(flag==QMessageBox::Yes) logio->DiscardObject(i);
                    continue;
                }

                //下拉列表
                ui->comboBox->addItem(strCurveName);
            }
            else if(CARD_OBJECT == curvetype)
            {
                //参数卡-》树图

            }
            else if(WAVE_OBJECT == curvetype)
            {
                //波列

                //多臂井径
                if(strType=="MCalsObject")
                {
                    //下拉列表
                    ui->comboBox->addItem(strCurveName);
                }

            }
            else if(TDT_OBJECT == curvetype)
            {
                //TDT-》树图

            }
        }
        delete []curvename;
        delete []aliasname;
        delete logio;
        //delete []pEntry;
    }
}

//
void SelectLineDialog::slotOkClicked()
{
//    g_SelectWellIndex = ui->comboBox->currentIndex();

    QString strLine = ui->comboBox->currentText();
    if(strLine=="")
    {
        return;
    }

    g_SelectLine_filePath = strLine;
    //关闭
    accept(); // 让 QDialog::exec() 返回 QDialog::Accepted
    //QDialog::close();
}

//
void SelectLineDialog::slotCancelClicked()
{
    reject(); // 让 QDialog::exec() 返回 QDialog::Rejected
    //QDialog::close();
}