#ifndef FORMDRAW_H
#define FORMDRAW_H

#include <QWidget>
#include <QPainter>
#include <QPaintEvent>
#include "qmycustomplot.h"
#include "formtitle.h"
#include "formtrack.h"
#include "LogIO.h"
#include "MemRdWt.h"

#pragma execution_character_set("utf-8")

//const int iFracType=15;
//蝌蚪图
typedef struct FRACDEF
{
    int iCode;      //代码
    QString csName; // 名称
    int iType;      //形状代码(1:正弦曲线 2:连线 3:封闭区域)
    QColor crColor; //颜色(红 绿 蓝)
    int nLineWidth; //线宽度
    int bDraw;      // 是否显示
}FRAC_DEF;

typedef struct FRACTABLE
{
    float DEP;      //深度
    float AorX;
    float XETAorH;
    float W;
    float DIPorS;   //倾角
    float DIR;      //方位
    float ID;       //裂缝代码/可信度
    float NUM;
    float X[16],Y[16];//X0,Y0,X1,Y1,X2,Y2,X3,Y3,X4,Y4,X5,Y5,X6,Y6,X7,Y7,X8,Y8,X9,Y9;
}FRAC_TABLE;

namespace Ui {
class FormDraw;
}

class FormDraw : public QWidget
{
    Q_OBJECT

public:
    explicit FormDraw(QWidget *parent = nullptr, QString m_strWellName="", QString strTrackName="");
    ~FormDraw();

    void setDrawData(QStringList slist);
private:
    Ui::FormDraw *ui;

protected:
    void paintEvent(QPaintEvent *event);

public slots:
    void dragEnterEvent(QDragEnterEvent* event);
    void dragMoveEvent(QDragMoveEvent* event);
    void dropEvent(QDropEvent* event);
    //
    void s_mouseWheel(QWheelEvent *event);

    void setRowHeight(double dHight, QProgressBar *progressBar, int iSplit);

public:
    QString m_strUuid;
    QString m_strWellName;
    QString m_strTrackName;

    FormTrack *m_formTrack;

    QStringList m_listLineName;
    QStringList m_listWaveName;
    QStringList m_listTableName;

    //X坐标
    float m_vmax;
    float m_vmin;

public:
    void initForm(QMyCustomPlot *widget, QString strSlfName, QString strLineName,
                  double newLeftScale=-9999, double newRightScale=-9999, QString strScaleType="线性", QColor lineColor=QColor(0,0,0), double width=1, Qt::PenStyle lineStyle=Qt::SolidLine);
    void addRandomGraph(QMyCustomPlot *widget, QVector<double> x, QVector<double> y, QString strSlfName, QString strLineName, QString strAliasName, QString strUnit,
                        double newLeftScale=-9999, double newRightScale=-9999, QString strScaleType="线性", QColor lineColor=QColor(0,0,0), double width=1, Qt::PenStyle lineStyle=Qt::SolidLine);
    void setupLineStyleDemo(QMyCustomPlot *customPlot);
    void setupSelectionDemo(QMyCustomPlot *customPlot);

    //波列
    void initWave(QMyCustomPlot *widget, QString strSlfName, QString strWaveName, int &_nSamples);
    void initWave_3D(QMyCustomPlot *widget, QString strSlfName, QString strWaveName, int &_nSamples);
    void initWave2(QMyCustomPlot *widget, QString strSlfName, QString strWaveName);

    //图像-3d成图
    int getColorConfig(QVector <QString> &qFiles);
    void DrawImageNew_NoFilter(QMyCustomPlot *widget, QString strSlfName, QString &strWaveName, int &_nSamples);

    //表格曲线
    void initTableLine(QMyCustomPlot *widget, QString strSlfName, QString strLineName);
    void ReadFracDef();
    void ReadData(QString strSlfName, QString strLineName);//表格
    void ReadData(QString strSlfName, QString strLineName, int iCurve, Slf_CURVE *curve);//曲线
    void DrawDip(QMyCustomPlot *widget);
    void DrawStck(QMyCustomPlot *widget);
    void DrawTabDip(QMyCustomPlot *widget);
    void CalcDipWidth(int nColumn,float *flWidth,float factor,int x1,int x2,float flHoriRatio);
    void Refurbish();
    void DrawJykt(QMyCustomPlot *widget, QString strSlfName);
    void DrawDenv(QMyCustomPlot *widget, QString strSlfName);
	
    int m_PointNum;
    //
    int FracNum;
    float *m_pflTab_Frac;
    bool m_bFracIsOK;
    //CString m_csUnit;
    //
    Slf_CURVE m_Curve,m_Curve2,m_Curve3;
    char *m_Value = NULL,*m_Value2 = NULL,*m_Value3 = NULL;
    // 以下变量需保存在模板里
    //  绘制时，方位/倾角/可信度曲线的深度、采样间隔应该一致
    //CString m_csCurveDDIR,m_csCurveDANG,m_csCurveGrad;        // 方位/倾角/可信度 曲线名
    float m_LeftVal2,m_RightVal2;
    float m_flGrad1,m_flGrad2;        // 可信度
    int m_bTableData = 0;//表格或曲线
    QRectF m_Rect;
    float m_nRadius,m_nCircleWidth;     // 半径，圆线宽度
    float m_nTailWidth,m_nTailLen;        // 尾宽度、尾长
    float m_nSltk;        // 杆状图长度
    QColor  m_crPointFill,m_crTail,m_crCircle;
    QColor m_crGridSmall;
    QString m_strSlfName;
    //TabDip
    QString m_qsWellName,m_qsTable;        //
    QString  m_qsDepth,m_qsDIP,m_qsDIR,m_qsID,m_qsProperty;   // 控制曲线
    QList<FRAC_DEF>   m_FracDefList;
    QList<FRAC_TABLE> m_FracTabList;
    bool m_bTypeDraw[iFracType];
    bool m_bDrawValue;
    int m_iPrecision;//小数位数
    float m_SDep,m_EDep,m_Rlev;
    QString m_csCurveDDIR,m_csCurveDANG,m_csCurveGrad;
    float m_LeftVal;                        //左刻度
    float m_RightVal;						//右刻度

    //井眼垮塌矢量图
    QString m_csCurveCAL;
    float m_flStep;// 增加深度间隔
    float m_nCircleLineWidth;//增加圆线宽
    QColor m_crLine,m_crTailLine;     // 圆线颜色,尾线颜色
    float m_nOffset; // 角度偏移=0,主应力方向，=90，长轴方向

    //井斜方位图
    QString m_csCurveAZIM, m_csCurveDEVI;        // 方位/倾角/可信度 曲线名
    QColor  m_TailColor,m_crCirCleColor;// add m_crCirCleColor圆线颜色
    QColor  m_crPointFillDenv;

    //文字结论
    void initWords(QMyCustomPlot *widget, QString strSlfName, QString strLineName);
    bool LoadFromSLF(QMyCustomPlot *widget, QString strSlfName, QString strLineName);

    //解释结论
    void initResult(QMyCustomPlot *widget, QString strSlfName, QString strLineName);
    bool LoadFromSLF_Result(QMyCustomPlot *widget, QString strSlfName, QString strLineName);

    //录井剖面
    void initGeoLith(QMyCustomPlot *widget, QString strSlfName, QString strLineName);
    bool LoadFromSLF_GeoLith(QMyCustomPlot *widget, QString strSlfName, QString strLineName);

    //井壁取心
    void initSwallCore(QMyCustomPlot *widget, QString strSlfName, QString strLineName);
    bool LoadFromSLF_SwallCore(QMyCustomPlot *widget, QString strSlfName, QString strLineName);

    //固井结论
    void initGujing(QMyCustomPlot *widget, QString strSlfName, QString strLineName);
    bool LoadFromSLF_Gujing(QMyCustomPlot *widget, QString strSlfName, QString strLineName);

    //岩心实验数据
    void initCorePhysics(QMyCustomPlot *widget, QString strSlfName, QString strLineName);
    //岩心图片数据
    void initIMAGE_DATA(QMyCustomPlot *widget, QString strSlfName, QString strLineName);
    bool LoadFromIMAGE_SLF(QMyCustomPlot *widget, QString strSlfName, QString strLineName);
    //深度
    void initDepth(QMyCustomPlot *widget);
    //频率统计图
    void initFgrq(QMyCustomPlot *widget);
    //玫瑰图
    void initRose(QMyCustomPlot *widget);
    void addQCPItemLine(QMyCustomPlot *widget, float cx, float cy, const QPointF& p1, const QPointF& p2, const QPen& wPen);
signals:
    //void sig_AddLine(QString strSlfName, QString strWellName, QString strTrackName, QString strLineName);


public slots:
    void s_addLine(QString strUuid, QString strSlfName, QString strWellName, QString strTrackName, QString strLineName);
    void s_AddLine_Property(QString strUuid, QString strSlfName, QString strWellName, QString strTrackName, QString strLineName,
                    double newLeftScale, double newRightScale, QString strScaleType, QColor lineColor, double width, Qt::PenStyle lineStyle);//新建曲线，带属性

    void s_delLine(QString strUuid, QString strWellName, QString strTrackName, QString strLineName);
    void s_MouseMove(QString strUuid, QString strWellName, QString strTrackName, float dep);
    void s_handleRectRangeChange(QCPRange newRange);
    void s_selectionRectAccepted(const QRect &rect, QMouseEvent *event);

    void s_addGanZuangTu(QString strUuid, QString strSlfName, QString strWellName, QString strTrackName, QString strLineName, int nW);//杆状图
    //井眼垮塌矢量图
	void s_addJykt(QString strUuid, QString strSlfName, QString strWellName, QString strTrackName, QString strLineName, int nW);
	//井斜方位图
    void s_addDenv(QString strUuid, QString strSlfName, QString strWellName, QString strTrackName, QString strLineName, int nW);
    //图像 成像
    void s_addDrawImage(QString strUuid, QString strSlfName, QString strWellName, QString strTrackName, QString strLineName, int nW);
    //裂缝
    void s_addCrack(QString strUuid, QString strSlfName, QString strWellName, QString strTrackName, QString strLineName, int nW);

    //地质层位道
    void s_addGeoSection(QString strUuid, QString strSlfName, QString strWellName, QString strTrackName, QString strLineName, int nW);

    //
    void s_addWave(QString strUuid, QString strSlfName, QString strWellName, QString strTrackName, QString strWaveName);
    void s_delWave(QString strUuid, QString strWellName, QString strTrackName, QString strLineName);

    //
    void s_addTableLine(QString strUuid, QString strSlfName, QString strWellName, QString strTrackName, QString strWaveName);
    void s_delTableLine(QString strUuid, QString strWellName, QString strTrackName, QString strLineName);

};

#endif // FORMDRAW_H