#include "mainwindow.h"
#include "ui_mainwindow.h"

#include <QSplitter>
#include <QFile>
#include <QTextStream>
#include <QDebug>

#include "totalTitleBar.h"
//
#include "geometryutils.h"
#include "LogIO.h"
#include "WellLogTableDialogNew.h"

#include "qtcommonclass.h"

#include "PluginName.h"
#include "CallManage.h"
#include "CallPlugin.h"
#include <QFuture>
#include <QtConcurrent/QtConcurrent>
#include "fileopenthread.h"

//以下参数从配置文件读取
int g_iIndex = 0;
int g_iNum = 0;
int g_iOneWidth = 200;  //道宽
int g_iHeadHigh = 30;   //道头高度
int g_iTitleHigh = 303; //道对象高度
int g_iCurveHigh = 3020;//曲线高度
int g_iMove = 12;   //道头偏移
int g_iPointNum = 30000; // number of points in graph
int g_iLineNum = 0; // number of Line
int g_iWidth = 2500;  //道宽
//
int g_iX1 = -15;
int g_iX2 = 15;
int g_iY1 = -3000;
int g_iY2 = 0;
int g_iCanZoom = 0;

int g_iScale = 3000;
QString g_prjname="";

MainWindow::MainWindow(QWidget *parent) :
    QMainWindow(parent),
    ui(new Ui::MainWindow)
{
    ui->setupUi(this);

    //setWindowState(Qt::WindowMaximized);//最大化

    //
    this->setWindowTitle(tr("  中国石化一体化测井软件平台 LogPlus"));
    this->setWindowIcon(QIcon(":/qrc/logo.ico"));

    //加载样式
    //loadStyle(":/qrc/qss/lightblue.css");
    //loadStyle(":/qrc/qss/blacksoft.css");
    loadStyle(":/qrc/qss/flatgray.css");

    ReadConfig();

    initTitleBar();			//菜单栏
    initToolBar();			//工具栏
    initProjectView();      //左侧-项目区 初始化在前
    initWorkSpaceView();	//中间-工作区 初始化在后
    dockLayout();
    //
    this->setStatusBar(::GetStatusBar());//状态栏

    //关联信号槽，打开项目
    connect(CallManage::getInstance(), SIGNAL(sig_Open()), this, SLOT(s_Open()));
    //关联信号槽，关闭项目
    connect(CallManage::getInstance(), SIGNAL(sig_CloseProject()), this, SLOT(s_CloseProject()));

    //曲线
    //关联信号槽，数据查看
    connect(CallManage::getInstance(), SIGNAL(sig_ShowCurve(QString, QString)), this, SLOT(s_ShowCurve(QString, QString)));

}

MainWindow::~MainWindow()
{
    delete ui;
}

void MainWindow::ReadConfig()
{
    int iIndex;
    int iNum;
    int iOneWidth;
    int iHeadHigh;
    int iTitleHigh;
    int iCurveHigh;
    int iMove;
    int iPointNum;
    int iLineNum;

    // 1.获取当前运行程序的目录路径
    QString applicationDirPath = QCoreApplication::applicationDirPath();
    QString configPath;
    configPath = applicationDirPath + "/config/config.ini";

    //从配置文件读取
    QtCommonClass *qtCommon = new QtCommonClass(this);
    qtCommon->readConfigSize(configPath, iIndex, iNum, iOneWidth, iHeadHigh, iTitleHigh, iCurveHigh, iMove, iPointNum, iLineNum);

    g_iIndex = iIndex;
    g_iNum = iNum;
    g_iOneWidth = iOneWidth;  //道宽
    g_iHeadHigh = iHeadHigh;   //道头高度
    g_iTitleHigh = iTitleHigh; //道对象高度
    g_iCurveHigh = iCurveHigh;//曲线高度
    g_iMove = iMove;   //道头偏移
    g_iPointNum = iPointNum; // number of points in graph
    g_iLineNum = iLineNum; // number of Line

    //
    qtCommon->readXyRange(configPath, g_iX1, g_iX2, g_iY1, g_iY2);
}
CallManage* MainWindow::getInstanceCallManage()
{
    return CallManage::getInstance();
}
void MainWindow::loadStyle(const QString &qssFile)
{
    //加载样式表
    QString qss;
    QFile file(qssFile);
    if (file.open(QFile::ReadOnly)) {
        //用QTextStream读取样式文件不用区分文件编码 带bom也行
        QStringList list;
        QTextStream in(&file);
        //in.setCodec("utf-8");
        while (!in.atEnd()) {
            QString line;
            in >> line;
            list << line;
        }

        file.close();
        qss = list.join("\n");
        QString paletteColor = qss.mid(20, 7);
        this->setPalette(QPalette(paletteColor));
        //用时主要在下面这句
        this->setStyleSheet(qss);
    }
}

//初始化菜单栏
void MainWindow::initTitleBar()
{
    QMenuBar* m_MenuBar = this->menuBar();
    m_MenuBar->setStyleSheet("QMenuBar{font-size: 10.5pt; min-height:28px;}");

    //
    QMenu* m_projectMenu = this->menuBar()->addMenu(tr("工区管理(&F)"));
    //
    QMenu* m_dataMenu = this->menuBar()->addMenu(tr("数据管理(&D)"));
    //
    QMenu* m_resultMenu = this->menuBar()->addMenu(tr("成果输出(&R)"));
    //
    QMenu* m_analyzeToolMenu = this->menuBar()->addMenu(tr("分析工具(&W)"));
    //
    QMenu* m_SystemToolMenu = this->menuBar()->addMenu(tr("系统工具(&T)"));
    //
    QMenu* m_helpMenu = this->menuBar()->addMenu(tr("帮助(&H)"));
}


//初始化工具栏
void MainWindow::initToolBar()
{
    QSize toolIconSize(18, 18);
    ui->mainToolBar->setIconSize(toolIconSize);   //设置工具栏图标大小

    QIcon newFileIcon(":/image/new.png");
    QIcon openFileIcon(":/image/open.png");
    QIcon compileIcon(":/image/compile.png");
    QIcon runIcon(":/image/capacity.png");
    QIcon debugIcon(":/image/anaysis.png");
    QIcon grepIcon(":/image/grab.png");
    QIcon loadIcon(":/image/export.png");

    m_newAc = new QAction(newFileIcon, "新建项目", this);
    m_openAc = new QAction(openFileIcon, "打开项目", this);
    m_grepAc = new QAction(grepIcon, "可视解释", this);//启用缩放
    m_compileAc = new QAction(compileIcon, "新建道", this);
    m_runAc = new QAction(runIcon, "保存图像", this);
    m_debugAc = new QAction(debugIcon, "画图", this);
    m_loadAc = new QAction(loadIcon, "画线", this);

    ui->mainToolBar->setToolButtonStyle(Qt::ToolButtonTextBesideIcon); //此种方式为文字显示在图标右侧

    //add QAction to Widget.
    ui->mainToolBar->addAction(m_newAc);
    ui->mainToolBar->addAction(m_openAc);
    ui->mainToolBar->addAction(m_grepAc);
    ui->mainToolBar->addAction(m_compileAc);
    ui->mainToolBar->addAction(m_runAc);
    ui->mainToolBar->addAction(m_debugAc);
    ui->mainToolBar->addAction(m_loadAc);

    connect(m_newAc, &QAction::triggered, this, &MainWindow::s_New);
    connect(m_openAc, &QAction::triggered, this, &MainWindow::s_Open);
    connect(m_grepAc, &QAction::triggered, this, &MainWindow::s_showView);//s_Risize
    connect(m_compileAc, &QAction::triggered, this, &MainWindow::s_AddOne);
    connect(m_runAc, &QAction::triggered, this, &MainWindow::s_SaveImage);
    connect(m_debugAc, &QAction::triggered, this, &MainWindow::s_DrawImg);
    connect(m_loadAc, &QAction::triggered, this, &MainWindow::s_DrawLine);
}

//左侧
void MainWindow::initProjectView()
{
//    if (nullptr == m_projectView) {
//        m_projectView = new QDockWidget("项目区", this);
//        m_projectView->setFeatures(QDockWidget::DockWidgetMovable); // | QDockWidget::DockWidgetFloatable QDockWidget::DockWidgetClosable
//        // 设置标题栏字体颜色
//        TotalTitleBar *totalTitleBar = new TotalTitleBar(m_projectView);
//        totalTitleBar->setAttr(QColor(11, 118, 193), 10, "数据组织与管理树", QColor(255, 255, 255));
//        m_projectView->setTitleBarWidget(totalTitleBar);

//        m_projectWidgets = new QtProjectWidgets(this);
//        m_projectView->setWidget(m_projectWidgets);

//        qDebug() << "项目区 id:" << m_projectView->winId() << ", name:" << m_projectView->windowTitle();
//    }
}

//初始化中间区域
void MainWindow::initWorkSpaceView()
{
    if (nullptr == m_stackedWidget_Center) {
        m_centerWidgets = new CustomTabWidget();//中间工作区
        //m_centerWidgets = new MainWindowNew();//中间工作区

        m_stackedWidget_Center = new QStackedWidget;
        m_stackedWidget_Center->addWidget(m_centerWidgets);
        m_stackedWidget_Center->setWindowTitle("工作区");
        //
        m_stackedWidget_Center->setCurrentWidget(m_centerWidgets);//默认展示

        this->setCentralWidget(m_stackedWidget_Center);


        //----
        //MainWindowCurve *mainWindowNew2 = new MainWindowCurve();//中间工作区
        //m_centerWidgets->addTab(mainWindowNew2, "解释视图2");

        //----
        //MainWindowNew *mainWindowNew = new MainWindowNew();//中间工作区
        //m_centerWidgets->addTab(mainWindowNew, "解释视图");

        //
        //加载插件显示
//        QWidget * pMyWidget = CallPlugin::getInstance()->getPluginWidget(MYUNITPLUGIN, NULL);
//        if (pMyWidget != nullptr)
//        {
//            //
//            //直方图，获取当前工程下的slf
//            QVector<QString> vecSlfList;
//            QVector<QString> vecWellList;
//            bool bRet = getAllSlf(g_prjname, vecSlfList, vecWellList);
//            if(bRet)
//            {
//                for(int i=0; i<vecWellList.size(); i++)
//                {
//                    qDebug() << "vecWellList:" << QString::number(i+1) << "=" << vecWellList[i];
//                }
//                for(int i=0; i<vecSlfList.size(); i++)
//                {
//                    qDebug() << "vecSlfList:" << QString::number(i+1) << "=" << vecSlfList[i];
//                }
//            }
//            //关联信号槽，数据传递vecSlfList, vecWellList
//            //...

//            //关联信号槽，数据查看
//            connect(CallManage::getInstance(), SIGNAL(sig_testPlugin(QString)), pMyWidget, SLOT(s_testPlugin(QString)));
//            //
//            m_centerWidgets->addTab(pMyWidget, "插件视图");
//        }
    }
    qDebug() << "工作区 id:" << m_stackedWidget_Center->winId() << ", name:" << m_stackedWidget_Center->windowTitle();
}

//停靠
void MainWindow::dockLayout()
{
    //数据组织与管理树
    QDockWidget *dock1=new QDockWidget(tr("数据组织与管理树"),this);
    dock1->setFeatures(QDockWidget::DockWidgetClosable|QDockWidget::DockWidgetFloatable);//QDockWidget::DockWidgetMovable
    dock1->setAllowedAreas(Qt::LeftDockWidgetArea|Qt::RightDockWidgetArea);
    //
    m_projectWidgets = new QtProjectWidgets(this);
    dock1->setWidget(m_projectWidgets);
    addDockWidget(Qt::LeftDockWidgetArea,dock1);

    //属性编辑器
    m_propertyWidget = PropertyService();
    m_propertyWidget->setWindowTitle("属性编辑器");
    m_propertyWidget->setParent(this);
    addDockWidget( Qt::LeftDockWidgetArea, m_propertyWidget);

    //日志输出窗口
    m_consoleOutputWidget = ConsoleOutService();
    m_consoleOutputWidget->setWindowTitle("输出");
    m_consoleOutputWidget->setParent(this);
    addDockWidget( Qt::LeftDockWidgetArea, m_consoleOutputWidget);

    tabifyDockWidget(m_consoleOutputWidget, m_propertyWidget);

    //
    m_propertyWidget->initWidgetProperty();
}

void MainWindow::s_New()
{
    emit CallManage::getInstance()->sig_NewProject();
}

void MainWindow::s_Open()
{
    //打开
    QString fileFull = "";
    fileFull = QFileDialog::getOpenFileName(this,
                                            tr("打开项目"),
                                            GetProjectFolder(),
                                            tr("项目文件(*.wwl)"));
    if (!fileFull.isEmpty())
    {
        emit CallManage::getInstance()->sig_OpenProject(fileFull);
    }
}

//可视解释
void MainWindow::s_showView()
{
    if(g_prjname=="")
    {
        QMessageBox::information(nullptr, "提示", "请先打开项目！");
        return;
    }

    //Logdata
    QString folderPath;
    folderPath = GetLogdataPath();
    folderPath = folderPath + g_prjname;
    //folderPath = folderPath + "/multiwell.json";

    //打开
    QString fileFull = "";
    fileFull = QFileDialog::getOpenFileName(this,
                                            tr("选择模板"),
                                            folderPath,
                                            tr("多井图文件(*.json)"));
    if (fileFull.isEmpty())
    {
        //----
        MainWindowCurve *mainWindowCurve = new MainWindowCurve();//中间工作区
        m_centerWidgets->addTab(mainWindowCurve, "解释视图");
        return;
    }

    QFileInfo fileInfo(fileFull);
    QString fileName = fileInfo.fileName(); // 获取文件名

    //----
    MainWindowCurve *mainWindowCurve = new MainWindowCurve();//中间工作区
    m_centerWidgets->addTab(mainWindowCurve, fileName);
    mainWindowCurve->Open(fileFull);

    //QFuture<void> future = QtConcurrent::run(std::bind(&MainWindowCurve::s_Open, mainWindowCurve, fileFull));
    //mainWindowCurve->Open(fileFull);

    // 创建 FileSearchThread 实例
//    FileOpenThread *searchThread = new FileOpenThread(fileFull);
//    connect(searchThread, &FileOpenThread::sig_NewWell, mainWindowCurve, &MainWindowCurve::s_NewWell, Qt::BlockingQueuedConnection);
//    connect(searchThread, &FileOpenThread::sig_NewTrackChangeWidth, mainWindowCurve, &MainWindowCurve::s_NewTrackChangeWidth, Qt::BlockingQueuedConnection);
//    connect(searchThread, &FileOpenThread::sig_NewTrack_No_Line, mainWindowCurve, &MainWindowCurve::s_NewTrack_No_Line, Qt::BlockingQueuedConnection);
//    connect(searchThread, &FileOpenThread::sig_AddLine_Property, mainWindowCurve, &MainWindowCurve::s_AddLine_Property, Qt::BlockingQueuedConnection);
//    // 启动搜索线程
//    searchThread->start();

//    // 创建 FileSearchThread 实例
//    FileOpenThread *searchThread = new FileOpenThread(fileFull);
//    connect(searchThread, &FileOpenThread::sig_NewWell, mainWindowCurve, &MainWindowCurve::s_NewWell);//, Qt::BlockingQueuedConnection);
//    connect(searchThread, &FileOpenThread::sig_NewTrackChangeWidth, mainWindowCurve, &MainWindowCurve::s_NewTrackChangeWidth);//, Qt::BlockingQueuedConnection);
//    connect(searchThread, &FileOpenThread::sig_NewTrack_No_Line, mainWindowCurve, &MainWindowCurve::s_NewTrack_No_Line);//, Qt::BlockingQueuedConnection);
//    connect(searchThread, &FileOpenThread::sig_AddLine_Property, mainWindowCurve, &MainWindowCurve::s_AddLine_Property);//, Qt::BlockingQueuedConnection);
//    searchThread->Open(fileFull);
}

void MainWindow::s_Risize()
{
    emit CallManage::getInstance()->sig_Risize();
}

void MainWindow::s_AddOne()
{
    emit CallManage::getInstance()->sig_AddOne();
}

void MainWindow::s_SaveImage()
{
    emit CallManage::getInstance()->sig_SaveImg();
}

void MainWindow::s_DrawImg()
{
    emit CallManage::getInstance()->sig_DrawImg();
}

void MainWindow::s_DrawLine()
{
    //emit CallManage::getInstance()->sig_DrawLine();

    //直方图，获取当前工程下的slf
    QVector<QString> vecSlfList;
    QVector<QString> vecWellList;
    bool bRet = getAllSlf(g_prjname, vecSlfList, vecWellList);
    if(bRet)
    {
        for(int i=0; i<vecWellList.size(); i++)
        {
            qDebug() << "vecWellList:" << QString::number(i+1) << "=" << vecWellList[i];
        }
        for(int i=0; i<vecSlfList.size(); i++)
        {
            qDebug() << "vecSlfList:" << QString::number(i+1) << "=" << vecSlfList[i];
        }
    }

}

void MainWindow::s_CloseProject()
{
//    if(m_centerWidgets)
//    {
//        int iCount = m_centerWidgets->count();
//        for(int i=0; i<iCount; i++)
//        {
//            m_centerWidgets->removeTab(0);
//        }
//    }
}

//曲线数据查看
void MainWindow::s_ShowCurve(QString strSlfName, QString strName)
{
    if(m_centerWidgets)
    {
        WellLogTableDialogNew* pDialog = new WellLogTableDialogNew();
        pDialog->setName(strSlfName, strName);
        m_centerWidgets->addTab(pDialog, strName);
        int iCount = m_centerWidgets->count();
        m_centerWidgets->m_pTabBar->setCurrentIndex(iCount-1);
    }
}