#include "qmycustomplot.h"
#include "CallManage.h"
#include "geometryutils.h"
#include "TransparentDraggableRect.h"

//是否隐藏刻度
extern int g_iShow;

QMyCustomPlot::QMyCustomPlot(QWidget *parent, QString strSlfName, QString strWellName, QString strTrackName, QString strLineName) :
    QCustomPlot(parent)
{    
    m_strSlfName = strSlfName;
    m_strWellName = strWellName;
    m_strTrackName = strTrackName;
    m_strLineName = strLineName;


    setObjectName("QMyCustomPlot");
    //this->setOpenGl(true);//不开启，电脑不支持会卡
    this->setNotAntialiasedElements(QCP::aeAll); // 关闭所有抗锯齿

    //jyl
    if(g_iShow==1)
    {
        yAxis->setTickLabels(true);
    }
    else
    {
        //隐藏刻度
        yAxis->setTickLabels(false);
    }
    //
    xAxis->setTickLabels(false);
    xAxis2->setTickLabels(false);
    yAxis2->setTickLabels(false);

    // make bottom and left axes transfer their ranges to top and right axes:
    connect(xAxis, SIGNAL(rangeChanged(QCPRange)), xAxis2, SLOT(setRange(QCPRange)));
    connect(yAxis, SIGNAL(rangeChanged(QCPRange)), yAxis2, SLOT(setRange(QCPRange)));

    //关联信号槽
    //左刻度
    connect(CallManage::getInstance(), SIGNAL(sig_ChangeLeftScale(QString, QString, QString, QString, QString, double)), this, SLOT(s_ChangeLeftScale(QString, QString, QString, QString, QString, double)));
    //右刻度
    connect(CallManage::getInstance(), SIGNAL(sig_ChangeRightScale(QString, QString, QString, QString, QString, double)), this, SLOT(s_ChangeRightScale(QString, QString, QString, QString, QString, double)));
    //刻度类型
    connect(CallManage::getInstance(), SIGNAL(sig_ChangeScaleType(QString, QString, QString, QString, QString, QString)), this, SLOT(s_ChangeScaleType(QString, QString, QString, QString, QString, QString)));

    //曲线选中，置顶
    connect(CallManage::getInstance(), SIGNAL(sig_Raise(QString, QString, QString, QString, QString)), this, SLOT(s_Raise(QString, QString, QString, QString, QString)));
    //颜色
    connect(CallManage::getInstance(), SIGNAL(sig_ChangeLineColor(QString, QString, QString, QString, QString, QColor)), this, SLOT(s_ChangeLineColor(QString, QString, QString, QString, QString, QColor)));
    //线宽
    connect(CallManage::getInstance(), SIGNAL(sig_ChangeLineWidth(QString, QString, QString, QString, QString, double)), this, SLOT(s_ChangeLineWidth(QString, QString, QString, QString, QString, double)));
    //线型
    connect(CallManage::getInstance(), SIGNAL(sig_ChangeLineStyle(QString, QString, QString, QString, QString, Qt::PenStyle)), this, SLOT(s_ChangeLineStyle(QString, QString, QString, QString, QString, Qt::PenStyle)));
    //岩性填充-不填充
    connect(CallManage::getInstance(), SIGNAL(sig_ClearFillMode(QString, QString, QString, QString, QString)), this, SLOT(s_ClearFillMode(QString, QString, QString, QString, QString)));
    //岩性填充-填充
    connect(CallManage::getInstance(), SIGNAL(sig_ChangeFillMode(QString, QString, QString, QString, QString, QString, QString, QColor, QString, QString, float, float, QString , QColor, QColor, QString, bool)),
            this, SLOT(s_ChangeFillMode(QString, QString, QString, QString, QString, QString, QString, QColor, QString, QString, float, float, QString, QColor, QColor, QString, bool)));

}

void QMyCustomPlot::init(QString strName, QVector<double> xx, QVector<double> yy0)
{
    //raise(); //置于上层显示
}

void QMyCustomPlot::mousePressEvent(QMouseEvent *event)
{
    //qDebug() << "mousePress";
    QCustomPlot::mousePressEvent(event);
}

//槽函数，选中曲线
void QMyCustomPlot::s_LineClicked(int index)
{
//    qDebug() << "s_LineClicked";

//    //全部取消选中
//    deselectAll();

//    //重新选中
//    QCPGraph *graph = this->graph(index);
//    if (graph)
//    {
//        //qDebug() << "s_LineClicked graph";
//        graph->setSelection(QCPDataSelection(graph->data()->dataRange()));

//        QCPPlottableLegendItem *item = legend->itemWithPlottable(graph);
//        if (item)
//        {
//            //qDebug() << "s_LineClicked item";
//            //仅显示当前被选中的曲线
//            item->setSelected(true);
//            replot();
//        }
//    }
}

void QMyCustomPlot::contextMenuEvent(QContextMenuEvent *event)
{
    QMenu menu(this);
    QAction *resetAction = menu.addAction("添加框图");

    m_event = event;
    connect(resetAction, &QAction::triggered, this, &QMyCustomPlot::onAddRect);

//    if (selectedGraphs().size() > 0)//选中曲线
//    {
//          menu.addAction("删除选中曲线", this, SLOT(removeSelectedGraph()));
//    }

    menu.exec(event->globalPos());
}

void QMyCustomPlot::onAddRect()
{
    double right_Hight = xAxis->pixelToCoord(m_event->pos().y());//x轴展示深度
    double left_Low = right_Hight-5;
    //添加图形
    //emit CallManage::getInstance()->sig_addImageToPlot(this, left_Low, right_Hight, ":/image/file.png");
    addImageToPlot(left_Low, right_Hight, ":/image/file.png");

}

void QMyCustomPlot::addImageToPlot(double left_Low, double right_Hight, const QString imagePath)
{
    // 在初始化代码中
    TransparentDraggableRect *dragRect = new TransparentDraggableRect(this);
    // 设置初始范围
    dragRect->setRange(left_Low, right_Hight);
    // 可选：设置颜色
    dragRect->setColor(QColor(255, 100, 100, 80)); // 半透明红色
    //最小宽度
    dragRect->setMinWidth(5);
}

void QMyCustomPlot::onResetZoom()
{

//    //rescaleAxes();
//    //x,y互换
//    yAxis->setRange(m_iX1, m_iX2);
//    xAxis->setRange(m_iY1, m_iY2);
//    //
//    replot();
}

void QMyCustomPlot::removeSelectedGraph()
{
//  if (selectedGraphs().size() > 0)
//  {
//      QString strLineName = selectedGraphs().first()->name();
//      qDebug() << "removeSelectedGraph name=" << strLineName;

//      removeGraph(selectedGraphs().first());
//      replot();

//      //emit CallManage::getInstance()->sig_DelCurve(m_indexID, strLineName);
//  }
}

void QMyCustomPlot::removeSelectedGraphByTitle()
{
//  if (selectedGraphs().size() > 0)
//  {
//      QString strLineName = selectedGraphs().first()->name();
//      qDebug() << "removeSelectedGraph name=" << strLineName;

//      removeGraph(selectedGraphs().first());
//      replot();

//      emit CallManage::getInstance()->sig_DelCurve(m_indexID, strLineName);
//  }
}

void QMyCustomPlot::s_Raise(QString strUuid, QString strSlfName, QString strWellName, QString strTrackName, QString strLineName)
{
    if(m_strUuid == strUuid &&
       m_strSlfName == strSlfName &&
       m_strWellName == strWellName &&
       m_strTrackName == strTrackName &&
       m_strLineName == strLineName)
    {
        raise();
    }
}

//属性-左刻度
void QMyCustomPlot::s_ChangeLeftScale(QString strUuid, QString strSlfName, QString strWellName, QString strTrackName, QString strLineName, double newLeftScale)
{
    if(m_strUuid == strUuid &&
       m_strSlfName == strSlfName &&
       m_strWellName == strWellName &&
       m_strTrackName == strTrackName &&
       m_strLineName == strLineName)
    {
        m_iX1 = newLeftScale;
        yAxis->setRange(m_iX1, m_iX2);
        //
        replot();
    }
    else if(m_strUuid == strUuid &&
            m_strSlfName == strSlfName &&
            m_strWellName == strWellName &&
            m_strTrackName == strTrackName &&
            m_newTargetLine == strLineName)
    {
        //其他曲线
        s_ChangeFillMode(m_strUuid, m_strSlfName, m_strWellName, m_strTrackName, m_strLineName,
                         m_newFillType, m_newTargetLine, m_newColor, m_newLithosImage, m_newHeadFill,
                         newLeftScale, m_vMax, m_strOtherScaleType, m_frontColor, m_backColor, m_newFillMode, true);
    }
}

//属性-右刻度
void QMyCustomPlot::s_ChangeRightScale(QString strUuid, QString strSlfName, QString strWellName, QString strTrackName, QString strLineName, double newRightScale)
{
    if(m_strUuid == strUuid &&
       m_strSlfName == strSlfName &&
       m_strWellName == strWellName &&
       m_strTrackName == strTrackName &&
       m_strLineName == strLineName)
    {
        m_iX2 = newRightScale;
        yAxis->setRange(m_iX1, m_iX2);
        //
        replot();
    }
    else if(m_strUuid == strUuid &&
            m_strSlfName == strSlfName &&
            m_strWellName == strWellName &&
            m_strTrackName == strTrackName &&
            m_newTargetLine == strLineName)
    {
        //其他曲线
        s_ChangeFillMode(m_strUuid, m_strSlfName, m_strWellName, m_strTrackName, m_strLineName,
                         m_newFillType, m_newTargetLine, m_newColor, m_newLithosImage, m_newHeadFill,
                         m_vMin, newRightScale, m_strOtherScaleType, m_frontColor, m_backColor, m_newFillMode, true);
    }
}

//属性-刻度类型
void QMyCustomPlot::s_ChangeScaleType(QString strUuid, QString strSlfName, QString strWellName, QString strTrackName, QString strLineName, QString strScaleType)
{
    if(m_strUuid == strUuid &&
       m_strSlfName == strSlfName &&
       m_strWellName == strWellName &&
       m_strTrackName == strTrackName &&
       m_strLineName == strLineName)
    {
        m_strScaleType = strScaleType;

        if(m_strScaleType=="对数")
        {
            yAxis->setScaleType(QCPAxis::stLogarithmic);
        }
        else //if(m_strScaleType=="线性")
        {
            yAxis->setScaleType(QCPAxis::stLinear);
        }

        //
        replot();
    }
    else if(m_strUuid == strUuid &&
            m_strSlfName == strSlfName &&
            m_strWellName == strWellName &&
            m_strTrackName == strTrackName &&
            m_newTargetLine == strLineName)
    {
        //其他曲线
        s_ChangeFillMode(m_strUuid, m_strSlfName, m_strWellName, m_strTrackName, m_strLineName,
                         m_newFillType, m_newTargetLine, m_newColor, m_newLithosImage, m_newHeadFill,
                         m_vMin, m_vMax, strScaleType, m_frontColor, m_backColor, m_newFillMode, true);
    }
}

//属性-颜色
void QMyCustomPlot::s_ChangeLineColor(QString strUuid, QString strSlfName, QString strWellName, QString strTrackName, QString strLineName, QColor lineColor)
{
    if(m_strUuid == strUuid &&
       m_strSlfName == strSlfName &&
       m_strWellName == strWellName &&
       m_strTrackName == strTrackName &&
       m_strLineName == strLineName)
    {
        QPen pen = this->graph(0)->pen();
        pen.setColor(lineColor);
        graph(0)->setPen(pen);
        //
        replot();
    }
}

//属性-线宽
void QMyCustomPlot::s_ChangeLineWidth(QString strUuid, QString strSlfName, QString strWellName, QString strTrackName, QString strLineName, double width)
{
    if(m_strUuid == strUuid &&
       m_strSlfName == strSlfName &&
       m_strWellName == strWellName &&
       m_strTrackName == strTrackName &&
       m_strLineName == strLineName)
    {
        QPen pen = this->graph(0)->pen();
        pen.setWidthF(width);
        graph(0)->setPen(pen);
        //
        replot();
    }
}

//属性-线型
void QMyCustomPlot::s_ChangeLineStyle(QString strUuid, QString strSlfName, QString strWellName, QString strTrackName, QString strLineName, Qt::PenStyle lineStyle)
{
    if(m_strUuid == strUuid &&
       m_strSlfName == strSlfName &&
       m_strWellName == strWellName &&
       m_strTrackName == strTrackName &&
       m_strLineName == strLineName)
    {
        QPen pen = this->graph(0)->pen();
        pen.setStyle(lineStyle);
        graph(0)->setPen(pen);
        //
        replot();
    }
}

//岩性填充-不填充
void QMyCustomPlot::s_ClearFillMode(QString strUuid, QString strSlfName, QString strWellName, QString strTrackName, QString strLineName)
{
    if(m_strUuid == strUuid &&
       m_strSlfName == strSlfName &&
       m_strWellName == strWellName &&
       m_strTrackName == strTrackName &&
       m_strLineName == strLineName)
    {
        //清空填充
        if(this->graphCount() > 1)
        {
            this->removeGraph(1);
        }
        graph(0)->setBrush(Qt::NoBrush);
        //
        replot();
    }
}

//岩性填充-填充
void QMyCustomPlot::s_ChangeFillMode(QString strUuid, QString strSlfName, QString strWellName, QString strTrackName, QString strLineName,
                                     QString newFillType, QString newTargetLine, QColor newColor, QString newLithosImage, QString newHeadFill,
                                     float vMin, float vMax, QString strOtherScaleType, QColor frontColor, QColor backColor, QString newFillMode, bool bFillNow)
{

    if(m_strUuid == strUuid &&
       m_strSlfName == strSlfName &&
       m_strWellName == strWellName &&
       m_strTrackName == strTrackName &&
       m_strLineName == strLineName)
    {
        //其他曲线
        m_newFillType = newFillType;
        m_newTargetLine = newTargetLine;
        m_newColor = newColor;
        m_newLithosImage = newLithosImage;
        m_newHeadFill = newHeadFill;
        m_vMin = vMin;
        m_vMax = vMax;
        m_strOtherScaleType = strOtherScaleType;
        m_frontColor = frontColor;
        m_backColor = backColor;
        m_newFillMode = newFillMode;
        m_bFillNow = bFillNow;

        //默认true，只有模板存在填充时，才会false
        if(m_bFillNow==false)
        {
            return;
        }
        //填充
        if(this->graphCount() > 1)
        {
            this->removeGraph(1);
        }
        //graph(1)
        QVector<double> x, y;

        if(newTargetLine=="左界道")
        {
            x.append(m_iY1);
            y.append(m_iX1);
            //
            x.append(m_iY2);
            y.append(m_iX1);

            //
            this->addGraph();
        }
        else if(newTargetLine=="右界道")
        {
            x.append(m_iY1);
            y.append(m_iX2);
            //
            x.append(m_iY2);
            y.append(m_iX2);

            //
            this->addGraph();
        }
        else if(newTargetLine=="对称线")
        {
            CLogIO *logio=new CLogIO();
            logio->Open(strSlfName.toStdString().c_str(),CSlfIO::modeRead);
            int index=logio->OpenCurve(strLineName.toStdString().c_str());
            if(index<0)
            {
                delete logio;
            }
            else
            {
                Slf_CURVE curveinfo;
                float *val;
                float sdep,edep,rlev;
                float vmax,vmin;
                //
                logio->GetCurveInfo(index,&curveinfo);
                sdep=curveinfo.StartDepth;
                edep=curveinfo.EndDepth;
                rlev=curveinfo.DepLevel;
                //
                int count=(curveinfo.EndDepth-curveinfo.StartDepth)/curveinfo.DepLevel+1.5;
                val=new float[count];
                logio->ReadCurve(index,curveinfo.StartDepth,count,&val[0]);
                logio->CloseCurve(index);
                delete logio;

                for(int i=0; i<count; i++)
                {
                    x.append(-(sdep+ rlev*i));
                    if(m_strScaleType=="对数")
                    {
                        y.append(log(m_iX1)+log(m_iX2)-log(val[i]));
                    }
                    else //if(m_strScaleType=="线性")
                    {
                        y.append(m_iX1+m_iX2-val[i]);
                    }
                }
            }
            //
            this->yAxis2->setRange(m_iY1, m_iY2);
            if(m_strScaleType=="对数")
            {
                this->xAxis2->setRange(log(m_iX1), log(m_iX2));
            }
            else //if(m_strScaleType=="线性")
            {
                this->xAxis2->setRange(m_iX1, m_iX2);
            }
            this->addGraph(yAxis2, xAxis2);
        }
        else//其他曲线
        {
            if(newFillMode=="左填充")
            {
                float iX1_Tmp=m_iX1;
                float iX2_Tmp=m_iX2;
                if(m_strScaleType=="对数")
                {
                    iX1_Tmp=log(m_iX1);
                    iX2_Tmp=log(m_iX2);
                }

                //其他曲线（左填充）
                CLogIO *logio=new CLogIO();
                logio->Open(strSlfName.toStdString().c_str(),CSlfIO::modeRead);

                //读取基线信息
                int indexBaseCurv = logio->OpenCurve(strLineName.toStdString().c_str());
                if(indexBaseCurv < 0) {
                    this->addGraph();//空曲线
                    delete logio;
                }
                else
                {
                    //其他曲线
                    int index=logio->OpenCurve(newTargetLine.toStdString().c_str());
                    if(index<0)
                    {
                        this->addGraph();//空曲线
                        delete logio;
                    }
                    else
                    {
                        Slf_CURVE curveinfo;
                        float *val;
                        float sdep,edep,rlev;
                        //
                        logio->GetCurveInfo(index,&curveinfo);
                        sdep=curveinfo.StartDepth;
                        edep=curveinfo.EndDepth;
                        rlev=curveinfo.DepLevel;
                        //
                        int count=(curveinfo.EndDepth-curveinfo.StartDepth)/curveinfo.DepLevel+1.5;
                        val=new float[count];
                        logio->ReadCurve(index,curveinfo.StartDepth,count,&val[0]);
                        logio->CloseCurve(index);
                        //读完基线再关闭
    //                    delete logio;

                        float vMax_Tmp=vMax;
                        float vMin_Tmp=vMin;
                        if(strOtherScaleType=="对数")
                        {
                            vMax_Tmp=log(vMax);
                            vMin_Tmp=log(vMin);
                        }

                        float newVal = 0.0;
                        for(int i=0; i<count; i++)
                        {
                            float x0=-(sdep+ rlev*i);
                            float y0_old=val[i];
                            float y0 = (iX2_Tmp-iX1_Tmp)*(val[i]-vMin_Tmp)/(vMax_Tmp-vMin) + iX1_Tmp;
                            if(strOtherScaleType=="对数")
                            {
                                //其他曲线
                                y0_old=log(val[i]);
                                y0 = (iX2_Tmp-iX1_Tmp)*(log(val[i])-vMin_Tmp)/(vMax_Tmp-vMin_Tmp) + iX1_Tmp;
                            }

                            //读取基线
                            float BaseY0=0;
                            float BaseY0_Tmp=0;
                            logio->ReadCurve(indexBaseCurv, 0-x0, 1, &BaseY0);
                            if(m_strScaleType=="对数")
                            {
                                BaseY0_Tmp=log(BaseY0);
                                BaseY0 = BaseY0_Tmp;
                            }

                            //
                            if(i+1<count)
                            {
                                float x1=-(sdep+ rlev*(i+1));
                                //float y1=val[i+1];
                                float y1 = (iX2_Tmp-iX1_Tmp)*(val[i+1]-vMin_Tmp)/(vMax_Tmp-vMin_Tmp) + iX1_Tmp;
                                if(strOtherScaleType=="对数")
                                {
                                    //其他曲线
                                    y1 = (iX2_Tmp-iX1_Tmp)*(log(val[i+1])-vMin_Tmp)/(vMax_Tmp-vMin_Tmp) + iX1_Tmp;
                                }

                                //读取基线
                                float BaseY1=0;
                                float BaseY1_Tmp=0;
                                logio->ReadCurve(indexBaseCurv, 0-x1, 1, &BaseY1);
                                if(m_strScaleType=="对数")
                                {
                                    BaseY1_Tmp=log(BaseY1);
                                    BaseY1 = BaseY1_Tmp;
                                }

                                if(BaseY0<=y0 && BaseY1<=y1)
                                {
                                    //基线在左，采用基线值
                                    //y0=BaseY0;
                                    y0_old = (BaseY0-iX1_Tmp)/(iX2_Tmp-iX1_Tmp)*(vMax_Tmp-vMin_Tmp) + vMin_Tmp;
                                    //
                                    x.append(x0);
                                    y.append(y0_old);
                                }
                                else if(BaseY0>=y0 && BaseY1>=y1)
                                {
                                    //基线在右，直接赋值
                                    x.append(x0);
                                    y.append(y0_old);
                                }
                                else if(BaseY0<=y0 && BaseY1>=y1)
                                {
                                    //基线起点在左，采用基线值
                                    //y0=BaseY0;
                                    y0_old = (BaseY0-iX1_Tmp)/(iX2_Tmp-iX1_Tmp)*(vMax_Tmp-vMin_Tmp) + vMin_Tmp;
                                    //
                                    x.append(x0);
                                    y.append(y0_old);

                                    //插值
                                    float xNew=x0-rlev*(y0-BaseY0)/((BaseY1-y1)+(y0-BaseY0));//(BaseY1-y1);
                                    float yNew=(y0-y1)/(x0-x1)*(xNew-x1) + y1;
                                    float yNew_Old=(yNew-iX1_Tmp)/(iX2_Tmp-iX1_Tmp)*(vMax_Tmp-vMin_Tmp) + vMin_Tmp;
                                    //
                                    x.append(xNew);
                                    y.append(yNew_Old);
                                }
                                else if(BaseY0>=y0 && BaseY1<=y1)
                                {
                                    //基线在右，直接赋值
                                    x.append(x0);
                                    y.append(y0_old);

                                    //插值
                                    float xNew=x0-rlev*(y0-BaseY0)/((BaseY1-y1)+(y0-BaseY0));//(BaseY1-y1);
                                    float yNew=(BaseY0-BaseY1)/(x0-x1)*(xNew-x1) + BaseY1;
                                    float yNew_Old=(yNew-iX1_Tmp)/(iX2_Tmp-iX1_Tmp)*(vMax_Tmp-vMin_Tmp) + vMin_Tmp;
                                    //
                                    x.append(xNew);
                                    y.append(yNew_Old);
                                }
                            }
                            else
                            {
                                //最后一个点
                                if(BaseY0<y0)
                                {
                                    //基线在左，采用基线值
                                    //y0=BaseY0;
                                    y0_old = (BaseY0-iX1_Tmp)/(iX2_Tmp-iX1_Tmp)*(vMax_Tmp-vMin_Tmp) + vMin_Tmp;
                                }
                                x.append(x0);
                                y.append(y0_old);
                            }
                        }
                        logio->CloseCurve(indexBaseCurv);
                        delete logio;
                        //
                        this->yAxis2->setRange(m_iY1, m_iY2);
                        this->xAxis2->setRange(vMin_Tmp, vMax_Tmp);
                        this->addGraph(yAxis2, xAxis2);
                    }
                }
            }
            else if(newFillMode=="右填充")
            {
                float iX1_Tmp=m_iX1;
                float iX2_Tmp=m_iX2;
                if(m_strScaleType=="对数")
                {
                    iX1_Tmp=log(m_iX1);
                    iX2_Tmp=log(m_iX2);
                }

                //其他曲线（右填充）
                CLogIO *logio=new CLogIO();
                logio->Open(strSlfName.toStdString().c_str(),CSlfIO::modeRead);

                //读取基线信息
                int indexBaseCurv = logio->OpenCurve(strLineName.toStdString().c_str());
                if(indexBaseCurv < 0) {
                    this->addGraph();//空曲线
                    delete logio;
                }
                else
                {
                    //其他曲线
                    int index=logio->OpenCurve(newTargetLine.toStdString().c_str());
                    if(index<0)
                    {
                        this->addGraph();//空曲线
                        delete logio;
                    }
                    else
                    {
                        Slf_CURVE curveinfo;
                        float *val;
                        float sdep,edep,rlev;
                        //
                        logio->GetCurveInfo(index,&curveinfo);
                        sdep=curveinfo.StartDepth;
                        edep=curveinfo.EndDepth;
                        rlev=curveinfo.DepLevel;
                        //
                        int count=(curveinfo.EndDepth-curveinfo.StartDepth)/curveinfo.DepLevel+1.5;
                        val=new float[count];
                        logio->ReadCurve(index,curveinfo.StartDepth,count,&val[0]);
                        logio->CloseCurve(index);
                        //读完基线再关闭
    //                    delete logio;

                        float vMax_Tmp=vMax;
                        float vMin_Tmp=vMin;
                        if(strOtherScaleType=="对数")
                        {
                            vMax_Tmp=log(vMax);
                            vMin_Tmp=log(vMin);
                        }

                        float newVal = 0.0;
                        for(int i=0; i<count; i++)
                        {
                            float x0=-(sdep+ rlev*i);
                            float y0_old=val[i];
                            float y0 = (iX2_Tmp-iX1_Tmp)*(val[i]-vMin_Tmp)/(vMax_Tmp-vMin_Tmp) + iX1_Tmp;
                            if(strOtherScaleType=="对数")
                            {
                                //其他曲线
                                y0_old=log(val[i]);
                                y0 = (iX2_Tmp-iX1_Tmp)*(log(val[i])-vMin_Tmp)/(vMax_Tmp-vMin_Tmp) + iX1_Tmp;
                            }

                            //读取基线
                            float BaseY0=0;
                            float BaseY0_Tmp=0;
                            logio->ReadCurve(indexBaseCurv, 0-x0, 1, &BaseY0);
                            if(m_strScaleType=="对数")
                            {
                                BaseY0_Tmp=log(BaseY0);
                                BaseY0 = BaseY0_Tmp;
                            }

                            //
                            if(i+1<count)
                            {
                                float x1=-(sdep+ rlev*(i+1));
                                //float y1=val[i+1];
                                float y1 = (iX2_Tmp-iX1_Tmp)*(val[i+1]-vMin_Tmp)/(vMax_Tmp-vMin_Tmp) + iX1_Tmp;
                                if(strOtherScaleType=="对数")
                                {
                                    //其他曲线
                                    y1 = (iX2_Tmp-iX1_Tmp)*(log(val[i+1])-vMin_Tmp)/(vMax_Tmp-vMin_Tmp) + iX1_Tmp;
                                }

                                //读取基线
                                float BaseY1=0;
                                float BaseY1_Tmp=0;
                                logio->ReadCurve(indexBaseCurv, 0-x1, 1, &BaseY1);
                                if(m_strScaleType=="对数")
                                {
                                    BaseY1_Tmp=log(BaseY1);
                                    BaseY1 = BaseY1_Tmp;
                                }

                                if(BaseY0<=y0 && BaseY1<=y1)
                                {
                                    //基线在左，直接赋值
                                    x.append(x0);
                                    y.append(y0_old);
                                }
                                else if(BaseY0>=y0 && BaseY1>=y1)
                                {
                                    //基线在右，采用基线值
                                    //y0=BaseY0;
                                    y0_old = (BaseY0-iX1_Tmp)/(iX2_Tmp-iX1_Tmp)*(vMax_Tmp-vMin_Tmp) + vMin_Tmp;
                                    //
                                    x.append(x0);
                                    y.append(y0_old);
                                }
                                else if(BaseY0<=y0 && BaseY1>=y1)
                                {
                                    //基线起点在左，直接赋值
                                    x.append(x0);
                                    y.append(y0_old);

                                    //插值
                                    float xNew=x0-rlev*(y0-BaseY0)/((BaseY1-y1)+(y0-BaseY0));//(BaseY1-y1);
                                    float yNew=(y0-y1)/(x0-x1)*(xNew-x1) + y1;
                                    float yNew_Old=(yNew-iX1_Tmp)/(iX2_Tmp-iX1_Tmp)*(vMax_Tmp-vMin_Tmp) + vMin_Tmp;
                                    //
                                    x.append(xNew);
                                    y.append(yNew_Old);
                                }
                                else if(BaseY0>=y0 && BaseY1<=y1)
                                {
                                    //基线在右，采用基线值
                                    //y0=BaseY0;
                                    y0_old = (BaseY0-iX1_Tmp)/(iX2_Tmp-iX1_Tmp)*(vMax_Tmp-vMin_Tmp) + vMin_Tmp;
                                    //
                                    x.append(x0);
                                    y.append(y0_old);

                                    //插值
                                    float xNew=x0-rlev*(y0-BaseY0)/((BaseY1-y1)+(y0-BaseY0));//(BaseY1-y1);
                                    float yNew=(BaseY0-BaseY1)/(x0-x1)*(xNew-x1) + BaseY1;
                                    float yNew_Old=(yNew-iX1_Tmp)/(iX2_Tmp-iX1_Tmp)*(vMax_Tmp-vMin_Tmp) + vMin_Tmp;
                                    //
                                    x.append(xNew);
                                    y.append(yNew_Old);
                                }
                            }
                            else
                            {
                                //最后一个点
                                if(BaseY0>y0)
                                {
                                    //基线在右，采用基线值
                                    //y0=BaseY0;
                                    y0_old = (BaseY0-iX1_Tmp)/(iX2_Tmp-iX1_Tmp)*(vMax_Tmp-vMin_Tmp) + vMin_Tmp;
                                }
                                x.append(x0);
                                y.append(y0_old);
                            }
                        }
                        logio->CloseCurve(indexBaseCurv);
                        delete logio;
                        //
                        this->yAxis2->setRange(m_iY1, m_iY2);
                        this->xAxis2->setRange(vMin_Tmp, vMax_Tmp);
                        this->addGraph(yAxis2, xAxis2);
                    }
                }
            }
            else //填充
            {
                //其他曲线
                CLogIO *logio=new CLogIO();
                logio->Open(strSlfName.toStdString().c_str(),CSlfIO::modeRead);
                int index=logio->OpenCurve(newTargetLine.toStdString().c_str());
                if(index<0)
                {
                    this->addGraph();

                    delete logio;
                }
                else
                {
                    Slf_CURVE curveinfo;
                    float *val;
                    float sdep,edep,rlev;
                    //
                    logio->GetCurveInfo(index,&curveinfo);
                    sdep=curveinfo.StartDepth;
                    edep=curveinfo.EndDepth;
                    rlev=curveinfo.DepLevel;
                    //
                    int count=(curveinfo.EndDepth-curveinfo.StartDepth)/curveinfo.DepLevel+1.5;
                    val=new float[count];
                    logio->ReadCurve(index,curveinfo.StartDepth,count,&val[0]);
                    logio->CloseCurve(index);
                    delete logio;

                    float vMax_Tmp=vMax;
                    float vMin_Tmp=vMin;
                    if(strOtherScaleType=="对数")
                    {
                        vMax_Tmp=log(vMax);
                        vMin_Tmp=log(vMin);
                    }

                    float newVal = 0.0;
                    for(int i=0; i<count; i++)
                    {
                        x.append(-(sdep+ rlev*i));
                        //newVal = (m_iX2-m_iX1)*(val[i]-vMin)/(vMax-vMin) + m_iX1;
                        newVal = val[i];
                        if(strOtherScaleType=="对数")
                        {
                            //其他曲线
                            newVal = log(val[i]);
                        }
                        y.append(newVal);
                    }
                    this->yAxis2->setRange(m_iY1, m_iY2);
                    this->xAxis2->setRange(vMin_Tmp, vMax_Tmp);
                    this->addGraph(yAxis2, xAxis2);
                }
            }
        }


        this->graph(1)->setData(x, y);
        graph(1)->setLineStyle(graph(0)->lineStyle());//曲线
        graph(1)->setScatterStyle(graph(0)->scatterStyle());
        //graph(1)->setPen(QColor(255, 255, 255));
        graph(1)->setPen(QColor(0, 0, 0));//(graph(0)->pen());

        //
        if(newFillType == "岩性模式")
        {
            QColor oldFrontColor(0, 0, 0); // 原始颜色
            QColor oldBackColor(255, 255, 255); // 原始颜色
            //
            QImage image(newLithosImage);
            for (int y = 0; y < image.height(); ++y) {
                for (int x = 0; x < image.width(); ++x) {
                    QColor pixelColor = QColor(image.pixel(x, y));
                    if (pixelColor == oldFrontColor) {
                        image.setPixelColor(x, y, m_frontColor); // 使用 setPixelColor 来设置新颜色
                    }
                    if (pixelColor == oldBackColor) {
                        image.setPixelColor(x, y, m_backColor); // 使用 setPixelColor 来设置新颜色
                    }
                }
            }

            //
            graph(0)->setBrush(QBrush(QPixmap::fromImage(image)));
            //graph(0)->setBrush(QBrush(QPixmap(newLithosImage)));
        }
        else if(newFillType == "颜色模式")
        {
            graph(0)->setBrush(QBrush(newColor));
        }
        else if(newFillType == "成像化")
        {

        }
        graph(0)->setChannelFillGraph( this->graph(1));
        //
        replot();
        //update();
    }
}

void QMyCustomPlot::mouseMoveEvent(QMouseEvent *event)
{
    // 当前鼠标位置（像素坐标）
    //int x_pos = event->pos().x();
    int y_pos = event->pos().y();

    // 像素坐标转成实际的x,y轴的坐标
    //float x_val = yAxis->pixelToCoord(x_pos);
    float y_val = xAxis->pixelToCoord(y_pos);

    emit CallManage::getInstance()->sig_MouseMove(m_strUuid, m_strWellName, m_strTrackName, 0-y_val);

    QCustomPlot::mouseMoveEvent(event);
}


void QMyCustomPlot::addRandomGraph(QVector<double> x, QVector<double> y, QString strSlfName, QString strLineName, QString strAliasName, QString strUnit,
                              double newLeftScale, double newRightScale, QString strScaleType, QColor newlineColor, double width, Qt::PenStyle lineStyle)
{
//AppendConsole(PAI_INFO, "FormDraw addRandomGraph");

    m_x.append(x);
    m_y.append(y);

    addGraph();
    if(strLineName=="")
    {
        strLineName = QString("曲线 %1").arg(graphCount());
    }
    graph()->setName(strLineName);
    //禁用自动重绘：在大量数据更新前禁用自动重绘
    //setNotAntialiasedElements(QCP::aeAll);

    //graph()->setData(x, y);

    if(newLeftScale!=-9999)
    {
        graph()->setLineStyle((QCPGraph::LineStyle)(lineStyle));//曲线

        graph()->setScatterStyle(QCPScatterStyle((QCPScatterStyle::ScatterShape)(1)));

        QPen graphPen;
        graphPen.setColor(newlineColor);
        graphPen.setWidthF(width);
        graphPen.setStyle(lineStyle);//实线
        graph()->setPen(graphPen);
    }
    else
    {
        graph()->setLineStyle((QCPGraph::LineStyle)(1));//曲线


        graph()->setScatterStyle(QCPScatterStyle((QCPScatterStyle::ScatterShape)(1)));
    //    graph()->setScatterStyle(QCPScatterStyle(QPixmap(":/image/file.png")));
        //graph()->setScatterStyle(QCPScatterStyle(QCPScatterStyle::ssDisc, 5));

        QPen graphPen;
        newlineColor = QColor(std::rand()%245+10, std::rand()%245+10, std::rand()%245+10);
        graphPen.setColor(newlineColor);
        width = 2;
        graphPen.setWidthF(width);
        graphPen.setStyle(Qt::SolidLine);//实线
        graph()->setPen(graphPen);
        //replot();
    }


    if(x.size()<m_iSplitNum)
    {
        graph()->setData(x, y);
        replot();
        //replot(QCustomPlot::rpRefreshHint);// 仅刷新可见部分，跳过轴计算等
    }
    else
    {
        graph()->setData(x.mid(0,m_iSplitNum), y.mid(0,m_iSplitNum));
        replot();

        m_iCurNum = m_iSplitNum;
        QTimer::singleShot(100, this, SLOT(slot_time()));
    }

}

void QMyCustomPlot::slot_time()
{
    if(m_iCurNum >= m_x.size())
    {
        //处理完成
        return;
    }

    //
    if(m_x.size() <= m_iCurNum+m_iSplitNum)
    {
        graph()->addData(m_x.mid(m_iCurNum), m_y.mid(m_iCurNum));
        m_iCurNum = m_x.size();
        //处理完成，填充
        //默认true，只有模板存在填充时，才会false
        if(m_bFillNow==false)
        {
            s_ChangeFillMode(m_strUuid, m_strSlfName, m_strWellName, m_strTrackName, m_strLineName,
                          m_newFillType, m_newTargetLine, m_newColor, m_newLithosImage, m_newHeadFill,
                          m_vMin, m_vMax, m_strOtherScaleType, m_frontColor, m_backColor, m_newFillMode, true);

        }
        replot();
    }
    else
    {
        graph()->addData(m_x.mid(m_iCurNum, m_iSplitNum), m_y.mid(m_iCurNum, m_iSplitNum));
        m_iCurNum = m_iCurNum + m_iSplitNum;
        //replot();
        QTimer::singleShot(100, this, SLOT(slot_time()));
    }
    //replot();
}