插件优化

CallManage/CallManage.h

@@ -133,6 +133,9 @@ signals:
     //改变缩放比例
     void sig_changeScale(int iNewScale);
 
+    //改变道宽
+    void sig_changeWidth(QString strUuid, QString strSlfName, QString strWellName, QString strTrackName, int iCurrentCol, int iNewWidth);
+
     //
     //void sig_addImageToPlot(QMyCustomPlot* customPlot, double left_Low, double right_Hight, QString imagePath);
 

include/PluginName.h

@@ -3,6 +3,7 @@
 
 //插件名定义
 #define MYUNITPLUGIN             "MyUnitPlugin"             //插件
+#define PLUGINUNIT             	 "PluginUnit"             	//插件
 
 
 #endif // PLUGINNAME_H

logPlus/DrawTvd.cpp

@@ -570,30 +570,30 @@ void CDrawTvd::DrawClient(QPainter* pdc,QRectF mrt)
 
 double GetPixelPerCm()
 {
-    double g_logicalDpi;
+    double logicalDpi;
-    double g_dPixelPerCm = 1;//每厘米像素数
+    double dPixelPerCm = 1;//每厘米像素数
 
     // 获取当前屏幕
     QScreen *screen = QGuiApplication::primaryScreen();
     if (screen) {
         // 获取逻辑DPI
-        g_logicalDpi = screen->logicalDotsPerInch();
+        logicalDpi = screen->logicalDotsPerInch();
-        qDebug() << "Logical DPI:" << QString::number(g_logicalDpi);
+        qDebug() << "Logical DPI:" << QString::number(logicalDpi);
 
-        if(g_logicalDpi==0)
+        if(logicalDpi==0)
         {
             // 获取物理DPI
             double physicalDpi = screen->physicalDotsPerInch();
             qDebug() << "Physical DPI:" << QString::number(physicalDpi);
-            g_logicalDpi = physicalDpi;
+            logicalDpi = physicalDpi;
         }
 
         //每厘米像素数
-        g_dPixelPerCm = g_logicalDpi/2.54;
+        dPixelPerCm = logicalDpi/2.54;
     } else {
         qDebug() << "No screen available";
     }
-    return g_dPixelPerCm;
+    return dPixelPerCm;
 }
 
 void CDrawTvd::DrawTvd(QPainter* pDC,QRectF mrt)

logPlus/PropertyWidget.cpp

@@ -198,6 +198,18 @@ void PropertyWidget::SlotPropertyChanged( QtProperty *pProperty, const QVariant
             emit CallManage::getInstance()->sig_changeScale(g_iScale);
         }
     }
+    else if("道宽(cm)" == m_propertyData[pProperty])
+    {
+        //qDebug() << "终止深度(m)->改变";
+        //当前属性类型
+        if(m_strCurrentProperty == Track_Property)
+        {
+            double newWidth = variant.value<double>();
+            newWidth = newWidth * g_dPixelPerCm;
+            //通知界面缩放
+            emit CallManage::getInstance()->sig_changeWidth(m_strUuid, m_strSlfName, m_strWellName, m_strTrackName, m_iCurrentCol, newWidth);
+        }
+    }
     else if("左刻度" == m_propertyData[pProperty])
     {
         //qDebug() << "左刻度->改变";
@@ -783,6 +795,27 @@ void PropertyWidget::initWellProperty()
     _CreateVariantPropertyItem("通常", "终止深度(m)", 0-g_iY1, QVariant::Double);
 }
 
+void PropertyWidget::initTrackProperty(QTableWidgetItem *item, int iWidth, QMyTableWidget *myTableWidget, int iCurrentCol)
+{
+    //初始化，清空
+    InitCurrentViewInfo();
+    //
+    m_myTableWidget = myTableWidget;
+    m_iCurrentCol = iCurrentCol;
+    //
+    m_strTrackName = item->text();
+    m_strUuid = item->data(Qt::UserRole+1).toString();
+    m_strWellName = item->data(Qt::UserRole+2).toString();
+    m_strSlfName = item->data(Qt::UserRole+3).toString();
+
+    //当前属性类型
+    m_strCurrentProperty = Track_Property;
+
+    //
+    double cmWidth = (double)iWidth/(double)g_dPixelPerCm;
+    _CreateVariantPropertyItem("通常", "道宽(cm)", cmWidth, QVariant::Double);
+}
+
 void PropertyWidget::initCurveProperty(FormInfo *formInfo, QStringList strListOtherLine, QList<float> listMin, QList<float> listMax, QStringList strListOtherScaleType)
 {
     //初始化，清空

logPlus/PropertyWidget.h

@@ -17,10 +17,12 @@
 //
 #include "forminfo.h"
 #include "formhead.h"
+#include "qmytablewidget.h"
 
 //当前曲线类型
 #define Widget_Property "Widget_Property"
 #define Well_Property   "Well_Property"     //井
+#define Track_Property  "Track_Property"    //道
 #define Curve_Property  "Curve_Property"    //曲线
 #define Head_Property   "Head_Property"     //图头，单元格
 
@@ -69,6 +71,10 @@ public:
     double m_colWidth = 1;
     double m_rowHeight = 1;
 
+    //道
+    QMyTableWidget *m_myTableWidget;
+    int m_iCurrentCol;
+
     bool m_bSelfChange=false;
 public:
     QWidget* GetPropertyWidget();
@@ -81,6 +87,8 @@ public:
     void initWidgetProperty();  //可视解释整体属性
     //井
     void initWellProperty();
+    //道
+    void initTrackProperty(QTableWidgetItem *item, int iWidth, QMyTableWidget *myTableWidget, int iCurrentCol);
     //曲线
     void initCurveProperty(FormInfo *formInfo, QStringList strListOtherLine, QList<float> listMin, QList<float> listMax, QStringList strListOtherScaleType);
     //图头

logPlus/formdraw.cpp

@@ -518,6 +518,40 @@ void FormDraw::s_mouseWheel(QWheelEvent *event)
     emit CallManage::getInstance()->sig_mouseWheel(event);
 }
 
+void FormDraw::setColWidth(int iNewWidth)
+{
+    // 获取当前widget的所有子控件
+    const QObjectList &children = this->children();
+    //判断为空
+    int columnCount = children.size();
+    if(columnCount==0)
+    {
+        return;
+    }
+    int i=0;
+    // 遍历子控件列表
+    for (QObject *child : children) {
+        // 判断子控件是否为QWidget类型
+        if (QWidget *childWidget = qobject_cast<QWidget *>(child)) {
+            // 打印子控件的信息，使用缩进表示层级关系
+            //qDebug() << QString("%1").arg(childWidget->objectName());
+            QString strObjName = childWidget->objectName();
+            if(strObjName=="QMyCustomPlot")
+            {
+                //
+                QMyCustomPlot *form = (QMyCustomPlot*)childWidget;
+                if(form)
+                {
+                    int dHight = form->geometry().height();
+                    form->setGeometry(0, 0, iNewWidth, (int)dHight);//7500-3184
+                    form->replot();//屏蔽，缩减时间
+                }
+            }
+        }
+        i++;
+    }
+}
+
 void FormDraw::setRowHeight(double dHight, QProgressBar *progressBar, int iSplit)
 {
     int iBeginValue = progressBar->value();

logPlus/formdraw.h

@@ -64,6 +64,7 @@ public slots:
     void s_mouseWheel(QWheelEvent *event);
 
     void setRowHeight(double dHight, QProgressBar *progressBar, int iSplit);
+    void setColWidth(int iNewWidth);
 
 public:
     QString m_strUuid;

logPlus/formtrack.cpp

@@ -41,6 +41,9 @@ FormTrack::FormTrack(QWidget *parent, QString strWellName, QString strTrackName)
         header->setSectionResizeMode(i, QHeaderView::Stretch);
     }
 
+    // 设置选择模式为单选模式
+    ui->tableWidget->setSelectionMode(QAbstractItemView::SingleSelection);
+
     //曲线
     connect(this, SIGNAL(sig_AddLine(QString, QString, QString, QString, QString, QString, QColor, double, float, float, QString)),
             this, SLOT(s_addLine(QString, QString, QString, QString, QString, QString, QColor, double, float, float, QString)));

logPlus/formwell.cpp

@@ -317,6 +317,32 @@ void FormWell::s_NewTrack_No_Line(QString strUuid, QString strWellName, QString
     }
 }
 
+int FormWell::setColWidth(int iCurrentCol, int iNewWidth)
+{
+    //设置列宽
+    ui->tableWidget->setColumnWidth(iCurrentCol, iNewWidth);
+
+    auto myWidget = ui->tableWidget->cellWidget(2, iCurrentCol);
+    if(myWidget)
+    {
+        //
+        FormDraw *formDraw = (FormDraw*)myWidget;//获得widget
+        if(formDraw)
+        {
+            formDraw->setColWidth(iNewWidth);
+        }
+    }
+
+    //计算井宽
+    int iWellWidth = 0;
+    int columnCount = ui->tableWidget->columnCount();//总列数
+    for(int i=0; i<columnCount; i++)
+    {
+        iWellWidth += ui->tableWidget->columnWidth(i);
+    }
+    return iWellWidth;
+}
+
 void FormWell::setRowHeight(double dHight, QProgressBar *progressBar, int iSplit)
 {
     //设置高度

logPlus/formwell.h

@@ -35,6 +35,8 @@ public:
     QStringList getLineList(QString strWellName, QString strTrackName);
 
     void setRowHeight(double dHight, QProgressBar *progressBar, int iSplit);
+    //设置道宽
+    int setColWidth(int iCurrentCol, int iNewWidth);
 
 public slots:
     void s_NewCol(QStringList listdt);

logPlus/mainwindow.cpp

@@ -225,6 +225,7 @@ void MainWindow::initToolBar()
 
     connect(m_newprojectAc, &QAction::triggered, this, &MainWindow::s_New);
     connect(m_openprojectAc, &QAction::triggered, this, &MainWindow::s_Open);
+    connect(m_saveprojectAc, &QAction::triggered, this, &MainWindow::s_SaveProject);
     connect(m_wellsectionwindowAc, &QAction::triggered, this, &MainWindow::s_showView);
     connect(m_developmentAc, &QAction::triggered, this, &MainWindow::s_development);
 
@@ -276,35 +277,6 @@ void MainWindow::initWorkSpaceView()
         //MainWindowNew *mainWindowNew = new MainWindowNew();//中间工作区
         //m_centerWidgets->addTab(mainWindowNew, "解释视图");
 
-        //
-        //加载插件显示
-//        QWidget * pMyWidget = CallPlugin::getInstance()->getPluginWidget(MYUNITPLUGIN, NULL);
-//        if (pMyWidget != nullptr)
-//        {
-//            //
-//            //直方图，获取当前工程下的slf
-//            QVector<QString> vecSlfList;
-//            QVector<QString> vecWellList;
-//            bool bRet = getAllSlf(g_prjname, vecSlfList, vecWellList);
-//            if(bRet)
-//            {
-//                for(int i=0; i<vecWellList.size(); i++)
-//                {
-//                    qDebug() << "vecWellList:" << QString::number(i+1) << "=" << vecWellList[i];
-//                }
-//                for(int i=0; i<vecSlfList.size(); i++)
-//                {
-//                    qDebug() << "vecSlfList:" << QString::number(i+1) << "=" << vecSlfList[i];
-//                }
-//            }
-//            //关联信号槽，数据传递vecSlfList, vecWellList
-//            //...
-
-//            //关联信号槽，数据查看
-//            connect(CallManage::getInstance(), SIGNAL(sig_testPlugin(QString)), pMyWidget, SLOT(s_testPlugin(QString)));
-//            //
-//            m_centerWidgets->addTab(pMyWidget, "插件视图");
-//        }
     }
     qDebug() << "工作区 id:" << m_stackedWidget_Center->winId() << ", name:" << m_stackedWidget_Center->windowTitle();
 }
@@ -358,6 +330,41 @@ void MainWindow::s_Open()
     }
 }
 
+void MainWindow::s_SaveProject()
+{
+    //加载插件显示
+    QWidget * pMyWidget = CallPlugin::getInstance()->getPluginWidget(PLUGINUNIT, (QWidget *)this);
+    if (pMyWidget != nullptr)
+    {
+        //
+        m_centerWidgets->addTab(pMyWidget, "插件视图");
+    }
+
+    //设置参数
+    QString strParams = "hello";
+    CallPlugin::getInstance()->setPluginParams(PLUGINUNIT, strParams);
+
+    //获取参数
+    QString strParams2 = CallPlugin::getInstance()->getPluginParams(PLUGINUNIT);
+    qDebug() << "getPluginParams: " << strParams2;
+
+//    //加载插件显示
+//    QWidget * pMyWidget = CallPlugin::getInstance()->getPluginWidget(MYUNITPLUGIN, NULL);
+//    if (pMyWidget != nullptr)
+//    {
+//        //
+//        m_centerWidgets->addTab(pMyWidget, "插件视图");
+//    }
+//    //插件测试(信号槽)
+//    emit CallManage::getInstance()->sig_testPlugin("hello");
+}
+
+//收到插件消息
+void MainWindow::s_PluginMsg(QString msg)
+{
+    qDebug() << "s_PluginMsg:" << msg;
+}
+
 //可视解释
 void MainWindow::s_showView()
 {

logPlus/mainwindow.h

@@ -76,6 +76,7 @@ public:
 public slots:
     void s_New();
     void s_Open();
+    void s_SaveProject();
     void s_CloseProject();
 
     void s_Risize();
@@ -93,6 +94,9 @@ public slots:
     void s_ShowTable(QString strSlfName, QString strName);//表格数据查看
     void s_WelllogInformation(QString strSlfName);//编辑测井信息
 
+    //插件消息
+    void s_PluginMsg(QString msg);
+
 };
 
 #endif // MAINWINDOW_H

logPlus/mainwindowcurve.cpp

@@ -107,16 +107,15 @@ MainWindowCurve::MainWindowCurve(QWidget *parent) :
     ui->tableWidget_3->verticalHeader()->hide();
     ui->tableWidget_3->horizontalHeader()->hide();
 
-
     connect(this, SIGNAL(sig_NewTrackChangeWidth(QString, int)), this, SLOT(s_NewTrackChangeWidth(QString, int)));
     //connect(this, SIGNAL(sig_NewWell(QString, QString)), this, SLOT(s_NewWell(QString, QString)));
 
     connect(CallManage::getInstance(), SIGNAL(sig_mouseWheel(QWheelEvent*)), this, SLOT(s_mouseWheel(QWheelEvent*)));
     connect(CallManage::getInstance(), SIGNAL(sig_changeScale(int)), this, SLOT(s_changeScale(int)));
+    connect(CallManage::getInstance(), SIGNAL(sig_changeWidth(QString, QString, QString, QString, int, int)), this, SLOT(s_changeWidth(QString, QString, QString, QString, int, int)));
     //曲线选中，置顶
     connect(CallManage::getInstance(), SIGNAL(sig_Raise(QString, QString, QString, QString, QString, int)), this, SLOT(s_Raise(QString, QString, QString, QString, QString, int)));
 
-
     //图头
     m_dock1=new QDockWidget(tr(""),this);
     m_dock1->setFeatures(QDockWidget::NoDockWidgetFeatures);//QDockWidget::DockWidgetMovable
@@ -209,6 +208,7 @@ void MainWindowCurve::initMainToolBar()
     //ui->mainToolBar->addAction(m_openAc);
 
     connect(m_fixwellsectionHeaderAc, &QAction::triggered, this, &MainWindowCurve::s_showHeadTable);
+    connect(m_currtempliteAc, &QAction::triggered, this, &MainWindowCurve::s_currtemplite);
     connect(m_saveastemplateAc, &QAction::triggered, this, &MainWindowCurve::s_Save);
     connect(m_executeDepthShiftAc, &QAction::triggered, this, &MainWindowCurve::s_ExecuteDepthShift);
 
@@ -910,6 +910,11 @@ void MainWindowCurve::loadStyle(const QString &qssFile)
     }
 }
 
+void MainWindowCurve::s_currtemplite()
+{
+
+}
+
 void MainWindowCurve::s_Save()
 {
     //Logdata
@@ -976,15 +981,6 @@ void MainWindowCurve::s_ModuleOpen()
     pModuleConsole->m_pWorkflowDataModel = new CWellLogWorkflowDataModel();
     pDialog->m_CurrentSLFFileName = strSlfName;
     pDialog->CreatParamControlWidget();
-
-    QString subStr = strSlfName;
-    int startPos = strSlfName.indexOf("Logdata");
-    if (startPos>=0)
-    {
-        subStr = subStr.right(strSlfName.length() - startPos - 7);
-    }
-    pDialog->setWindowTitle(subStr);
-
     pDialog->show();
     return;
 }
@@ -2416,6 +2412,45 @@ void MainWindowCurve::Open(QString fileFull)
     }
 }
 
+//改变道宽
+void MainWindowCurve::s_changeWidth(QString strUuid, QString strSlfName, QString strWellName, QString strTrackName, int iCurrentCol, int iNewWidth)
+{
+    int columnCount = ui->tableWidget_2->columnCount();//总列数
+    for(int i=0; i<columnCount; i++)
+    {
+        if(i%2==0)
+        {
+        }
+        else
+        {
+            //空白列
+            continue;
+        }
+
+        if( ui->tableWidget_2->cellWidget(1, i) != nullptr )
+        {
+             auto myWidget = ui->tableWidget_2->cellWidget(1, i);
+             if(myWidget)
+             {
+                 //
+                 FormWell *widgetWell = (FormWell*)myWidget;//获得widget
+                 if(widgetWell)
+                 {
+                     if(widgetWell->m_strUuid==strUuid
+                        && widgetWell->m_strSlfName==strSlfName
+                        && widgetWell->m_strWellName==strWellName)
+                     {
+                        int iWellWidth = widgetWell->setColWidth(iCurrentCol, iNewWidth);
+
+                        //调整井宽
+                        ui->tableWidget_2->setColumnWidth(i, iWellWidth);
+                     }
+                 }
+             }
+        }
+    }
+}
+
 //改变缩放比例
 void MainWindowCurve::s_changeScale(int iNewScale)
 {

logPlus/mainwindowcurve.h

@@ -49,6 +49,9 @@ public slots:
     void slot_time();
     //改变缩放比例
     void s_changeScale(int iNewScale);
+    //改变道宽
+    void s_changeWidth(QString strUuid, QString strSlfName, QString strWellName, QString strTrackName, int iCurrentCol, int iNewWidth);
+
     void onItemClicked(QTableWidgetItem* item);
     void mousePressEvent(QMouseEvent *event);
     void s_Raise(QString strUuid, QString strSlfName, QString strWellName, QString strTrackName, QString strLineName, int iTableType);
@@ -167,6 +170,7 @@ public slots:
 
     //
     void s_showHeadTable();     //显示/隐藏图头
+    void s_currtemplite();      //加载图文件
     void s_Save();              //保存图文件
     void s_ExecuteDepthShift(); //校深
     void s_ModuleOpen();        //处理算法

logPlus/qmytablewidget.cpp

@@ -135,13 +135,25 @@ void QMyTableWidget::mouseReleaseEvent(QMouseEvent *event)
         }
         else {
             QTableWidgetItem *item = currentItem();
+            if(item)
+            {
                 QString strTrackName = item->text();
                 QString strUuid = item->data(Qt::UserRole+1).toString();
                 QString strWellName = item->data(Qt::UserRole+2).toString();
                 QString strSlfName = item->data(Qt::UserRole+3).toString();
                 //
+                int iCurrentCol = currentColumn();
+                int iWidth = columnWidth(iCurrentCol);
+
+                PropertyService()->initTrackProperty(item, iWidth, this, iCurrentCol);
+                //
                 emit CallManage::getInstance()->sig_Raise(strUuid, strSlfName, strWellName, strTrackName, "", 2);
             }
+            else {
+                qDebug()<<"QMyTableWidget mouseReleaseEvent, item=null";
+
+            }
+        }
     }
 }