diff --git a/logPlus/PropertyWidget.cpp b/logPlus/PropertyWidget.cpp
index 534b85a..466827e 100644
--- a/logPlus/PropertyWidget.cpp
+++ b/logPlus/PropertyWidget.cpp
@@ -536,7 +536,7 @@ void PropertyWidget::changedCorePhysicsProperty(QtProperty *qtProperty, const QV
             break;
         }
         this->m_formInfo->m_cp_scaleType = newStyle;
-        this->m_tdCorePhysics->setCpScaleType(newStyle);
+//        this->m_tdCorePhysics->setCpScaleType(newStyle);
 
     }
     else if("显示单位" == m_propertyData[qtProperty])
@@ -3449,6 +3449,14 @@ void PropertyWidget::initCorePhysicsItemProperty(TransparentDraggableCorePhysics
 {
     //初始化，清空
     InitCurrentViewInfo();
+//    qDebug() << "=========-----this:" << tdImage << " mPlot:" << tdImage->mPlot;
+//    QMyCustomPlot *mPlot = tdImage->mPlot;
+//    qDebug() << tdImage->mPlot->m_strUuid << "====";
+//    qDebug() << tdImage->mPlot->m_strWellName << "====";
+//    qDebug() << tdImage->mPlot->m_strTrackName << "====";
+//    qDebug() << tdImage->mPlot->m_strLineName << "====";
+//    qDebug() << tdImage->mPlot->m_formTrack << "====";
+
     FormInfo* formInfo = tdImage->mPlot->m_formTrack->getFormInfoByParameters(tdImage->mPlot->m_strUuid, tdImage->mPlot->m_strWellName,
                                                                     tdImage->mPlot->m_strTrackName, tdImage->mPlot->m_strLineName);
     if (formInfo != NULL)
diff --git a/logPlus/TransparentDraggableCorePhysics.cpp b/logPlus/TransparentDraggableCorePhysics.cpp
index db00957..92bceed 100644
--- a/logPlus/TransparentDraggableCorePhysics.cpp
+++ b/logPlus/TransparentDraggableCorePhysics.cpp
@@ -50,7 +50,7 @@ void TransparentDraggableCorePhysics::setRange(double left_Low, double right_Hig
     }
     m_lY1 = lY1;
     // lY2除以实际左到右刻度数值
-    lY2 = lY2 / (getCpRightScale() - getCpLeftScale()) * 100;
+//    lY2 = lY2 / (getCpRightScale() - getCpLeftScale()) * 100;
 
 
     qcpItemLine->start->setCoords(left_Low, lY1);//圆心位置
@@ -122,6 +122,7 @@ void TransparentDraggableCorePhysics::initRect()
     tracer->setVisible(false);
 
     qDebug() << "Creating qcpItemLine";
+//    qDebug() << "=========this:" << this << " mPlot:" << mPlot;
 }
 
 void TransparentDraggableCorePhysics::updateHandles()
@@ -306,35 +307,25 @@ void TransparentDraggableCorePhysics::setCpCoreValue(double value)
     qcpItemLine->end->setCoords(currentX, value);
 }
 
-double TransparentDraggableCorePhysics::getCpExampleAreaHeightCm() const
-{
-    return this->m_cp_exampleAreaHeightCm;
-}
+//double TransparentDraggableCorePhysics::getCpRotationAngle() const
+//{
+//    return this->m_cp_rotationAngle;
+//}
 
-void TransparentDraggableCorePhysics::setCpExampleAreaHeightCm(double value)
-{
-    this->m_cp_exampleAreaHeightCm = value;
-}
+//void TransparentDraggableCorePhysics::setCpRotationAngle(double value)
+//{
+//    this->m_cp_rotationAngle = value;
+//}
 
-double TransparentDraggableCorePhysics::getCpRotationAngle() const
-{
-    return this->m_cp_rotationAngle;
-}
+//QString TransparentDraggableCorePhysics::getCpDisplayName() const
+//{
+//    return this->m_cp_displayName;
+//}
 
-void TransparentDraggableCorePhysics::setCpRotationAngle(double value)
-{
-    this->m_cp_rotationAngle = value;
-}
-
-QString TransparentDraggableCorePhysics::getCpDisplayName() const
-{
-    return this->m_cp_displayName;
-}
-
-void TransparentDraggableCorePhysics::setCpDisplayName(const QString &value)
-{
-    this->m_cp_displayName = value;
-}
+//void TransparentDraggableCorePhysics::setCpDisplayName(const QString &value)
+//{
+//    this->m_cp_displayName = value;
+//}
 
 int TransparentDraggableCorePhysics::getCpLineWidth() const
 {
@@ -381,88 +372,88 @@ void TransparentDraggableCorePhysics::setCpLineStyle(Qt::PenStyle value)
 
 }
 
-double TransparentDraggableCorePhysics::getCpLeftScale() const
-{
-    return this->m_cp_leftScale;
-}
+//double TransparentDraggableCorePhysics::getCpLeftScale() const
+//{
+//    return this->m_cp_leftScale;
+//}
 
-void TransparentDraggableCorePhysics::setCpLeftScale(double value)
-{
-    this->m_cp_leftScale = value;
+//void TransparentDraggableCorePhysics::setCpLeftScale(double value)
+//{
+//    this->m_cp_leftScale = value;
 
-//    this->mPlot->yAxis2->setRange(value, this->mPlot->yAxis2->range().upper);
-//    // 重新绘制图形
-//    this->setRange(this->m_left_Low, this->m_left_Low, this->getCpCoreValue(), false);
-}
+////    this->mPlot->yAxis2->setRange(value, this->mPlot->yAxis2->range().upper);
+////    // 重新绘制图形
+////    this->setRange(this->m_left_Low, this->m_left_Low, this->getCpCoreValue(), false);
+//}
 
-double TransparentDraggableCorePhysics::getCpRightScale() const
-{
-    return this->m_cp_rightScale;
-}
+//double TransparentDraggableCorePhysics::getCpRightScale() const
+//{
+//    return this->m_cp_rightScale;
+//}
 
-void TransparentDraggableCorePhysics::setCpRightScale(double value)
-{
-    this->m_cp_rightScale = value;
+//void TransparentDraggableCorePhysics::setCpRightScale(double value)
+//{
+//    this->m_cp_rightScale = value;
 
-//    this->mPlot->yAxis2->setRange(this->mPlot->yAxis2->range().lower, value);
-//    // 重新绘制图形
-//    this->setRange(this->m_left_Low, this->m_left_Low, this->getCpCoreValue(), false);
-}
+////    this->mPlot->yAxis2->setRange(this->mPlot->yAxis2->range().lower, value);
+////    // 重新绘制图形
+////    this->setRange(this->m_left_Low, this->m_left_Low, this->getCpCoreValue(), false);
+//}
 
-int TransparentDraggableCorePhysics::getCpScaleType() const
-{
-    return this->m_cp_scaleType;
-}
+//int TransparentDraggableCorePhysics::getCpScaleType() const
+//{
+//    return this->m_cp_scaleType;
+//}
 
-void TransparentDraggableCorePhysics::setCpScaleType(int value)
-{
-    this->m_cp_scaleType = value;
+//void TransparentDraggableCorePhysics::setCpScaleType(int value)
+//{
+//    this->m_cp_scaleType = value;
 
-//    int newStyle = 0;
-//    switch(value)
-//    {
-//    case 0:
-//        // 线性
-//        this->mPlot->yAxis2->setScaleType(QCPAxis::stLinear);
-//        break;
-//    case 1:
-//        // 对数
-//        this->mPlot->yAxis2->setScaleType(QCPAxis::stLogarithmic);
-//        break;
-//    case 2:
-//        // 倾角 没有倾角类型
-//        this->mPlot->yAxis2->setScaleType(QCPAxis::stLogarithmic);
-//        break;
-//    }
-}
+////    int newStyle = 0;
+////    switch(value)
+////    {
+////    case 0:
+////        // 线性
+////        this->mPlot->yAxis2->setScaleType(QCPAxis::stLinear);
+////        break;
+////    case 1:
+////        // 对数
+////        this->mPlot->yAxis2->setScaleType(QCPAxis::stLogarithmic);
+////        break;
+////    case 2:
+////        // 倾角 没有倾角类型
+////        this->mPlot->yAxis2->setScaleType(QCPAxis::stLogarithmic);
+////        break;
+////    }
+//}
 
-int TransparentDraggableCorePhysics::getCpScaleDivisionsOrCustom() const
-{
-    return this->m_cp_scaleDivisionsOrCustom;
-}
+//int TransparentDraggableCorePhysics::getCpScaleDivisionsOrCustom() const
+//{
+//    return this->m_cp_scaleDivisionsOrCustom;
+//}
 
-void TransparentDraggableCorePhysics::setCpScaleDivisionsOrCustom(int value)
-{
-    this->m_cp_scaleDivisionsOrCustom = value;
+//void TransparentDraggableCorePhysics::setCpScaleDivisionsOrCustom(int value)
+//{
+//    this->m_cp_scaleDivisionsOrCustom = value;
 
-//    // 创建文本刻度 Ticker
-//    QSharedPointer<QCPAxisTickerText> textTicker(new QCPAxisTickerText);
-//    double minVal = this->mPlot->yAxis2->range().lower;
-//    double maxVal = this->mPlot->yAxis2->range().upper;
-//    // 计算步长：(最大值 - 最小值) / 等分数
-//    double step = (maxVal - minVal) / value;
-//    // 生成刻度
-//    for (int i = 0; i <= value; ++i) {
-//        double value = minVal + step * i;
-//        // 取整显示（34.0 显示为 "34"）
-//        QString label = QString::number(qRound(value));
-//        textTicker->addTick(value, label);
-//    }
-//    // 应用 Ticker
-//    this->mPlot->yAxis2->setTicker(textTicker);
-//    // 设置范围（稍微留边距，让刻度显示完整）
-////    this->mPlot->yAxis2->setRange(minVal - step * 0.1, maxVal + step * 0.1);
-}
+////    // 创建文本刻度 Ticker
+////    QSharedPointer<QCPAxisTickerText> textTicker(new QCPAxisTickerText);
+////    double minVal = this->mPlot->yAxis2->range().lower;
+////    double maxVal = this->mPlot->yAxis2->range().upper;
+////    // 计算步长：(最大值 - 最小值) / 等分数
+////    double step = (maxVal - minVal) / value;
+////    // 生成刻度
+////    for (int i = 0; i <= value; ++i) {
+////        double value = minVal + step * i;
+////        // 取整显示（34.0 显示为 "34"）
+////        QString label = QString::number(qRound(value));
+////        textTicker->addTick(value, label);
+////    }
+////    // 应用 Ticker
+////    this->mPlot->yAxis2->setTicker(textTicker);
+////    // 设置范围（稍微留边距，让刻度显示完整）
+//////    this->mPlot->yAxis2->setRange(minVal - step * 0.1, maxVal + step * 0.1);
+//}
 
 QString TransparentDraggableCorePhysics::getCpDisplayUnit() const
 {
diff --git a/logPlus/TransparentDraggableCorePhysics.h b/logPlus/TransparentDraggableCorePhysics.h
index 294e5fa..9f212e5 100644
--- a/logPlus/TransparentDraggableCorePhysics.h
+++ b/logPlus/TransparentDraggableCorePhysics.h
@@ -48,14 +48,11 @@ public:
     double getCpCoreValue() const;
     void setCpCoreValue(double value);
 
-    double getCpExampleAreaHeightCm() const;
-    void setCpExampleAreaHeightCm(double value);
+//    double getCpRotationAngle() const;
+//    void setCpRotationAngle(double value);
 
-    double getCpRotationAngle() const;
-    void setCpRotationAngle(double value);
-
-    QString getCpDisplayName() const;
-    void setCpDisplayName(const QString &value);
+//    QString getCpDisplayName() const;
+//    void setCpDisplayName(const QString &value);
 
     int getCpLineWidth() const;
     void setCpLineWidth(int value);
@@ -66,17 +63,17 @@ public:
     Qt::PenStyle getCpLineStyle() const;
     void setCpLineStyle(Qt::PenStyle value);
 
-    double getCpLeftScale() const;
-    void setCpLeftScale(double value);
+//    double getCpLeftScale() const;
+//    void setCpLeftScale(double value);
 
-    double getCpRightScale() const;
-    void setCpRightScale(double value);
+//    double getCpRightScale() const;
+//    void setCpRightScale(double value);
 
-    int getCpScaleType() const;
-    void setCpScaleType(int value);
+//    int getCpScaleType() const;
+//    void setCpScaleType(int value);
 
-    int getCpScaleDivisionsOrCustom() const;
-    void setCpScaleDivisionsOrCustom(int value);
+//    int getCpScaleDivisionsOrCustom() const;
+//    void setCpScaleDivisionsOrCustom(int value);
 
     QString getCpDisplayUnit() const;
     void setCpDisplayUnit(const QString &value);
@@ -124,16 +121,15 @@ signals:
     void rangeChanged(QCPRange newRange);
 
 private:
-    double m_cp_exampleAreaHeightCm; // 例区高度(cm)
-    double m_cp_rotationAngle; // 旋转角度
-    QString m_cp_displayName; // 显示名称
+//    double m_cp_rotationAngle; // 旋转角度
+//    QString m_cp_displayName; // 显示名称
     int m_cp_lineWidth; // 线宽
     QColor m_cp_lineColor; // 线条颜色
     Qt::PenStyle m_cp_lineStyle; // 线型
-    double m_cp_leftScale = 0; // 左刻度
-    double m_cp_rightScale = 100; // 右刻度
-    int m_cp_scaleType; // 刻度类型
-    int m_cp_scaleDivisionsOrCustom; // 等分刻度数或自定序列
+//    double m_cp_leftScale = 0; // 左刻度
+//    double m_cp_rightScale = 100; // 右刻度
+//    int m_cp_scaleType; // 刻度类型
+//    int m_cp_scaleDivisionsOrCustom; // 等分刻度数或自定序列
     QString m_cp_displayUnit; // 显示单位
     QString m_cp_curveName; // 曲线名称
     QString m_cp_curveUnit; // 曲线单位
diff --git a/logPlus/qmycustomplot.cpp b/logPlus/qmycustomplot.cpp
index f69bac9..08422fe 100644
--- a/logPlus/qmycustomplot.cpp
+++ b/logPlus/qmycustomplot.cpp
@@ -1930,6 +1930,10 @@ void QMyCustomPlot::addCorePhysics()
 
 void QMyCustomPlot::addCorePhysicsWithParam(int Order, double Depth, double CorrDepth, double CoreValue)
 {
+//    qDebug() << Order << "=====";
+//    qDebug() << Depth << "=====";
+//    qDebug() << CorrDepth << "=====";
+//    qDebug() << CoreValue << "=====";
     QtCommonClass *qtCommon = new QtCommonClass(this);
     QString strUuid =  qtCommon->getUUid();
     TransparentDraggableCorePhysics *dragRect = new TransparentDraggableCorePhysics(this, strUuid);