1.道中间的线，双线改为单线。 2.套管组件、沉积相、气测支持拖拽到其他道。 3.重新提交PropertyWidget.cpp

logPlus/PropertyWidget.cpp

@@ -941,11 +941,25 @@ void PropertyWidget::SlotPropertyChanged( QtProperty *pProperty, const QVariant
         else if("岩性" == m_propertyData[pProperty])
         {
             QString newResult = variant.value<QString>();
+
+            //只能选择自己的符号，不能选择其他。
+            QString strDefaultPath = ::GetLithSymbolDir();
+            //符号统一
+            strDefaultPath.replace("\\","/");
+            newResult.replace("\\","/");
+            //
+            if(newResult.contains(strDefaultPath))
+            {
                 m_tdLayer->setLith(newResult);
                 //
                 QCPRange currentRange = m_tdLayer->getRange();
                 m_tdLayer->setRange(currentRange.lower, currentRange.upper);
             }
+            else {
+                QMessageBox::information(nullptr,"提示","所选目录不支持");
+                return;
+            }
+        }
     }
 	else if (m_strCurrentProperty == JieshiItem_Property)
 	{
@@ -1021,6 +1035,15 @@ void PropertyWidget::SlotPropertyChanged( QtProperty *pProperty, const QVariant
             if(m_tdGujing)
             {
                 QString newResult = variant.value<QString>();
+
+                //只能选择自己的符号，不能选择其他。
+                QString strDefaultPath = ::GetGujingSymbolDir();
+                //符号统一
+                strDefaultPath.replace("\\","/");
+                newResult.replace("\\","/");
+                //
+                if(newResult.contains(strDefaultPath))
+                {
                     m_tdGujing->setResult(newResult);
                     //
                     QCPRange currentRange = m_tdGujing->getRange();
@@ -1028,6 +1051,11 @@ void PropertyWidget::SlotPropertyChanged( QtProperty *pProperty, const QVariant
                     //保存
                     m_tdGujing->mPlot->SaveToSLF_Gujing();
                 }
+                else {
+                    QMessageBox::information(nullptr,"提示","所选目录不支持");
+                    return;
+                }
+            }
         }
     }
     else if (m_strCurrentProperty == ImageItem_Property) // 岩心图片
@@ -1076,6 +1104,15 @@ void PropertyWidget::SlotPropertyChanged( QtProperty *pProperty, const QVariant
             if(m_tdSwallCore)
             {
                 QString newResult = variant.value<QString>();
+
+                //只能选择自己的符号，不能选择其他。
+                QString strDefaultPath = ::GetSymbolDir()+"取心岩性符号";
+                //符号统一
+                strDefaultPath.replace("\\","/");
+                newResult.replace("\\","/");
+                //
+                if(newResult.contains(strDefaultPath))
+                {
                     m_tdSwallCore->setLith(newResult);
                     //
                     QCPRange currentRange = m_tdSwallCore->getRange();
@@ -1083,6 +1120,11 @@ void PropertyWidget::SlotPropertyChanged( QtProperty *pProperty, const QVariant
                     //保存
                     m_tdSwallCore->mPlot->SaveToSLF_SwallCore();
                 }
+                else {
+                    QMessageBox::information(nullptr,"提示","所选目录不支持");
+                    return;
+                }
+            }
         }
         else if("油气" == m_propertyData[pProperty])
         {
@@ -1090,6 +1132,15 @@ void PropertyWidget::SlotPropertyChanged( QtProperty *pProperty, const QVariant
             if(m_tdSwallCore)
             {
                 QString newResult = variant.value<QString>();
+
+                //只能选择自己的符号，不能选择其他。
+                QString strDefaultPath = ::GetGasSymbolDir();
+                //符号统一
+                strDefaultPath.replace("\\","/");
+                newResult.replace("\\","/");
+                //
+                if(newResult.contains(strDefaultPath))
+                {
                     m_tdSwallCore->setOil(newResult);
                     //
                     QCPRange currentRange = m_tdSwallCore->getRange();
@@ -1097,6 +1148,11 @@ void PropertyWidget::SlotPropertyChanged( QtProperty *pProperty, const QVariant
                     //保存
                     m_tdSwallCore->mPlot->SaveToSLF_SwallCore();
                 }
+                else {
+                    QMessageBox::information(nullptr,"提示","所选目录不支持");
+                    return;
+                }
+            }
         }
         else if("颜色" == m_propertyData[pProperty])
         {
@@ -1105,6 +1161,14 @@ void PropertyWidget::SlotPropertyChanged( QtProperty *pProperty, const QVariant
             {
                 QString ColorImage = variant.value<QString>();
 
+                //只能选择自己的符号，不能选择其他。
+                QString strDefaultPath = ::GetColorSymbolDir();
+                //符号统一
+                strDefaultPath.replace("\\","/");
+                ColorImage.replace("\\","/");
+                //
+                if(ColorImage.contains(strDefaultPath))
+                {
                     QString name = "";
                     int CoreColor = 0;
                     ColorImage.replace("\\","/");
@@ -1124,6 +1188,11 @@ void PropertyWidget::SlotPropertyChanged( QtProperty *pProperty, const QVariant
                     //保存
                     m_tdSwallCore->mPlot->SaveToSLF_SwallCore();
                 }
+                else {
+                    QMessageBox::information(nullptr,"提示","所选目录不支持");
+                    return;
+                }
+            }
         }
         else if("起始位置" == m_propertyData[pProperty])
         {
@@ -1174,6 +1243,15 @@ void PropertyWidget::SlotPropertyChanged( QtProperty *pProperty, const QVariant
             if(m_tdGeoLith)
             {
                 QString newResult = variant.value<QString>();
+
+                //只能选择自己的符号，不能选择其他。
+                QString strDefaultPath = ::GetMudSymbolDir();
+                //符号统一
+                strDefaultPath.replace("\\","/");
+                newResult.replace("\\","/");
+                //
+                if(newResult.contains(strDefaultPath))
+                {
                     m_tdGeoLith->setLith(newResult, m_tdGeoLith->m_Color);
                     //
                     QCPRange currentRange = m_tdGeoLith->getRange();
@@ -1181,6 +1259,11 @@ void PropertyWidget::SlotPropertyChanged( QtProperty *pProperty, const QVariant
                     //保存
                     m_tdGeoLith->mPlot->SaveToSLF_GeoLith();
                 }
+                else {
+                    QMessageBox::information(nullptr,"提示","所选目录不支持");
+                    return;
+                }
+            }
         }
         else if("油气" == m_propertyData[pProperty])
         {
@@ -1188,6 +1271,15 @@ void PropertyWidget::SlotPropertyChanged( QtProperty *pProperty, const QVariant
             if(m_tdGeoLith)
             {
                 QString newResult = variant.value<QString>();
+
+                //只能选择自己的符号，不能选择其他。
+                QString strDefaultPath = ::GetGasSymbolDir();
+                //符号统一
+                strDefaultPath.replace("\\","/");
+                newResult.replace("\\","/");
+                //
+                if(newResult.contains(strDefaultPath))
+                {
                     m_tdGeoLith->setOil(newResult);
                     //
                     QCPRange currentRange = m_tdGeoLith->getRange();
@@ -1195,6 +1287,11 @@ void PropertyWidget::SlotPropertyChanged( QtProperty *pProperty, const QVariant
                     //保存
                     m_tdGeoLith->mPlot->SaveToSLF_GeoLith();
                 }
+                else {
+                    QMessageBox::information(nullptr,"提示","所选目录不支持");
+                    return;
+                }
+            }
         }
         else if("颜色" == m_propertyData[pProperty])
         {
@@ -1202,6 +1299,15 @@ void PropertyWidget::SlotPropertyChanged( QtProperty *pProperty, const QVariant
             if(m_tdGeoLith)
             {
                 QString newResult = variant.value<QString>();
+
+                //只能选择自己的符号，不能选择其他。
+                QString strDefaultPath = ::GetColorSymbolDir();
+                //符号统一
+                strDefaultPath.replace("\\","/");
+                newResult.replace("\\","/");
+                //
+                if(newResult.contains(strDefaultPath))
+                {
                     m_tdGeoLith->setLith(m_tdGeoLith->m_Lith, newResult);
                     //
                     QCPRange currentRange = m_tdGeoLith->getRange();
@@ -1209,6 +1315,11 @@ void PropertyWidget::SlotPropertyChanged( QtProperty *pProperty, const QVariant
                     //保存
                     m_tdGeoLith->mPlot->SaveToSLF_GeoLith();
                 }
+                else {
+                    QMessageBox::information(nullptr,"提示","所选目录不支持");
+                    return;
+                }
+            }
         }
         else if("含油占比(1~8)" == m_propertyData[pProperty])
         {
@@ -1675,6 +1786,15 @@ void PropertyWidget::SlotPropertyChanged( QtProperty *pProperty, const QVariant
 
                 //--------------------------
                 QString newResult = variant.value<QString>();
+
+                //只能选择自己的符号，不能选择其他。
+                QString strDefaultPath = GetSymbolDir()+"管柱组件";
+                //符号统一
+                strDefaultPath.replace("\\","/");
+                newResult.replace("\\","/");
+                //
+                if(newResult.contains(strDefaultPath))
+                {
                     m_tdGuan->setResult(newResult);
                     //
                     QCPRange currentRange = m_tdGuan->getRange();
@@ -1690,6 +1810,11 @@ void PropertyWidget::SlotPropertyChanged( QtProperty *pProperty, const QVariant
                         m_tdGuan->mPlot->LoadFromSLF_ReDrawTubing(m_tdGuan->mPlot->m_strSlfName, m_tdGuan->mPlot->m_strLineName);
                     }
                 }
+                else {
+                    QMessageBox::information(nullptr,"提示","所选目录不支持");
+                    return;
+                }
+            }
         }
     }
 	else if (m_strCurrentProperty == Depth_Property) // 深度
@@ -3125,9 +3250,51 @@ void PropertyWidget::initSwallCoreItemProperty(TransparentDraggableSwallCore* td
 
     //
     _CreateVariantPropertyItem("当前项", "深度", -Depth, QVariant::Double);
+
+    //只能选择自己的符号，不能选择其他。
+    QString strDefaultPath = ::GetSymbolDir()+"取心岩性符号";
+    //符号统一
+    strDefaultPath.replace("\\","/");
+    LithologyImage.replace("\\","/");
+    //
+    if(LithologyImage.contains(strDefaultPath))
+    {
         _CreateVariantPropertyItem("当前项", "岩性", LithologyImage, VariantManager::filePathTypeId());
+    }
+    else{
+        _CreateVariantPropertyItem("当前项", "岩性", strDefaultPath, VariantManager::filePathTypeId());
+    }
+
+    //只能选择自己的符号，不能选择其他。
+    strDefaultPath = ::GetGasSymbolDir();
+    //符号统一
+    strDefaultPath.replace("\\","/");
+    OilGasImage.replace("\\","/");
+    //
+    if(OilGasImage.contains(strDefaultPath))
+    {
         _CreateVariantPropertyItem("当前项", "油气", OilGasImage, VariantManager::filePathTypeId());
+    }
+    else
+    {
+        _CreateVariantPropertyItem("当前项", "油气", strDefaultPath, VariantManager::filePathTypeId());
+    }
+
+    //只能选择自己的符号，不能选择其他。
+    strDefaultPath = ::GetColorSymbolDir();
+    //符号统一
+    strDefaultPath.replace("\\","/");
+    ColorImage.replace("\\","/");
+    //
+    if(ColorImage.contains(strDefaultPath))
+    {
         _CreateVariantPropertyItem("当前项", "颜色", ColorImage, VariantManager::filePathTypeId());
+    }
+    else
+    {
+        _CreateVariantPropertyItem("当前项", "颜色", strDefaultPath, VariantManager::filePathTypeId());
+    }
+
     _CreateVariantPropertyItem("当前项", "起始位置", Sideleft, QVariant::Double);
     //_CreateVariantPropertyItem("当前项", "宽度", -Depth, QVariant::Double);
 }
@@ -3294,8 +3461,22 @@ void PropertyWidget::initGujingItemProperty(TransparentDraggableGujing* tdGujing
     //
     _CreateVariantPropertyItem("当前项", "顶深(m)", -upper, QVariant::Double);
     _CreateVariantPropertyItem("当前项", "底深(m)", -lower, QVariant::Double);
+
+    //只能选择自己的符号，不能选择其他。
+    QString strDefaultPath = ::GetGujingSymbolDir();
+    //符号统一
+    strDefaultPath.replace("\\","/");
+    strResult.replace("\\","/");
+    //
+    if(strResult.contains(strDefaultPath))
+    {
         _CreateVariantPropertyItem("当前项", "固井结论", strResult, VariantManager::filePathTypeId());
     }
+    else
+    {
+        _CreateVariantPropertyItem("当前项", "固井结论", strDefaultPath, VariantManager::filePathTypeId());
+    }
+}
 
 void PropertyWidget::initImageProperty(FormInfo *formInfo)
 {
@@ -3612,7 +3793,7 @@ void PropertyWidget::initTvdProperty(FormInfo *formInfo)
     m_strCurrentProperty = Tvd_Property;
 }
 
-void PropertyWidget::initGeoLithItemProperty(TransparentDraggableGeoLith* tdGeoLith, double lower, double upper, const QString myLith, const QString myOil, const QString myColor)
+void PropertyWidget::initGeoLithItemProperty(TransparentDraggableGeoLith* tdGeoLith, double lower, double upper, QString myLith, QString myOil, QString myColor)
 {
     //初始化，清空
     InitCurrentViewInfo();
@@ -3654,10 +3835,52 @@ void PropertyWidget::initGeoLithItemProperty(TransparentDraggableGeoLith* tdGeoL
     //
     _CreateVariantPropertyItem("当前项", "顶深(m)", -upper, QVariant::Double);
     _CreateVariantPropertyItem("当前项", "底深(m)", -lower, QVariant::Double);
+
+    //只能选择自己的符号，不能选择其他。
+    QString strDefaultPath = ::GetMudSymbolDir();
+    //符号统一
+    strDefaultPath.replace("\\","/");
+    myLith.replace("\\","/");
+    //
+    if(myLith.contains(strDefaultPath))
+    {
         _CreateVariantPropertyItem("当前项", "岩性", myLith, VariantManager::filePathTypeId());
+    }
+    else{
+        _CreateVariantPropertyItem("当前项", "岩性", strDefaultPath, VariantManager::filePathTypeId());
+    }
+
+    //只能选择自己的符号，不能选择其他。
+    strDefaultPath = ::GetGasSymbolDir();
+    //符号统一
+    strDefaultPath.replace("\\","/");
+    myOil.replace("\\","/");
+    //
+    if(myOil.contains(strDefaultPath))
+    {
         _CreateVariantPropertyItem("当前项", "油气", myOil, VariantManager::filePathTypeId());
+    }
+    else
+    {
+        _CreateVariantPropertyItem("当前项", "油气", strDefaultPath, VariantManager::filePathTypeId());
+    }
+
+    //只能选择自己的符号，不能选择其他。
+    strDefaultPath = ::GetColorSymbolDir();
+    //符号统一
+    strDefaultPath.replace("\\","/");
+    myColor.replace("\\","/");
+    //
+    if(myColor.contains(strDefaultPath))
+    {
         _CreateVariantPropertyItem("当前项", "颜色", myColor, VariantManager::filePathTypeId());
     }
+    else
+    {
+        _CreateVariantPropertyItem("当前项", "颜色", strDefaultPath, VariantManager::filePathTypeId());
+    }
+
+}
 
 //气测/FMT/射孔/文本
 void PropertyWidget::initJiegutextProperty(FormInfo *formInfo)
@@ -3815,8 +4038,21 @@ void PropertyWidget::initTubingItemProperty(TransparentDraggableGuan* tdGuan, do
 
     //
     _CreateVariantPropertyItem("当前项", "深度(m)", -(upper+lower)/2.0, QVariant::Double);
+
+    //只能选择自己的符号，不能选择其他。
+    QString strDefaultPath = GetSymbolDir()+"管柱组件";
+    //符号统一
+    strDefaultPath.replace("\\","/");
+    strResult.replace("\\","/");
+    //
+    if(strResult.contains(strDefaultPath))
+    {
         _CreateVariantPropertyItem("当前项", "组件类型", strResult, VariantManager::filePathTypeId());
     }
+    else {
+        _CreateVariantPropertyItem("当前项", "组件类型", strDefaultPath, VariantManager::filePathTypeId());
+    }
+}
 
 void PropertyWidget::changedDepthProperty(QString strProperty, QVariant varVal)
 {

logPlus/customtabwidget.cpp

@@ -189,6 +189,16 @@ void CustomTabWidget::dropEvent(QDropEvent *event)
 //关闭
 void CustomTabWidget::slot_tabClose(int index)
 {
+    QWidget *selectWidget =  tabWidget(index);
+
+    QString objectName = selectWidget->objectName();
+    if(objectName == "MainWindowSplitter")
+    {
+        int flag = QMessageBox::warning(NULL,"提示",QString("图文件尚未保存,您确信关闭当前窗口？"),QMessageBox::Yes,QMessageBox::No);
+        if(flag!=QMessageBox::Yes) return;
+    }
+
+    //移除
     removeTab(index);
 
     //属性清空

logPlus/formdraw.cpp

@@ -8154,6 +8154,63 @@ void FormDraw::dropEvent(QDropEvent* event)
                     //新建表格曲线
                     emit CallManage::getInstance()->sig_AddTableLine(m_strUuid, strSlfName, strWellName, m_strTrackName, strLineName);
                 }
+                else if(strType=="depthObject")
+                {
+                    qDebug() << "新建深度";
+                    //新建曲线
+                    emit CallManage::getInstance()->sig_AddDepth(m_strUuid, strSlfName, strWellName, m_strTrackName, strLineName);
+                }
+                else if(strType=="ganzhuangtuObject")
+                {
+                    //新建杆状图
+                    emit CallManage::getInstance()->sig_AddGanZhuangTu(m_strUuid, strSlfName, strWellName, m_strTrackName, strLineName);
+                }
+                else if(strType=="JyktObject")
+                {
+                    //新建井眼垮塌矢量图
+                    emit CallManage::getInstance()->sig_AddJykt(m_strUuid, strSlfName, strWellName, m_strTrackName, strLineName);
+                }
+                else if(strType=="DenvObject")
+                {
+                    //新建井斜方位图
+                    emit CallManage::getInstance()->sig_AddDenv(m_strUuid, strSlfName, strWellName, m_strTrackName, strLineName);
+                }
+                else if(strType=="DrawImageObject")
+                {
+                    //图像 成图
+                    emit CallManage::getInstance()->sig_AddDrawImage(m_strUuid, strSlfName, strWellName, m_strTrackName, strLineName);
+                }
+                else if(strType=="SantuyibiaoObject")
+                {
+                    //斜井三图一表
+                    emit CallManage::getInstance()->sig_AddSantuyibiao(m_strUuid, strSlfName, strWellName, m_strTrackName, strLineName);
+                }
+                else if(strType=="CrackObject")
+                {
+                    //裂缝
+                    emit CallManage::getInstance()->sig_AddCrack(m_strUuid, strSlfName, strWellName, m_strTrackName, strLineName);
+                }
+                else if(strType=="JiegutextObject")
+                {
+                    //气测/FMT/射孔/文本
+                    emit CallManage::getInstance()->sig_AddJiegutext(m_strUuid, strSlfName, strWellName, m_strTrackName, strLineName);
+                }
+                else if(strType=="LogfaceObject")
+                {
+                    //沉积相
+                    emit CallManage::getInstance()->sig_AddLogface(m_strUuid, strSlfName, strWellName, m_strTrackName, strLineName);
+                }
+                else if(strType=="MCalsObject")
+                {
+                    //多臂井径
+                    emit CallManage::getInstance()->sig_AddMCals(m_strUuid, strSlfName, strWellName, m_strTrackName, strLineName);
+                }
+                else if(strType=="TubingstringObject")
+                {
+                    //套管组件
+                    emit CallManage::getInstance()->sig_AddTubingstring(m_strUuid, strSlfName, strWellName, m_strTrackName, strLineName);
+                }
+
                 // 接受拖拽事件
                 event->setDropAction(Qt::MoveAction);
                 event->accept();

logPlus/formtracktop.cpp

@@ -137,6 +137,62 @@ void FormTrackTop::dropEvent(QDropEvent* event)
                     //新建表格曲线
                     emit CallManage::getInstance()->sig_AddTableLine(m_strUuid, strSlfName, strWellName, m_strTrackName, strLineName);
                 }
+                else if(strType=="depthObject")
+                {
+                    qDebug() << "新建深度";
+                    //新建曲线
+                    emit CallManage::getInstance()->sig_AddDepth(m_strUuid, strSlfName, strWellName, m_strTrackName, strLineName);
+                }
+                else if(strType=="ganzhuangtuObject")
+                {
+                    //新建杆状图
+                    emit CallManage::getInstance()->sig_AddGanZhuangTu(m_strUuid, strSlfName, strWellName, m_strTrackName, strLineName);
+                }
+                else if(strType=="JyktObject")
+                {
+                    //新建井眼垮塌矢量图
+                    emit CallManage::getInstance()->sig_AddJykt(m_strUuid, strSlfName, strWellName, m_strTrackName, strLineName);
+                }
+                else if(strType=="DenvObject")
+                {
+                    //新建井斜方位图
+                    emit CallManage::getInstance()->sig_AddDenv(m_strUuid, strSlfName, strWellName, m_strTrackName, strLineName);
+                }
+                else if(strType=="DrawImageObject")
+                {
+                    //图像 成图
+                    emit CallManage::getInstance()->sig_AddDrawImage(m_strUuid, strSlfName, strWellName, m_strTrackName, strLineName);
+                }
+                else if(strType=="SantuyibiaoObject")
+                {
+                    //斜井三图一表
+                    emit CallManage::getInstance()->sig_AddSantuyibiao(m_strUuid, strSlfName, strWellName, m_strTrackName, strLineName);
+                }
+                else if(strType=="CrackObject")
+                {
+                    //裂缝
+                    emit CallManage::getInstance()->sig_AddCrack(m_strUuid, strSlfName, strWellName, m_strTrackName, strLineName);
+                }
+                else if(strType=="JiegutextObject")
+                {
+                    //气测/FMT/射孔/文本
+                    emit CallManage::getInstance()->sig_AddJiegutext(m_strUuid, strSlfName, strWellName, m_strTrackName, strLineName);
+                }
+                else if(strType=="LogfaceObject")
+                {
+                    //沉积相
+                    emit CallManage::getInstance()->sig_AddLogface(m_strUuid, strSlfName, strWellName, m_strTrackName, strLineName);
+                }
+                else if(strType=="MCalsObject")
+                {
+                    //多臂井径
+                    emit CallManage::getInstance()->sig_AddMCals(m_strUuid, strSlfName, strWellName, m_strTrackName, strLineName);
+                }
+                else if(strType=="TubingstringObject")
+                {
+                    //套管组件
+                    emit CallManage::getInstance()->sig_AddTubingstring(m_strUuid, strSlfName, strWellName, m_strTrackName, strLineName);
+                }
                 // 接受拖拽事件
                 event->setDropAction(Qt::MoveAction);
                 event->accept();

logPlus/formwell.cpp

@@ -28,8 +28,12 @@ FormWell::FormWell(QWidget *parent, QString strWellName) :
     ui->tableWidget->setRowCount(rowcount); //动态设置行数
     //ui->tableWidget->verticalHeader()->setFixedWidth(3);//标题栏宽度
     ui->tableWidget->horizontalHeader()->setFixedHeight(3);
-
+    //左右边框隐藏
-    ui->tableWidget->setStyleSheet( "QTableView::item:selected {color:#57595B; background:#E4E4E4;}");
+    ui->tableWidget->setStyleSheet("QTableView::item {border-left: 0px solid black;} \
+                                    QTableView::item:selected {border-left: 0px solid black; color:#57595B; background:#E4E4E4;}\
+                                    QTableView::item {border-right: 0px solid black;} \
+                                    QTableView::item:selected {border-right: 0px solid black;}");
+    //"QTableView::item:selected {color:#57595B; background:#E4E4E4;}"
 
 	// 假设你的类中有一个槽函数：onTableRowsInserted(QModelIndex parent, int first, int last)
 	//connect(ui->tableWidget->model(), &QAbstractItemModel::columnsInserted,

logPlus/preqtablewidget.cpp

@@ -125,7 +125,71 @@ void PreQTableWidget::dropEvent(QDropEvent *event)
                     //新建表格曲线
                     emit CallManage::getInstance()->sig_AddTableLine(m_strUuid, strSlfName, strWellName, m_strTrackName, strLineName);
                 }
+                else if(strType=="depthObject")
+                {
+                    qDebug() << "新建深度";
+                    //新建曲线
+                    emit CallManage::getInstance()->sig_AddDepth(m_strUuid, strSlfName, strWellName, m_strTrackName, strLineName);
+                }
+                else if(strType=="ganzhuangtuObject")
+                {
+                    //新建杆状图
+                    emit CallManage::getInstance()->sig_AddGanZhuangTu(m_strUuid, strSlfName, strWellName, m_strTrackName, strLineName);
+                }
+                else if(strType=="JyktObject")
+                {
+                    //新建井眼垮塌矢量图
+                    emit CallManage::getInstance()->sig_AddJykt(m_strUuid, strSlfName, strWellName, m_strTrackName, strLineName);
+                }
+                else if(strType=="DenvObject")
+                {
+                    //新建井斜方位图
+                    emit CallManage::getInstance()->sig_AddDenv(m_strUuid, strSlfName, strWellName, m_strTrackName, strLineName);
+                }
+                else if(strType=="DrawImageObject")
+                {
+                    //图像 成图
+                    emit CallManage::getInstance()->sig_AddDrawImage(m_strUuid, strSlfName, strWellName, m_strTrackName, strLineName);
+                }
+                else if(strType=="SantuyibiaoObject")
+                {
+                    //斜井三图一表
+                    emit CallManage::getInstance()->sig_AddSantuyibiao(m_strUuid, strSlfName, strWellName, m_strTrackName, strLineName);
+                }
+                else if(strType=="CrackObject")
+                {
+                    //裂缝
+                    emit CallManage::getInstance()->sig_AddCrack(m_strUuid, strSlfName, strWellName, m_strTrackName, strLineName);
+                }
+                else if(strType=="JiegutextObject")
+                {
+                    //删除表格
+//                    emit CallManage::getInstance()->sig_delTableLine(m_strUuid, strWellName, strTrackName, strLineName);
 
+                    //气测/FMT/射孔/文本
+                    emit CallManage::getInstance()->sig_AddJiegutext(m_strUuid, strSlfName, strWellName, m_strTrackName, strLineName);
+                }
+                else if(strType=="LogfaceObject")
+                {
+                    //删除表格
+//                    emit CallManage::getInstance()->sig_delTableLine(m_strUuid, strWellName, strTrackName, strLineName);
+
+                    //沉积相
+                    emit CallManage::getInstance()->sig_AddLogface(m_strUuid, strSlfName, strWellName, m_strTrackName, strLineName);
+                }
+                else if(strType=="MCalsObject")
+                {
+                    //多臂井径
+                    emit CallManage::getInstance()->sig_AddMCals(m_strUuid, strSlfName, strWellName, m_strTrackName, strLineName);
+                }
+                else if(strType=="TubingstringObject")
+                {
+                    //删除表格
+//                    emit CallManage::getInstance()->sig_delTableLine(m_strUuid, strWellName, strTrackName, strLineName);
+
+                    //套管组件
+                    emit CallManage::getInstance()->sig_AddTubingstring(m_strUuid, strSlfName, strWellName, m_strTrackName, strLineName);
+                }
                 //
                 //m_listLineName.push_back(strLineName);
 
@@ -190,7 +254,62 @@ void PreQTableWidget::dropEvent(QDropEvent *event)
                     //新建表格曲线
                     emit CallManage::getInstance()->sig_AddTableLine(m_strUuid, strSlfName, strWellName, m_strTrackName, strLineName);
                 }
-
+                else if(strType=="depthObject")
+                {
+                    qDebug() << "新建深度";
+                    //新建曲线
+                    emit CallManage::getInstance()->sig_AddDepth(m_strUuid, strSlfName, strWellName, m_strTrackName, strLineName);
+                }
+                else if(strType=="ganzhuangtuObject")
+                {
+                    //新建杆状图
+                    emit CallManage::getInstance()->sig_AddGanZhuangTu(m_strUuid, strSlfName, strWellName, m_strTrackName, strLineName);
+                }
+                else if(strType=="JyktObject")
+                {
+                    //新建井眼垮塌矢量图
+                    emit CallManage::getInstance()->sig_AddJykt(m_strUuid, strSlfName, strWellName, m_strTrackName, strLineName);
+                }
+                else if(strType=="DenvObject")
+                {
+                    //新建井斜方位图
+                    emit CallManage::getInstance()->sig_AddDenv(m_strUuid, strSlfName, strWellName, m_strTrackName, strLineName);
+                }
+                else if(strType=="DrawImageObject")
+                {
+                    //图像 成图
+                    emit CallManage::getInstance()->sig_AddDrawImage(m_strUuid, strSlfName, strWellName, m_strTrackName, strLineName);
+                }
+                else if(strType=="SantuyibiaoObject")
+                {
+                    //斜井三图一表
+                    emit CallManage::getInstance()->sig_AddSantuyibiao(m_strUuid, strSlfName, strWellName, m_strTrackName, strLineName);
+                }
+                else if(strType=="CrackObject")
+                {
+                    //裂缝
+                    emit CallManage::getInstance()->sig_AddCrack(m_strUuid, strSlfName, strWellName, m_strTrackName, strLineName);
+                }
+                else if(strType=="JiegutextObject")
+                {
+                    //气测/FMT/射孔/文本
+                    emit CallManage::getInstance()->sig_AddJiegutext(m_strUuid, strSlfName, strWellName, m_strTrackName, strLineName);
+                }
+                else if(strType=="LogfaceObject")
+                {
+                    //沉积相
+                    emit CallManage::getInstance()->sig_AddLogface(m_strUuid, strSlfName, strWellName, m_strTrackName, strLineName);
+                }
+                else if(strType=="MCalsObject")
+                {
+                    //多臂井径
+                    emit CallManage::getInstance()->sig_AddMCals(m_strUuid, strSlfName, strWellName, m_strTrackName, strLineName);
+                }
+                else if(strType=="TubingstringObject")
+                {
+                    //套管组件
+                    emit CallManage::getInstance()->sig_AddTubingstring(m_strUuid, strSlfName, strWellName, m_strTrackName, strLineName);
+                }
                 //
                 //m_listLineName.push_back(strLineName);
 
@@ -237,9 +356,10 @@ void PreQTableWidget::performDrag()
              // 执行拖拽操作
              m_AddSuc = false;
              Qt::DropAction dropAction = drag->exec(Qt::MoveAction);
-             if (dropAction == Qt::MoveAction) { //&& m_AddSuc
+             if (dropAction == Qt::MoveAction)
+             {
                  // 处理拖拽结束的逻辑，例如从界面上移除拖拽的项
-                 removeRow(iCurrentRow);
+//                 removeRow(iCurrentRow);
                  if(strType=="curveObject")
                  {
                      //删除曲线
@@ -252,12 +372,67 @@ void PreQTableWidget::performDrag()
                  }
                  else if(strType=="tableObject")
                  {
-                    //删除波列
+                    //删除表格
                     emit CallManage::getInstance()->sig_delTableLine(m_strUuid, formInfo->m_strWellName, formInfo->m_strTrackName, formInfo->m_strLineName);
                  }
+                 else if(strType=="depthObject")
+                 {
+                     //深度
 
-                 //
+                 }
-                 //m_listLineName.removeOne(formInfo->m_strLineName);
+                 else if(strType=="ganzhuangtuObject")
+                 {
+                     //杆状图
+
+                 }
+                 else if(strType=="JyktObject")
+                 {
+                     //井眼垮塌矢量图
+
+                 }
+                 else if(strType=="DenvObject")
+                 {
+                     //井斜方位图
+
+                 }
+                 else if(strType=="DrawImageObject")
+                 {
+                     //图像 成图
+
+                 }
+                 else if(strType=="SantuyibiaoObject")
+                 {
+                     //斜井三图一表
+
+                 }
+                 else if(strType=="CrackObject")
+                 {
+                     //裂缝
+
+                 }
+                 else if(strType=="JiegutextObject")
+                 {
+                     //气测/FMT/射孔/文本
+                     //删除表格
+                     emit CallManage::getInstance()->sig_delTableLine(m_strUuid, formInfo->m_strWellName, formInfo->m_strTrackName, formInfo->m_strLineName);
+                 }
+                 else if(strType=="LogfaceObject")
+                 {
+                     //沉积相
+                     //删除表格
+                     emit CallManage::getInstance()->sig_delTableLine(m_strUuid, formInfo->m_strWellName, formInfo->m_strTrackName, formInfo->m_strLineName);
+                 }
+                 else if(strType=="MCalsObject")
+                 {
+                     //多臂井径
+
+                 }
+                 else if(strType=="TubingstringObject")
+                 {
+                     //套管组件
+                     //删除表格
+                     emit CallManage::getInstance()->sig_delTableLine(m_strUuid, formInfo->m_strWellName, formInfo->m_strTrackName, formInfo->m_strLineName);
+                 }
              }
          }
     }