追加裂痕视图

CallManage/CallManage.h

@@ -62,6 +62,9 @@ signals:
 	//图像 成像
     void sig_AddDrawImage(QString strUuid, QString strSlfName, QString strWellName, QString strTrackName, QString strLineName, int nW = 0);
 
+    //裂痕
+    void sig_AddCrack(QString strUuid, QString strSlfName, QString strWellName, QString strTrackName, QString strLineName, int nW = 0);
+
     //新建波列
     void sig_AddWave(QString strUuid, QString strSlfName, QString strWellName, QString strTrackName, QString strWaveName);
     //删除波列

logPlus/3rd_qcustomplot/v2_1/qcustomplot.h

@@ -7482,7 +7482,7 @@ public:
     QCPItemAnchor *const bottomLeft;
     QCPItemAnchor *const left;
 
-    bool m_bCustom;
+    bool m_bCustom = false;
     float m_fx;
     float m_fy;
 

logPlus/PickFrac.cpp

@@ -0,0 +1,220 @@
+#include <math.h>
+#include <cassert>
+#include <QApplication>
+#include <QDebug>
+#include "memrdwt.h"
+#include "PickFrac.h"
+#include "geometryutils.h"
+
+CPickFrac::CPickFrac(QMyCustomPlot *myCustomPlot, QString strSlfName, QString csCurve, int iMyWidth)
+{
+    m_myCustomPlot = myCustomPlot;
+    m_iMyWidth = iMyWidth;
+
+    m_Name="Frac_Hole.Table";
+    m_strDevi = "DEVI";
+    m_strHazi = "HAZI";
+
+    ReadFracDef();
+
+    for (int i = 0 ; i < iFracType ; i++)
+    {
+        m_bTypeDraw[i] = true;
+    }
+
+    ReadData(strSlfName, csCurve);
+}
+
+CPickFrac::~CPickFrac(void)
+{
+    m_FracDef.clear();
+}
+
+void CPickFrac::ReadFracDef()
+{
+    m_FracDef.clear();
+
+    QString fracFilePath = GetConfPath() + "FRAC.CFG";
+
+    //
+    FRAC_DEF_Crack fd;
+    char str[512],name[512];
+    int r,g,b,id;
+    FILE *fp;
+    QString qs;
+    fp = fopen(fracFilePath.toStdString().c_str(),"r");
+    if ( fp !=NULL )
+    {
+        fgets(str,256,fp);   // 跳过第一行
+        while (!feof(fp))
+        {
+            fgets(str,256,fp);
+            qs = str;
+            qs.trimmed();
+            if (qs.length() < 8) break ;
+            //代码  名称     形状代码(1:正弦曲线 2:连线 3:封闭区域)    颜色(红 绿 蓝)     线宽度
+            sscanf(str,"%d %s %d %d %d %d %d",&fd.iCode,name,&fd.iType,&r,&g,&b,&fd.nLineWidth);
+            fd.crColor = QColor(r,g,b);//RGB(r,g,b);
+            fd.csName = name;
+            fd.csName = fd.csName.trimmed();//.Trim();
+            fd.bDraw = 0;
+            m_FracDef.append(fd);
+            if ( feof(fp))
+                break;
+        }
+        fclose(fp);
+    }
+    else
+    {
+        sprintf(name,"打开裂缝参数配置文件错误:%s!",str);
+        QMessageBox::information(NULL, "读取文件失败", name);
+    }
+}
+
+void CPickFrac::ReadData(QString strSlfName, QString csCurve)
+{
+    if(strSlfName.isEmpty()) return;
+
+    if(csCurve=="AC"||csCurve=="")
+    {
+        csCurve="Frac_Hole.Table";
+    }
+
+    QString cs;
+    int nLineWidth=2;
+    int nField;
+    QColor crColor(255,0,0);
+    FRAC_TABLE_Crack frac;
+    FRAC_TABLE_OLD_Crack fracold;
+    CMemRdWt mrw;
+    char strFracTable[256];
+    int i,j,iIndex,nCount,iType=1;
+
+    if (mrw.Open(strSlfName.toStdString().c_str()) )  // 打开井文件
+    {
+        QString name(csCurve);
+        iIndex=mrw.OpenTable(name.toStdString().c_str());
+        if(iIndex>=0)
+        {
+            nField=mrw.GetTableFieldCount(iIndex);
+            nCount=mrw.GetTableRecordCount(iIndex);
+            cs ="";
+            for(i=0;i<nCount;i++)
+            {
+                if ( nField == 7 ) //老的裂缝表
+                {
+                    mrw.ReadTable(iIndex,i+1,(void*)&fracold);
+                    frac.AorX = fracold.AorX;
+                    frac.DEP = fracold.DEP;
+                    frac.DIPorS = fracold.DIPorS;
+                    frac.DIR = fracold.DIR;
+                    frac.W = fracold.W;
+                    frac.ID = fracold.ID;
+                    frac.XETAorH = fracold.XETAorH;
+                    frac.NUM = 0;
+                    for (j=0; j<16; j++)
+                        frac.point[j].x = frac.point[j].y = 0;
+                }
+                else{
+                    // 扩充后的裂缝表
+                    mrw.ReadTable(iIndex,i+1,(void*)&frac);
+                }
+
+                for (j=0; j<m_FracDef.count(); j++)
+                {
+                    if ( m_FracDef[j].iCode == frac.ID )
+                    {
+                        cs = m_FracDef[j].csName;
+                        iType = m_FracDef[j].iType;
+                        nLineWidth = m_FracDef[j].nLineWidth;
+                        crColor = m_FracDef[j].crColor;
+
+                        //
+                        drawOne(frac, cs, iType, nLineWidth, crColor);
+                        break;
+                    }
+                }
+            }
+            mrw.CloseTable(iIndex);
+        }
+        mrw.Close();  //关闭井文件
+    }
+}
+
+//
+void CPickFrac::drawOne(FRAC_TABLE_Crack frac, QString cs, int iType, int nLineWidth, QColor crColor)
+{
+    int j,nPoint=360;
+    float x,y,h,oy;
+    float PI,xScale,xx;
+    PI=2.*3.14159265/nPoint;
+    h = frac.AorX/2.0;
+    oy = -(frac.DEP+h);
+
+    xScale=(float)(nPoint)/(float)(m_iMyWidth);
+
+    QPen pPen(crColor, nLineWidth);
+    QVector<double> xVec, yVec;
+
+    switch ( iType  )
+    {
+    case 1: //正弦曲线
+       nPoint = 360;
+       for(j=0; j<nPoint; j++)
+       {
+            x=(float)(j)/xScale;
+            float tempValue = oy - (float)(h)*cos((j-frac.XETAorH)*PI);
+            y=tempValue;//m_myCustomPlot->xAxis->coordToPixel(tempValue)
+
+            xVec.append(x);
+            yVec.append(y);
+       }
+       for(j=0; j<nPoint-1; j++)
+       {
+            QCPItemLine *qcpItemLine = new QCPItemLine(m_myCustomPlot);
+            qcpItemLine->start->setCoords(yVec[j], xVec[j]);
+            qcpItemLine->end->setCoords(yVec[j+1], xVec[j+1]);
+            qcpItemLine->setPen(pPen);
+        }
+        break;
+    case 2:   //连线
+        nPoint = frac.NUM;
+        for(j=0; j<nPoint-1; j++)
+        {
+            QCPItemLine *qcpItemLine = new QCPItemLine(m_myCustomPlot);
+            qcpItemLine->start->setCoords(-frac.point[j].y, frac.point[j].x);
+            qcpItemLine->end->setCoords(-frac.point[j+1].y, frac.point[j+1].x);
+            qcpItemLine->setPen(pPen);
+            j++;//j+2
+        }
+        break;
+    case 3:   // 封闭区域
+        nPoint = frac.NUM;
+        for(j=0; j<nPoint; j++)
+        {
+             QCPItemLine *qcpItemLine = new QCPItemLine(m_myCustomPlot);
+             qcpItemLine->start->setCoords(-frac.point[j].y, frac.point[j].x);
+             if(j>=(nPoint-1))
+             {
+                 qcpItemLine->end->setCoords(-frac.point[0].y, frac.point[0].x);
+             }
+             else
+             {
+                 qcpItemLine->end->setCoords(-frac.point[j+1].y, frac.point[j+1].x);
+             }
+             qcpItemLine->setPen(pPen);
+         }
+
+        break;
+    case 4: //直线
+        nPoint = frac.NUM;
+        if(nPoint>=2)
+        {
+            QCPItemStraightLine *qcpItemLine = new QCPItemStraightLine(m_myCustomPlot);
+            qcpItemLine->point1->setCoords(-frac.point[0].y, frac.point[0].x);//位置
+            qcpItemLine->point2->setCoords(-frac.point[1].y, frac.point[1].x);//位置
+            qcpItemLine->setPen(pPen);
+        }
+        break;
+    }
+}

logPlus/PickFrac.h

@@ -0,0 +1,75 @@
+#ifndef DrawFrac_H
+#define DrawFrac_H
+
+#include <QObject>
+#include "qmycustomplot.h"
+
+//const int iFracType=15;
+
+typedef struct tagPOINTF
+{
+    float x;
+    float y;
+} POINTF;
+
+typedef struct
+{
+    int iCode; //代码
+    QString csName;// 名称
+    int iType; //形状代码(1:正弦曲线 2:连线 3:封闭区域)
+    QColor crColor; //颜色(红 绿 蓝)
+    int nLineWidth;//线宽度
+    int bDraw;     // 是否显示
+}FRAC_DEF_Crack;
+
+typedef struct
+{
+    float DEP;
+    float AorX;  //XRMI_DYN_DipHeight
+    float XETAorH;//XRMI_DYN_Azimuth
+    float W;
+    float DIPorS;//XRMI_DYN_Dip_APP
+    float DIR;//XRMI_DYN_Azimuth
+    float TDIP;  //真倾角 Dip_TRU
+    float TDIR;  //真倾向 Azimuth
+    float ID;//裂缝代码,type
+    float NUM;
+    //float X[16],Y[16];//X0,Y0,X1,Y1,X2,Y2,X3,Y3,X4,Y4,X5,Y5,X6,Y6,X7,Y7,X8,Y8,X9,Y9;
+    POINTF point[16];
+}FRAC_TABLE_Crack;
+
+typedef struct
+{
+    float DEP;
+    float AorX;
+    float XETAorH;
+    float W;
+    float DIPorS;
+    float DIR;
+    float ID;//裂缝代码
+}FRAC_TABLE_OLD_Crack;
+
+class CPickFrac:public QObject
+{	
+	Q_OBJECT
+public:
+    CPickFrac(QMyCustomPlot *widget, QString strSlfName, QString csCurve, int iMyWidth);
+    virtual ~CPickFrac(void);
+
+public:
+    QString m_Name;
+    QString m_strDevi, m_strHazi;
+    QList <FRAC_DEF_Crack> m_FracDef;
+    bool m_bTypeDraw[iFracType];
+
+    QMyCustomPlot *m_myCustomPlot;
+    int m_iMyWidth=0;
+public:
+    void ReadFracDef();
+    void ReadData(QString strSlfName, QString csCurve);
+    void drawOne(FRAC_TABLE_Crack frac, QString cs, int iType, int nLineWidth, QColor crColor);
+
+public slots:
+
+};
+#endif

logPlus/formdraw.cpp

@@ -8,6 +8,7 @@
 #include "TransparentDraggableRect.h"
 #include <QtMath>
 #include "Gradient.h"
+#include "PickFrac.h"
 
 //以下参数从配置文件读取
 extern int g_iIndex;
@@ -72,6 +73,9 @@ FormDraw::FormDraw(QWidget *parent, QString strWellName, QString strTrackName) :
     //图像 成图
     connect(CallManage::getInstance(), SIGNAL(sig_AddDrawImage(QString, QString, QString, QString, QString, int)), this, SLOT(s_addDrawImage(QString, QString, QString, QString, QString,int)));
 
+    //裂缝
+    connect(CallManage::getInstance(), SIGNAL(sig_AddCrack(QString, QString, QString, QString, QString, int)), this, SLOT(s_addCrack(QString, QString, QString, QString, QString,int)));
+
 }
 
 FormDraw::~FormDraw()
@@ -1234,6 +1238,93 @@ void FormDraw::s_addDrawImage(QString strUuid, QString strSlfName, QString strWe
 
 }
 
+void FormDraw::s_addCrack(QString strUuid, QString strSlfName, QString strWellName, QString strTrackName, QString strLineName, int nW)
+{
+    //井名&道名不一致
+    if(strUuid == m_strUuid && m_strWellName == strWellName && m_strTrackName == strTrackName)
+    {
+    }
+    else
+    {
+        return;
+    }
+
+    if(m_listLineName.contains(strLineName))
+    {
+        qDebug() << "FormDraw strLineName already exist! " << strLineName;
+        return;
+    }
+
+    //
+    QMyCustomPlot *curv = new QMyCustomPlot(this, strSlfName, strWellName, strTrackName, strLineName);
+    curv->m_strUuid = m_strUuid;
+    //背景设置成透明色
+    curv->setBackground(Qt::transparent);
+    curv->setStyleSheet("background: transparent;");
+    //
+    double dHight = 0;
+    dHight = (g_iY2-g_iY1)*100.0/(double)g_iScale * g_dPixelPerCm;
+    if(g_iShow==1)
+    {
+        //显示刻度
+        dHight = dHight+30;
+    }
+    qDebug() << "FormDraw dHight=" << QString::number((int)dHight);
+    if(dHight>32767)
+    {
+        dHight = 32767;
+    }
+
+    curv->setGeometry(0, 0, g_iOneWidth, (int)dHight);//7500-3184
+    curv->show();
+
+    //-------------------
+    m_LeftVal = 0;
+    m_RightVal = 360;
+
+    int iMyWidth = curv->axisRect(0)->width();
+    float vmax = iMyWidth;
+    float vmin = 0;
+    curv->m_iX1 = vmin;
+    curv->m_iX2 = vmax;
+    curv->m_iY1 = g_iY1;
+    curv->m_iY2 = g_iY2;
+    //
+    curv->xAxis->setRange(vmin, vmax);
+    curv->yAxis->setRange(g_iY1, g_iY2);
+    curv->axisRect()->setupFullAxesBox();
+    //
+    curv->xAxis->ticker()->setTickCount(10);//x个主刻度
+    curv->yAxis->ticker()->setTickCount(60);//y个主刻度
+
+    //对调XY轴，在最前面设置
+    QCPAxis *yAxis = curv->yAxis;
+    QCPAxis *xAxis = curv->xAxis;
+    curv->xAxis = yAxis;
+    curv->yAxis = xAxis;
+
+    //裂缝
+    QString strWaveName = "FRAC_HOLE.TABLE";
+    int _nSamples = 360;
+
+    CPickFrac *pickFrac = new CPickFrac(curv, strSlfName, strWaveName, iMyWidth);
+
+    //
+    connect(curv, SIGNAL(mouseWheel(QWheelEvent*)), this, SLOT(s_mouseWheel(QWheelEvent*)));
+
+    //
+    m_listLineName.push_back(strLineName);
+
+    QString strAliasName = "裂缝描述";
+    QString strUnit = "";
+    QColor newlineColor=QColor(0,0,0);
+    double width=2;
+    QString strScaleType = "";
+    //道-对象
+    m_formTrack->Add(strSlfName, m_strWellName, m_strTrackName, strWaveName, strAliasName, strUnit, newlineColor, width, m_RightVal, m_LeftVal, strScaleType, "CrackObject");
+
+}
+
 void FormDraw::initForm(QMyCustomPlot *widget, QString strSlfName, QString strLineName,
                         double newLeftScale, double newRightScale, QString strScaleType, QColor lineColor, double width, Qt::PenStyle lineStyle)
 {

logPlus/formdraw.h

@@ -12,7 +12,7 @@
 
 #pragma execution_character_set("utf-8")
 
-const int iFracType=15;
+//const int iFracType=15;
 //蝌蚪图
 typedef struct FRACDEF
 {
@@ -210,6 +210,8 @@ public slots:
     void s_addDenv(QString strUuid, QString strSlfName, QString strWellName, QString strTrackName, QString strLineName, int nW);
     //图像 成像
     void s_addDrawImage(QString strUuid, QString strSlfName, QString strWellName, QString strTrackName, QString strLineName, int nW);
+    //裂缝
+    void s_addCrack(QString strUuid, QString strSlfName, QString strWellName, QString strTrackName, QString strLineName, int nW);
 
     //
     void s_addWave(QString strUuid, QString strSlfName, QString strWellName, QString strTrackName, QString strWaveName);

logPlus/forminfo.cpp

@@ -245,7 +245,7 @@ void FormInfo::paintEvent(QPaintEvent* event)
         //岩心分析，不绘制左右范围
         painter.drawText(rect.left(), rect.top()+rect.height()/3, rect.width(), rect.height()/3 ,Qt::AlignCenter, "岩心实验数据");
     }
-    else if(m_strLineName=="FRAC_HOLE.TABLE")
+    else if(m_strLineName=="FRAC_HOLE.TABLE" && m_strType=="tableObject")
     {
         //蝌蚪图，不绘制左右范围
         painter.drawText(rect.left(), rect.top()+rect.height()/3, rect.width(), rect.height()/3 ,Qt::AlignCenter, "蝌蚪图");

logPlus/formtrack.cpp

@@ -75,6 +75,10 @@ FormTrack::FormTrack(QWidget *parent, QString strWellName, QString strTrackName)
     connect(this, SIGNAL(sig_AddDrawImage(QString, QString, QString, QString, QString, QString, QColor, double, float, float, QString)),
             this, SLOT(s_addDrawImage(QString, QString, QString, QString, QString, QString, QColor, double, float, float, QString)));
 
+    //裂缝
+    connect(this, SIGNAL(sig_AddCrack(QString, QString, QString, QString, QString, QString, QColor, double, float, float, QString)),
+            this, SLOT(s_addCrack(QString, QString, QString, QString, QString, QString, QColor, double, float, float, QString)));
+
     //曲线选中，置顶
     connect(CallManage::getInstance(), SIGNAL(sig_Raise(QString, QString, QString, QString, QString)), this, SLOT(s_Raise(QString, QString, QString, QString, QString)));
 
@@ -140,6 +144,10 @@ void FormTrack::Add(QString strSlfName, QString strWellName, QString strTrackNam
     {
         emit sig_AddDrawImage(strSlfName, strWellName, m_strTrackName, strLineName, strAliasName, strUnit, lineColor, dWidth, vmax, vmin, strScaleType);
     }
+    else if(strType=="CrackObject")
+    {
+        emit sig_AddCrack(strSlfName, strWellName, m_strTrackName, strLineName, strAliasName, strUnit, lineColor, dWidth, vmax, vmin, strScaleType);
+    }
 }
 
 void FormTrack::setDrawDt(QStringList listdt, float vmax, float vmin)
@@ -540,6 +548,40 @@ void FormTrack::s_addDrawImage(QString strSlfName, QString strWellName, QString
     ui->tableWidget->setCellWidget(row, 0, formInfo);
 }
 
+void FormTrack::s_addCrack(QString strSlfName, QString strWellName, QString strTrackName, QString strLineName, QString strAliasName, QString strUnit, QColor lineColor, double dWidth, float vmax, float vmin, QString strScaleType)
+{
+    qDebug() << "FormTrack s_addCrack";
+
+    ui->tableWidget->m_strUuid = m_strUuid;
+    int row = ui->tableWidget->rowCount();
+    ui->tableWidget->setRowCount(row + 1);
+
+    //避免出现小滚动条
+    //ui->tableWidget->resize(g_iOneWidth, 100*(row + 1)+10);
+    //this->resize(g_iOneWidth, 100*(row + 1)+30);
+
+    //曲线信息栏
+    FormInfo *formInfo = new FormInfo(this, strSlfName, strWellName, strTrackName, strLineName, lineColor);
+    formInfo->m_strUuid = m_strUuid;
+    formInfo->m_strAliasName = strAliasName;
+    formInfo->m_strUnit = strUnit;
+    formInfo->m_strScaleType = strScaleType;
+    formInfo->m_strType = "CrackObject";
+    formInfo->m_nJg = 2;
+    formInfo->setLineWidth(dWidth);
+    formInfo->setVMax(vmax);
+    formInfo->setVMin(vmin);
+    formInfo->setFrontColor(QColor(0,0,0));
+    formInfo->setBackColor(QColor(255,255,255));
+    //设置高度
+    ui->tableWidget->setRowHeight(row, 100);
+    //单元格委托
+    //ui->tableWidget->setItemDelegateForRow(row, m_delegate);
+    //
+    ui->tableWidget->setCellWidget(row, 0, formInfo);
+}
+
+
 QJsonObject FormTrack::makeJson()
 {
     // 创建根对象

logPlus/formtrack.h

@@ -77,6 +77,7 @@ signals:
     void sig_AddDenv(QString strSlfName, QString strWellName, QString strTrackName, QString strLineName, QString strAliasName, QString strUnit, QColor lineColor, double dWidth, float vmax, float vmin, QString strScaleType);
     void sig_AddYanXinImage(QString strSlfName, QString strWellName, QString strTrackName, QString strLineName, QString strAliasName, QString strUnit, QColor lineColor, double dWidth, float vmax, float vmin, QString strScaleType);
     void sig_AddDrawImage(QString strSlfName, QString strWellName, QString strTrackName, QString strLineName, QString strAliasName, QString strUnit, QColor lineColor, double dWidth, float vmax, float vmin, QString strScaleType);
+    void sig_AddCrack(QString strSlfName, QString strWellName, QString strTrackName, QString strLineName, QString strAliasName, QString strUnit, QColor lineColor, double dWidth, float vmax, float vmin, QString strScaleType);
 
 
 public slots:
@@ -90,6 +91,7 @@ public slots:
     void s_addDenv(QString strSlfName, QString strWellName, QString strTrackName, QString strLineName, QString strAliasName, QString strUnit, QColor lineColor, double dWidth, float vmax, float vmin, QString strScaleType);
     void s_addYanXinImage(QString strSlfName, QString strWellName, QString strTrackName, QString strLineName, QString strAliasName, QString strUnit, QColor lineColor, double dWidth, float vmax, float vmin, QString strScaleType);
     void s_addDrawImage(QString strSlfName, QString strWellName, QString strTrackName, QString strLineName, QString strAliasName, QString strUnit, QColor lineColor, double dWidth, float vmax, float vmin, QString strScaleType);
+    void s_addCrack(QString strSlfName, QString strWellName, QString strTrackName, QString strLineName, QString strAliasName, QString strUnit, QColor lineColor, double dWidth, float vmax, float vmin, QString strScaleType);
 
 	void s_Raise(QString strUuid, QString strSlfName, QString strWellName, QString strTrackName, QString strLineName);
 

logPlus/formwell.cpp

@@ -181,6 +181,11 @@ void FormWell::s_NewTrack(QString strUuid, QString strWellName, QString strSlfNa
             //图像 成图
             emit CallManage::getInstance()->sig_AddDrawImage(m_strUuid, strSlfName, strWellName, strTrackName, strLineName);
         }
+        else if(strType=="CrackObject")
+        {
+            //裂缝
+            emit CallManage::getInstance()->sig_AddCrack(m_strUuid, strSlfName, strWellName, strTrackName, strLineName);
+        }
     }
 
     //ui->tableWidget->resizeColumnsToContents(); // 调整列宽以适应内容

logPlus/logPlus.pro

@@ -34,6 +34,7 @@ SOURCES += \
         Gradient.cpp \
         InDefTableDlg.cpp \
         InterfaceWidget.cpp \
+        PickFrac.cpp \
         PropertyWidget.cpp \
         QCPSizeHandle.cpp \
         QCPSizeHandleManager.cpp \
@@ -77,6 +78,7 @@ HEADERS += \
         Gradient.h \
         InDefTableDlg.h \
         InterfaceWidget.h \
+        PickFrac.h \
         PropertyWidget.h \
         QCPSizeHandle.h \
         QCPSizeHandleManager.h \

logPlus/mainwindowcurve.cpp

@@ -376,6 +376,7 @@ void MainWindowCurve::initToolBar()
     connect(m_mudloggingAc, &QAction::triggered, this, &MainWindowCurve::s_NewMudlogging);//录井剖面
     connect(m_txtAc, &QAction::triggered, this, &MainWindowCurve::s_NewTxt);//岩性描述
     connect(m_coreimageAc, &QAction::triggered, this, &MainWindowCurve::s_NewCoreImage);//岩心照片
+    connect(m_crackAc, &QAction::triggered, this, &MainWindowCurve::s_NewCrack);//裂缝
     connect(m_showdipAc, &QAction::triggered, this, &MainWindowCurve::s_NewShowDip);//蝌蚪图
 
     connect(m_pinlvAc, &QAction::triggered, this, &MainWindowCurve::s_pinLvAc);//频率统计图
@@ -989,6 +990,17 @@ void MainWindowCurve::s_NewCoreImage()
     NewWellAndTrack(sret.at(0), sret.at(1), "IMAGE_DATA", "tableObject");
 }
 
+//裂缝
+void MainWindowCurve::s_NewCrack()
+{
+    QStringList sret = this->getSelectWell();
+    if(sret.length() <= 0)
+        return;
+
+    //新建井+道+曲线(首条)
+    NewWellAndTrack(sret.at(0), sret.at(1), "FRAC_HOLE.TABLE", "CrackObject");
+}
+
 //蝌蚪图
 void MainWindowCurve::s_NewShowDip()
 {

logPlus/mainwindowcurve.h

@@ -121,6 +121,7 @@ public slots:
     void s_NewMudlogging(); // 录井剖面
     void s_NewTxt();        // 岩性描述
     void s_NewCoreImage();  // 岩心照片
+    void s_NewCrack();      // 裂缝
     void s_NewShowDip();    // 蝌蚪图
     void s_pinLvAc();       // 频率统计
     void s_NewGanZhuangTu(); // 杆状图

logPlus/qmycustomplot.h

@@ -8,6 +8,8 @@
 
 #pragma execution_character_set("utf-8")
 
+const int iFracType=15;
+
 class QMyCustomPlot : public QCustomPlot
 {
     Q_OBJECT