diff --git a/common/geometryutils.cpp b/common/geometryutils.cpp
index 75df866..13e9f0e 100644
--- a/common/geometryutils.cpp
+++ b/common/geometryutils.cpp
@@ -1182,3 +1182,26 @@ int GetLineWidth(QPainter * painter,int flWidth)
 	else if(abs(temp)<=1) temp=1;
 	return (int)temp;
 }
+
+QString GBKToUTF8(const QByteArray& gbkData) {
+	QTextCodec* gbkCodec = QTextCodec::codecForName("GBK");
+	if (!gbkCodec) {
+		return QString();
+	}
+
+	// 将GBK编码的字节转换为Unicode QString
+	QString unicodeStr = gbkCodec->toUnicode(gbkData);
+	return unicodeStr;
+}
+
+// UTF-8 转 GBK
+QByteArray UTF8ToGBK(const QString& utf8Str) {
+	QTextCodec* gbkCodec = QTextCodec::codecForName("GBK");
+	if (!gbkCodec) {
+		return QByteArray();
+	}
+
+	// 将Unicode QString转换为GBK编码的字节
+	return gbkCodec->fromUnicode(utf8Str);
+}
+
diff --git a/common/geometryutils.h b/common/geometryutils.h
index 458c5ec..e4aadbf 100644
--- a/common/geometryutils.h
+++ b/common/geometryutils.h
@@ -237,6 +237,9 @@ QString GetLithSymbolDir(QString cs=QDir::separator());
 QString GetGujingSymbolDir(QString cs=QDir::separator());
 int GetLineWidth(QPainter * painter,int flWidth);
 
+QString GBKToUTF8(const QByteArray& gbkData);
+QByteArray UTF8ToGBK(const QString& utf8Str);
+
 struct WellHead
 {
     WellHead()
diff --git a/logPlus/TransparentGroupResult.cpp b/logPlus/TransparentGroupResult.cpp
index 6cf036f..6058efc 100644
--- a/logPlus/TransparentGroupResult.cpp
+++ b/logPlus/TransparentGroupResult.cpp
@@ -50,6 +50,79 @@ void TransparentGroupResult::addResultToPlot(double left_Low, double right_Hight
 	m_mapDraggable_Result[strUuid] = dragRect;
 }
 
+QString TransparentGroupResult::getIconName(const QMap<QString, QString>& zoneOrder, const QString& result_str, int nidx, double dMDepth)
+{
+	QString result = "";
+	QString iconshotname = "";
+	if (result_str.length() == 1)
+	{
+		if (nidx > 0)
+			return result;
+
+		if (result_str.length() > 0 && dMDepth)
+			iconshotname = zoneOrder.key(result_str.at(0));
+		else
+			iconshotname = zoneOrder.key(result_str);
+	}
+	else
+	{
+		if (dMDepth != 0) {
+			if (result_str.length() > nidx)
+				iconshotname = zoneOrder.key(result_str.at(nidx));
+
+		}
+	}
+	if (iconshotname != "") {
+		result = ::GetOilSymbolDir() + iconshotname + ".svg";
+		QDir fexit;
+		if (!fexit.exists(result))
+			result = ::GetOilSymbolDir() + iconshotname + ".png";
+	}
+	return result;
+}
+
+void TransparentGroupResult::addAllResultToPlot(LAYER_DATA* pResult)
+{
+	QMap<QString, QString> zoneOrder = GetZoneOrder();//初始化ZoneOrder  层序号根据层位名来，配置文件在conf\\RESULT.txt
+
+//
+	QDir fexit;
+	QString result_str = QString::number(pResult->Result);
+
+	QVector<float> vecDepth;
+	vecDepth << pResult->MDepth1 << pResult->MDepth1;
+	vecDepth << pResult->MDepth2 << pResult->MDepth3 << pResult->MDepth4 << pResult->MDepth5;
+	vecDepth << pResult->MDepth6 << pResult->MDepth7 << pResult->MDepth8 << pResult->MDepth9 << pResult->MDepth10;
+
+	QString strUuid = "";
+	for (int i = 0; i < vecDepth.size()-1; i++)
+	{
+		QString result = getIconName(zoneOrder, result_str, i, vecDepth.at(i));
+
+		if (result != "")
+		{
+			double dEnd = vecDepth.at(i + 1);
+			double dStart = vecDepth.at(i);
+			if (i == 0)
+			{
+				dStart= pResult->StartDepth;
+			}
+			if (dEnd != 0)
+			{
+				//第一个加Zone解释层号
+				this->addResultToPlot(-dEnd, -dStart, result, strUuid);
+			}
+			else
+			{
+				this->addResultToPlot(-pResult->EndDepth, -dStart, result, strUuid);
+			}
+		}
+
+	}
+	
+
+}
+
 //设置最小宽度
 void TransparentGroupResult::setMinWidth(double minWidth)
 {
diff --git a/logPlus/TransparentGroupResult.h b/logPlus/TransparentGroupResult.h
index 961d092..cf757e5 100644
--- a/logPlus/TransparentGroupResult.h
+++ b/logPlus/TransparentGroupResult.h
@@ -23,6 +23,10 @@ public:
 
 	void addResultToPlot(double left_Low, double right_Hight, QString myResult, QString &strUuid);
 
+	QString getIconName(const QMap<QString, QString>& zoneOrder, const QString& result_str, int nidx, double dMDepth);
+
+	void addAllResultToPlot(LAYER_DATA* pResult);
+
     //设置最小宽度
     void setMinWidth(double minWidth);
     //设置标题
diff --git a/logPlus/formdraw.cpp b/logPlus/formdraw.cpp
index 357096c..3a25fb7 100644
--- a/logPlus/formdraw.cpp
+++ b/logPlus/formdraw.cpp
@@ -3583,7 +3583,6 @@ void FormDraw::initResult(QMyCustomPlot *widget, QString strSlfName, QString str
 
 }
 
-
 bool FormDraw::LoadFromSLF_Result(QMyCustomPlot *widget, QString strSlfName, QString strLineName)
 {
     static bool isrun=false;
@@ -3618,316 +3617,10 @@ bool FormDraw::LoadFromSLF_Result(QMyCustomPlot *widget, QString strSlfName, QSt
 
             if(m_Result->StartDepth==m_Result->EndDepth) continue;
 
-            //以下字段为临时添加，后面需要和pai数据组集成
-            //tmp code
-            QString resultNo;//解释层号
-            QString result;//油气结论
-            double thick;//有效厚度
-            double tt;//累计厚度
-            QString result1;//油气结论2
-            QString result2;//油气结论3
-            QString result3;//油气结论3
-            QString result4;//油气结论3
-            QString result5;//油气结论3
-            QString result6;//油气结论2
-            QString result7;//油气结论3
-            QString result8;//油气结论3
-            QString result9;//油气结论3
-            QString result10;//油气结论3
-            float m_MDepth1;
-            float m_MDepth2;
-            float m_MDepth3;
-            float m_MDepth4;
-            float m_MDepth5;
-            float m_MDepth6;
-            float m_MDepth7;
-            float m_MDepth8;
-            float m_MDepth9;
-            float m_MDepth10;
-            QString strZone = QString::number(atoi(m_Result->Zone));
-            QString Description1;
-            QString Description2;
-            QString Description3;
-            QString Description4;
-            QString Description5;
-            QString Description6;
-            QString Description7;
-            QString Description8;
-            QString Description9;
-            QString Description10;
-            int m_GEOName;
-            QString m_DEST;
-            float m_SDEP,m_EDEP;
-            float m_SDEP1,m_EDEP1;
-            float m_SDEP2,m_EDEP2;
-            float m_SDEP3,m_EDEP3;
-            float m_SDEP4,m_EDEP4;
-            float m_SDEP5,m_EDEP5;
-            float m_SDEP6,m_EDEP6;
-            float m_SDEP7,m_EDEP7;
-            float m_SDEP8,m_EDEP8;
-            float m_SDEP9,m_EDEP9;
-            float m_SDEP10,m_EDEP10;
-            //0代表直接绘制  1代表平铺 2代表拉伸 默认值是2
-
-            QMap<QString,QString> zoneOrder = GetZoneOrder();//初始化ZoneOrder  层序号根据层位名来，配置文件在conf\\RESULT.txt
-
-            //
-            QDir fexit;
-            QString result_str=QString::number(m_Result->Result);
-            QString iconshotname;
-            if(result_str.length()>0&&m_Result->MDepth1)
-                iconshotname=zoneOrder.key(result_str.at(0));
-            else
-                iconshotname=zoneOrder.key(result_str);
-
-            if(iconshotname!=""){
-                result=::GetOilSymbolDir()+iconshotname+".svg";
-                if(!fexit.exists(result))
-                {
-                    result=::GetOilSymbolDir()+iconshotname+".png";
-                }
-            }
-            if(m_Result->MDepth1!=0) {
-                if(result_str.length()>1) iconshotname=zoneOrder.key(QString::number(m_Result->Result).at(1));
-                if(iconshotname!=""){
-                    result1=::GetOilSymbolDir()+iconshotname+".svg";
-                    if(!fexit.exists(result1))
-                        result1=::GetOilSymbolDir()+iconshotname+".png";
-                }
-            }
-
-            if(m_Result->MDepth2!=0) {
-                if(result_str.length()>2) iconshotname=zoneOrder.key(result_str.at(2));
-                if(iconshotname!=""){
-                    result2=::GetOilSymbolDir()+iconshotname+".svg";
-                    if(!fexit.exists(result2))
-                        result2=::GetOilSymbolDir()+iconshotname+".png";
-                }
-            }
-            if(m_Result->MDepth3!=0) {
-                if(result_str.length()>3) iconshotname=zoneOrder.key(result_str.at(3));
-                if(iconshotname!=""){
-                    result3=::GetOilSymbolDir()+iconshotname+".svg";
-                    if(!fexit.exists(result3))
-                        result3=::GetOilSymbolDir()+iconshotname+".png";
-                }
-            }
-            if(m_Result->MDepth4!=0) {
-                if(result_str.length()>4) iconshotname=zoneOrder.key(result_str.at(4));
-                if(iconshotname!=""){
-                    result4=::GetOilSymbolDir()+iconshotname+".svg";
-                    if(!fexit.exists(result4))
-                        result4=::GetOilSymbolDir()+iconshotname+".png";
-                }
-            }
-            if(m_Result->MDepth5!=0) {
-                if(result_str.length()>5) iconshotname=zoneOrder.key(result_str.at(5));
-                if(iconshotname!=""){
-                    result5=::GetOilSymbolDir()+iconshotname+".svg";
-                    if(!fexit.exists(result5))
-                        result5=::GetOilSymbolDir()+iconshotname+".png";
-                }
-            }
-            if(m_Result->MDepth6!=0) {
-                if(result_str.length()>6) iconshotname=zoneOrder.key(result_str.at(6));
-                if(iconshotname!=""){
-                    result6=::GetOilSymbolDir()+iconshotname+".svg";
-                    if(!fexit.exists(result6))
-                        result6=::GetOilSymbolDir()+iconshotname+".png";
-                }
-            }
-            if(m_Result->MDepth7!=0) {
-                if(result_str.length()>7) iconshotname=zoneOrder.key(result_str.at(7));
-                if(iconshotname!=""){
-                    result7=::GetOilSymbolDir()+iconshotname+".svg";
-                    if(!fexit.exists(result7))
-                        result7=::GetOilSymbolDir()+iconshotname+".png";
-                }
-            }
-            if(m_Result->MDepth8!=0) {
-                if(result_str.length()>8) iconshotname=zoneOrder.key(result_str.at(8));
-                if(iconshotname!=""){
-                    result8=::GetOilSymbolDir()+iconshotname+".svg";
-                    if(!fexit.exists(result8))
-                        result8=::GetOilSymbolDir()+iconshotname+".png";
-                }
-            }
-            if(m_Result->MDepth9!=0) {
-                if(result_str.length()>9) iconshotname=zoneOrder.key(result_str.at(9));
-                if(iconshotname!=""){
-                    result9=::GetOilSymbolDir()+iconshotname+".svg";
-                    if(!fexit.exists(result9))
-                        result9=::GetOilSymbolDir()+iconshotname+".png";
-                }
-            }
-            if(m_Result->MDepth10!=0) {
-                if(result_str.length()>10) iconshotname=zoneOrder.key(result_str.at(10));
-                if(iconshotname!=""){
-                    result10=::GetOilSymbolDir()+iconshotname+".svg";
-                    if(!fexit.exists(result10))
-                        result10=::GetOilSymbolDir()+iconshotname+".png";
-                }
-            }
+            QString strZone = QString::number(atoi(m_Result->Zone));            
             // 设置解释结论终止深度
             TransparentGroupResult* pGroup = widget->addResultGroup(-m_Result->EndDepth, -m_Result->StartDepth, strGroupUuid, strZone);
-            QString strUuid = "";
-            if (result != "")
-            {
-                if (m_Result->MDepth1 != 0)
-                {
-                    //第一个加Zone解释层号
-                    pGroup->addResultToPlot(-m_Result->MDepth1, -m_Result->StartDepth, result, strUuid);
-                }
-                else
-                {
-                    pGroup->addResultToPlot(-m_Result->EndDepth, -m_Result->StartDepth, result, strUuid);
-                }
-            }
-            if (result1 != "")
-            {
-                if (m_Result->MDepth2 != 0)
-                {
-                    pGroup->addResultToPlot(-m_Result->MDepth2, -m_Result->MDepth1, result1, strUuid);
-                }
-                else {
-                    pGroup->addResultToPlot(-m_Result->EndDepth, -m_Result->MDepth1, result1, strUuid);
-                }
-            }
-
-            if (result2 != "")
-            {
-                if (m_Result->MDepth3 != 0)
-                {
-                    pGroup->addResultToPlot(-m_Result->MDepth3, -m_Result->MDepth2, result2, strUuid);
-                }
-                else {
-                    pGroup->addResultToPlot(-m_Result->EndDepth, -m_Result->MDepth2, result2, strUuid);
-                }
-            }
-            continue;
-            //
-            strUuid = "";
-            if(result != "")
-            {
-                if(m_Result->MDepth1!=0)
-                {
-                    //第一个加Zone解释层号
-                    widget->addResultToPlot(-m_Result->MDepth1, -m_Result->StartDepth,  result, strUuid, strZone);
-                }
-                else
-                {
-                    widget->addResultToPlot(-m_Result->EndDepth, -m_Result->StartDepth,  result, strUuid, strZone);
-                }
-            }
-            //return true;
-            if(result1 != "")
-            {
-                if(m_Result->MDepth2!=0)
-                {
-                    widget->addResultToPlot(-m_Result->MDepth2, -m_Result->MDepth1,  result1, strUuid);
-                }
-                else {
-                    widget->addResultToPlot(-m_Result->EndDepth, -m_Result->MDepth1,  result1, strUuid);
-                }
-            }
-
-            if(result2 != "")
-            {
-                if(m_Result->MDepth3!=0)
-                {
-                    widget->addResultToPlot(-m_Result->MDepth3, -m_Result->MDepth2,  result2, strUuid);
-                }
-                else {
-                    widget->addResultToPlot(-m_Result->EndDepth, -m_Result->MDepth2,  result2, strUuid);
-                }
-            }
-
-            if(result3 != "")
-            {
-                if(m_Result->MDepth4!=0)
-                {
-                    widget->addResultToPlot(-m_Result->MDepth4, -m_Result->MDepth3,  result3, strUuid);
-                }
-                else {
-                    widget->addResultToPlot(-m_Result->EndDepth, -m_Result->MDepth3,  result3, strUuid);
-                }
-            }
-
-            if(result4 != "")
-            {
-                if(m_Result->MDepth5!=0)
-                {
-                    widget->addResultToPlot(-m_Result->MDepth5, -m_Result->MDepth4,  result4, strUuid);
-                }
-                else {
-                    widget->addResultToPlot(-m_Result->EndDepth, -m_Result->MDepth4,  result4, strUuid);
-                }
-            }
-
-            if(result5 != "")
-            {
-                if(m_Result->MDepth6!=0)
-                {
-                    widget->addResultToPlot(-m_Result->MDepth6, -m_Result->MDepth5,  result5, strUuid);
-                }
-                else{
-                    widget->addResultToPlot(-m_Result->EndDepth, -m_Result->MDepth5,  result5, strUuid);
-                }
-            }
-
-            if(result6 != "")
-            {
-                if(m_Result->MDepth6!=0)
-                {
-                    widget->addResultToPlot(-m_Result->MDepth7, -m_Result->MDepth6,  result6, strUuid);
-                }
-                else {
-                    widget->addResultToPlot(-m_Result->EndDepth, -m_Result->MDepth6,  result6, strUuid);
-                }
-            }
-
-            if(result7 != "")
-            {
-                if(m_Result->MDepth8!=0)
-                {
-                    widget->addResultToPlot(-m_Result->MDepth8, -m_Result->MDepth7,  result7, strUuid);
-                }
-                else {
-                    widget->addResultToPlot(-m_Result->EndDepth, -m_Result->MDepth7,  result7, strUuid);
-                }
-            }
-
-            if(result8 != "")
-            {
-                if(m_Result->MDepth9!=0)
-                {
-                    widget->addResultToPlot(-m_Result->MDepth9, -m_Result->MDepth8,  result8, strUuid);
-                }
-                else {
-                    widget->addResultToPlot(-m_Result->EndDepth, -m_Result->MDepth8,  result8, strUuid);
-                }
-            }
-
-            if(result9 != "")
-            {
-                if(m_Result->MDepth10!=0)
-                {
-                    widget->addResultToPlot(-m_Result->MDepth10, -m_Result->MDepth9,  result9, strUuid);
-                }
-                else{
-                    widget->addResultToPlot(-m_Result->EndDepth, -m_Result->MDepth9,  result9, strUuid);
-                }
-            }
-
-            if(result10 != "")
-            {
-                if(m_Result->MDepth10!=0)
-                {
-                    widget->addResultToPlot(-m_Result->EndDepth, -m_Result->MDepth10,  result10, strUuid);
-                }
-            }
-
+			pGroup->addAllResultToPlot(m_Result);
         }
         logio->CloseTable(iIndex);
         delete pstr;