diff --git a/CallManage/CallManage.h b/CallManage/CallManage.h
index 1153c12..9de0d1b 100644
--- a/CallManage/CallManage.h
+++ b/CallManage/CallManage.h
@@ -38,8 +38,9 @@ signals:
     void sig_CloseProject();//关闭项目
 
     void sig_ShowCurve(QString strSlfName, QString strName);//曲线数据查看
+    void sig_DepthShift(QString strSlfName, QString strName, double DepthOffset);//深度移动
     void sig_ShowTable(QString strSlfName, QString strName);//表格数据查看
-    void sig_WelllogInformation(QString strSlfName, QString strName);//编辑测井信息
+    void sig_WelllogInformation(QString strSlfName);//编辑测井信息
 
     // 0.Uuid 1.WellName 2.SlfName 3.lineName 4.Type 5.W
     void sig_NewCol(QStringList listdt);
diff --git a/logPlus/mainwindow.cpp b/logPlus/mainwindow.cpp
index c80338e..77eb607 100644
--- a/logPlus/mainwindow.cpp
+++ b/logPlus/mainwindow.cpp
@@ -87,7 +87,7 @@ MainWindow::MainWindow(QWidget *parent) :
     connect(CallManage::getInstance(), SIGNAL(sig_ShowTable(QString, QString)), this, SLOT(s_ShowTable(QString, QString)));
 
     //关联信号槽，测井信息表数据查看
-    connect(CallManage::getInstance(), SIGNAL(sig_WelllogInformation(QString, QString)), this, SLOT(s_WelllogInformation(QString, QString)));
+    connect(CallManage::getInstance(), SIGNAL(sig_WelllogInformation(QString)), this, SLOT(s_WelllogInformation(QString)));
 }
 
 MainWindow::~MainWindow()
@@ -519,7 +519,7 @@ void MainWindow::s_ShowTable(QString strSlfName, QString strName)
 }
 
 //编辑测井信息
-void MainWindow::s_WelllogInformation(QString strSlfName, QString strName)
+void MainWindow::s_WelllogInformation(QString strSlfName)
 {
     if(m_centerWidgets)
     {
diff --git a/logPlus/mainwindow.h b/logPlus/mainwindow.h
index 75e203d..1386a14 100644
--- a/logPlus/mainwindow.h
+++ b/logPlus/mainwindow.h
@@ -91,7 +91,7 @@ public slots:
 
     void s_ShowCurve(QString strSlfName, QString strName);//曲线数据查看
     void s_ShowTable(QString strSlfName, QString strName);//表格数据查看
-    void s_WelllogInformation(QString strSlfName, QString strName);//编辑测井信息
+    void s_WelllogInformation(QString strSlfName);//编辑测井信息
 
 };
 
diff --git a/logPlus/mainwindowcurve.cpp b/logPlus/mainwindowcurve.cpp
index 79ac7c3..07b9adf 100644
--- a/logPlus/mainwindowcurve.cpp
+++ b/logPlus/mainwindowcurve.cpp
@@ -116,6 +116,7 @@ MainWindowCurve::MainWindowCurve(QWidget *parent) :
     //曲线选中，置顶
     connect(CallManage::getInstance(), SIGNAL(sig_Raise(QString, QString, QString, QString, QString, int)), this, SLOT(s_Raise(QString, QString, QString, QString, QString, int)));
 
+
     //图头
     m_dock1=new QDockWidget(tr(""),this);
     m_dock1->setFeatures(QDockWidget::NoDockWidgetFeatures);//QDockWidget::DockWidgetMovable
@@ -617,9 +618,171 @@ void MainWindowCurve::s_Shift()
     }
 }
 
+void MainWindowCurve::MoveShift(QString strSlfName, QString strLineName, float sdep,float edep,float delta)
+{
+    if(sdep>=edep&&delta==0) return;
+    if(strSlfName=="") return;
+    CMemRdWt * logio=new CMemRdWt();
+    if(!logio->Open(strSlfName.toStdString().c_str(),CSlfIO::modeReadWrite))
+    {
+        delete logio;
+        //AppendConsole(pai::log::PAI_ERROR,"SLF文件打开失败，请检查！");
+        return;
+    }
+
+    int curveindex=logio->FindObjectName((char*)strLineName.toStdString().c_str());
+    if(curveindex<0)
+    {
+        delete logio;
+        return;
+    }
+    CString szBuffer="";
+
+    if(sdep==edep&&sdep==-9999.0) {
+        szBuffer=QString::number(delta,'f',3)+"\r\n";
+        WriteShiftMessage(*logio,szBuffer,strLineName);
+        logio->CorrectObjectDepth(curveindex,delta);
+        delete logio;
+//		if(isRun) {
+//			isLoad=false;
+//			LoadFromSLF();
+//		}
+        return;
+    }
+    curveindex=logio->OpenChannel(strLineName.toStdString().c_str());
+    if(curveindex>-1) {
+        szBuffer.Format("%10.3f %10.3f %10.3f\r\n",sdep,edep,delta);
+        WriteShiftMessage(*logio,szBuffer,strLineName);
+        logio->MoveDepth(curveindex,sdep,edep,delta);
+    }
+    else {
+        int ObjectType=logio->GetObjectType(strLineName.toStdString().c_str());
+        float sdeps[2],edeps[2];
+        sdeps[0]=sdep;
+        edeps[0]=sdep+delta;
+        sdeps[1]=edep;
+        edeps[1]=edep+delta;
+        szBuffer.Format("%10.3f %10.3f\r\n%10.3f %10.3f\r\n",sdeps[0],edeps[0],sdeps[1],edeps[1]);
+        WriteShiftMessage(*logio,szBuffer,strLineName);
+        if(ObjectType >CARD_OBJECT||ObjectType==0)
+        {
+            int index=logio->OpenTable(strLineName.toStdString().c_str());
+            if(index>-1)
+            {
+                logio->EShiftTableDepth((char*)strLineName.toStdString().c_str(),2,sdeps,edeps);
+            }
+        }
+        else if(ObjectType==CARD_OBJECT) {
+            logio->EshiftStreamDepth((char *)strLineName.toStdString().c_str(),2,sdeps,edeps);
+        }
+    }
+    delete logio;
+//	if(isRun) {
+//		isLoad=false;
+//		LoadFromSLF();
+//	}
+}
+
+void MainWindowCurve::slotRun()
+{
+    double depthshift=spinbox3->text().toFloat();
+    if(depthshift==0) return;
+
+    float sdep=spinbox1->text().toFloat();
+    float edep=spinbox2->text().toFloat();
+    if(sdep>edep) {
+        float depp=sdep;
+        sdep=edep;
+        edep=sdep;
+    }
+
+    if(m_SelectTableItem.m_iTableType==2)
+    {
+        //道
+        QStringList listLine = getLineList(m_SelectTableItem.m_strWellName, m_SelectTableItem.m_strTrackName);
+        if(listLine.size()>0)
+        {
+            for(int i=0; i<listLine.size(); i++)
+            {
+                //单条曲线校深
+                MoveShift(m_SelectTableItem.m_strSlfName, listLine[i], sdep, edep, depthshift);
+            }
+        }
+        else
+        {
+            QMessageBox::warning(this, "提示", "道内曲线对象为空，无对象可校正！");
+            return;
+        }
+    }
+    else if(m_SelectTableItem.m_iTableType==3)
+    {
+        //单条曲线校深
+        MoveShift(m_SelectTableItem.m_strSlfName, m_SelectTableItem.m_strLineName, sdep, edep, depthshift);
+    }
+}
+
 void MainWindowCurve::s_MoveShift()
 {
+    if(m_SelectTableItem.m_iTableType==0) {
+        QMessageBox::warning(this, "提示", "请选择要校正的对象!");
+        return;
+    }
 
+    if(m_SelectTableItem.m_iTableType==1) {
+        QMessageBox::warning(this, "提示", "该功能不支持对井次校正，如果需要井次校正请到数据树上进行!");
+        return;
+    }
+
+    if(m_SelectTableItem.m_iTableType==2 || m_SelectTableItem.m_iTableType==3)
+    {
+        //道，曲线
+        QDialog dialog(NULL);
+        dialog.setModal(false);
+        Qt::WindowFlags flags = dialog.windowFlags();
+        flags |= Qt::WindowStaysOnTopHint;
+        flags &= ~Qt::WindowContextHelpButtonHint;
+        dialog.setWindowFlags(flags);
+        dialog.setWindowTitle("深度分段平移");
+        QFormLayout form(&dialog);
+        form.addWidget(new QLabel("输入深度参数:"));
+        // Value1
+        QString value1 = QString("起始深度: ");
+        spinbox1 = new QLineEdit(&dialog);
+        if(1) {
+            float yGeoNormal =-g_iY2;
+            spinbox1->setText(toString(((int)(yGeoNormal*10+0.5))/10.0));
+        }
+        else spinbox1->setText("-9999.0");
+        form.addRow(value1, spinbox1);
+        value1 = QString("终止深度: ");
+        spinbox2 = new QLineEdit(&dialog);
+        form.addRow(value1, spinbox2);
+        if(1)
+        {
+            spinbox2->setText(toString(-g_iY1));
+        }
+        else spinbox2->setText("-9999.0");
+        value1 = QString("移动量(上移-,下移+): ");
+        spinbox3 = new QLineEdit(&dialog);
+        form.addRow(value1, spinbox3);
+        spinbox3->setText("0");
+        QDialogButtonBox buttonBox(QDialogButtonBox::Ok | QDialogButtonBox::Cancel,
+            Qt::Horizontal, &dialog);
+        //m_ButtonBox=&buttonBox;
+        form.addWidget(&buttonBox);
+
+        //m_LOGS=logs;
+        //QObject::connect(spinbox1, SIGNAL(returnPressed()), this, SLOT(slotSetDep()));
+        //QObject::connect(spinbox2, SIGNAL(returnPressed()), this, SLOT(slotSetDep()));
+        QObject::connect(buttonBox.button(QDialogButtonBox::Ok), SIGNAL(clicked()), this, SLOT(slotRun()));
+        QObject::connect(&buttonBox, SIGNAL(rejected()), &dialog, SLOT(reject()));
+        buttonBox.button(QDialogButtonBox::Ok)->setAutoDefault(false);
+        //slotSetDep();
+        dialog.show();
+        if (dialog.exec() == QDialog::Accepted) {
+            // Do something here
+        }
+    }
 }
 
 QStringList MainWindowCurve::insertCol(int nW)
diff --git a/logPlus/mainwindowcurve.h b/logPlus/mainwindowcurve.h
index f9d6e24..d4be5b7 100644
--- a/logPlus/mainwindowcurve.h
+++ b/logPlus/mainwindowcurve.h
@@ -76,6 +76,10 @@ public:
 
     QtProjectWidgets *m_leftWidgets = NULL;     //左侧工程区
 
+    QLineEdit *spinbox1;
+    QLineEdit *spinbox2;
+    QLineEdit *spinbox3;
+
 public:
     //展示所有井
     void DisplayWells(QJsonArray wellsArray);
@@ -157,8 +161,9 @@ public slots:
     //校深
     void ApplyShiftDepth(QString strSlfName, QString strLineName, double DepthOffset);
     void s_Shift();         // 整体深度平移校正
-    void s_MoveShift();     // 深度分段平移校正
-
+    void MoveShift(QString strSlfName, QString strLineName, float sdep,float edep,float delta);
+    void s_MoveShift();     // 深度分段平移校正    
+    void slotRun();
 
     //
     void s_showHeadTable();     //显示/隐藏图头
diff --git a/logPlus/qmytreewidget.cpp b/logPlus/qmytreewidget.cpp
index 3c5b847..4b95504 100644
--- a/logPlus/qmytreewidget.cpp
+++ b/logPlus/qmytreewidget.cpp
@@ -25,7 +25,7 @@ QString QMyTreeWidget::getCurrentItemString()
     }
 
     QString strTreeTag = item->data(0, Qt::UserRole).toString();
-    if (strTreeTag == "wellItem")
+    if (strTreeTag == "wellItem")//井次名称
     {
         //曲线
         QString strSlfName = item->data(0, Qt::UserRole+1).toString();
diff --git a/logPlus/qtprojectwidgets.cpp b/logPlus/qtprojectwidgets.cpp
index 42d6119..5b596ca 100644
--- a/logPlus/qtprojectwidgets.cpp
+++ b/logPlus/qtprojectwidgets.cpp
@@ -424,7 +424,7 @@ void QtProjectWidgets::loadWellTree(QTreeWidgetItem *parent, QString fileFull, Q
         QTreeWidgetItem *itemwell = new QTreeWidgetItem();
         itemwell->setText(0, wellname);
         itemwell->setData(0, Qt::UserRole, "wellItem"); // 存储额外数据，如ID
-        itemwell->setData(0, Qt::UserRole + 1, fileFull); // 存储额外数据，井次文件路径
+        itemwell->setData(0, Qt::UserRole + 1, fileFull); // 存储额外数据，slf文件路径
         //
         QIcon iconwell;
         iconwell.addPixmap(QPixmap(":/image/left_index.png"), QIcon::Selected);
@@ -627,13 +627,13 @@ void QtProjectWidgets::initMenu()
 void QtProjectWidgets::initRootTreeMenu(QMenu *menu, QTreeWidget *treeWidget)
 {
     m_action_New = new QAction("新建项目", treeWidget);
-    m_action_New->setIcon(QIcon(":/image/u174.png")); // 设置图标
+    m_action_New->setIcon(QIcon(GetImagePath() +  "newproject.png")); // 设置图标
     connect(m_action_New, SIGNAL(triggered(bool)), this, SLOT(onNewProject(bool)));
     menu->addAction(m_action_New);
 
     //
     m_action_Open = new QAction("打开项目", treeWidget);
-    m_action_Open->setIcon(QIcon(":/image/u174.png")); // 设置图标
+    m_action_Open->setIcon(QIcon(GetImagePath() +  "openproject.png")); // 设置图标
     connect(m_action_Open, SIGNAL(triggered(bool)), this, SLOT(onOpenProject(bool)));
     menu->addAction(m_action_Open);
 
@@ -643,40 +643,50 @@ void QtProjectWidgets::initRootTreeMenu(QMenu *menu, QTreeWidget *treeWidget)
 void QtProjectWidgets::initCurveObjectTreeMenu(QMenu *menu, QTreeWidget *treeWidget)
 {
     m_action_ShowCurve = new QAction("数据查看", treeWidget);
-    m_action_ShowCurve->setIcon(QIcon(":/image/u174.png")); // 设置图标
+    m_action_ShowCurve->setIcon(QIcon(GetImagePath() +  "icon/Sheet.png")); // 设置图标":/image/u174.png"
     connect(m_action_ShowCurve, SIGNAL(triggered(bool)), this, SLOT(onShowCurve(bool)));
     menu->addAction(m_action_ShowCurve);
+    //
+    m_action_DepthShift = new QAction("深度移动", treeWidget);
+    m_action_DepthShift->setIcon(QIcon(GetImagePath() +  "icon/RigidDepthShifting.png")); // 设置图标
+    connect(m_action_DepthShift, SIGNAL(triggered(bool)), this, SLOT(onDepthShift(bool)));
+    menu->addAction(m_action_DepthShift);
 }
 
 //初始化表格对象-右键菜单
 void QtProjectWidgets::initTableObjectTreeMenu(QMenu *menu, QTreeWidget *treeWidget)
 {
     QAction* action_TableObject = new QAction("数据查看", treeWidget);
-    action_TableObject->setIcon(QIcon(":/image/u174.png")); // 设置图标
+    action_TableObject->setIcon(QIcon(GetImagePath() +  "icon/Sheet.png")); // 设置图标
     connect(action_TableObject, SIGNAL(triggered(bool)), this, SLOT(onShowTable(bool)));
     menu->addAction(action_TableObject);
+    //
+    QAction* action_DepthShift = new QAction("深度移动", treeWidget);
+    action_DepthShift->setIcon(QIcon(GetImagePath() +  "icon/RigidDepthShifting.png")); // 设置图标
+    connect(action_DepthShift, SIGNAL(triggered(bool)), this, SLOT(onDepthShift(bool)));
+    menu->addAction(action_DepthShift);
 }
 
 //初始化根节点(井名称)-右键菜单
 void QtProjectWidgets::initWellNameTreeMenu(QMenu *menu, QTreeWidget *treeWidget)
 {
     QAction* action_New = new QAction("导入数据", treeWidget);
-    action_New->setIcon(QIcon(":/image/u174.png")); // 设置图标
+    action_New->setIcon(QIcon(GetImagePath() +  "wellog.png")); // 设置图标
     connect(action_New, SIGNAL(triggered(bool)), this, SLOT(onImportSingleWellLogData()));
     menu->addAction(action_New);
 
     action_New = new QAction("导入离散数据", treeWidget);
-    action_New->setIcon(QIcon(":/image/u174.png")); // 设置图标
+    action_New->setIcon(QIcon(GetImagePath() + "icon/intable.png")); // 设置图标
     connect(action_New, SIGNAL(triggered(bool)), this, SLOT(onImportSlfTable()));
     menu->addAction(action_New);
 
     action_New = new QAction("编辑井基本信息", treeWidget);
-    action_New->setIcon(QIcon(":/image/u174.png")); // 设置图标
+    action_New->setIcon(QIcon(GetImagePath() + "icon/Edit.png")); // 设置图标
     connect(action_New, SIGNAL(triggered(bool)), this, SLOT(onEditWelllogRound()));
     menu->addAction(action_New);
 
     action_New = new QAction("输出数据", treeWidget);
-    action_New->setIcon(QIcon(":/image/u174.png")); // 设置图标
+    action_New->setIcon(QIcon(GetImagePath() + "icon/outcurves.png")); // 设置图标
     connect(action_New, SIGNAL(triggered(bool)), this, SLOT(onOutWellLogRound()));
     menu->addAction(action_New);
 }
@@ -685,16 +695,22 @@ void QtProjectWidgets::initWellNameTreeMenu(QMenu *menu, QTreeWidget *treeWidget
 void QtProjectWidgets::initSlfNameTreeMenu(QMenu *menu, QTreeWidget *treeWidget)
 {
     QAction* action_New = new QAction("编辑测井信息", treeWidget);
-    action_New->setIcon(QIcon(":/image/u174.png")); // 设置图标
+    action_New->setIcon(QIcon(GetImagePath() + "icon/Edit.png")); // 设置图标
     connect(action_New, SIGNAL(triggered(bool)), this, SLOT(onWelllogInformation()));
     menu->addAction(action_New);
+
+    //
+    QAction* action_DepthShift = new QAction("深度移动", treeWidget);
+    action_DepthShift->setIcon(QIcon(GetImagePath() +  "icon/RigidDepthShifting.png")); // 设置图标
+    connect(action_DepthShift, SIGNAL(triggered(bool)), this, SLOT(onDepthShift_Well(bool)));
+    menu->addAction(action_DepthShift);
 }
 
 //初始化根节点(表目录)-右键菜单
 void QtProjectWidgets::initTableFolderTreeMenu(QMenu *menu, QTreeWidget *treeWidget)
 {
     QAction* action_New = new QAction("创建新表", treeWidget);
-    action_New->setIcon(QIcon(":/image/u174.png")); // 设置图标
+    action_New->setIcon(QIcon(GetImagePath() + "icon/CreateTable.png")); // 设置图标
     connect(action_New, SIGNAL(triggered(bool)), this, SLOT(onCreateNewTable()));
     menu->addAction(action_New);
 }
@@ -753,6 +769,47 @@ void QtProjectWidgets::onShowCurve(bool checked)
     emit CallManage::getInstance()->sig_ShowCurve(m_strSlfName, m_strCurveObjectName);
 }
 
+//深度移动
+void QtProjectWidgets::onDepthShift(bool checked)
+{
+    //道，曲线
+    bool ok=0;
+    double depthshift=QInputDialog::getDouble(NULL,"深度移动","请输入移动的深度量(上移-,下移+)",0.0,-2147483647, 2147483647,4,&ok);
+    if(!ok) return;
+    if(depthshift==0) return;
+    if(depthshift>10)
+    {
+        int flag = QMessageBox::warning(this->parentWidget(),"提示",QString("深度移动量 =")+QString::number(depthshift)+"m\n"+"\n您确定执行校正?",
+            QMessageBox::Yes,QMessageBox::No);
+        if(flag==QMessageBox::No)
+        {
+            return;
+        }
+    }
+
+    //emit CallManage::getInstance()->sig_DepthShift(m_strSlfName, m_strCurveObjectName, depthshift);
+    //1.修改内存数据
+    if(m_strSlfName=="") return ;
+    CMemRdWt * logio=new CMemRdWt();
+    if(!logio->Open(m_strSlfName.toStdString().c_str(),CSlfIO::modeReadWrite))
+    {
+        delete logio;
+        //AppendConsole(pai::log::PAI_ERROR,"SLF文件打开失败，请检查！");
+        return ;
+    };
+    bool isok=0;
+    //TODO 目前对于表格类，参数卡类不支持,会崩溃
+    int curveindex=logio->FindObjectName((char *)m_strCurveObjectName.toStdString().c_str());
+    if(curveindex>=0) {
+        CString szBuffer="";
+        szBuffer=QString::number(depthshift,'f',3)+"\r\n";
+        WriteShiftMessage(*logio,szBuffer,m_strCurveObjectName);
+        logio->CorrectObjectDepth(curveindex, depthshift);
+        isok=1;
+    }
+    delete logio;
+}
+
 //表格数据查看
 void QtProjectWidgets::onShowTable(bool checked)
 {
@@ -762,7 +819,7 @@ void QtProjectWidgets::onShowTable(bool checked)
 //编辑测井信息
 void QtProjectWidgets::onWelllogInformation()
 {
-    emit CallManage::getInstance()->sig_WelllogInformation(m_strSlfName, m_strCurveObjectName);
+    emit CallManage::getInstance()->sig_WelllogInformation(m_strSlfName);
     foreach(QTreeWidgetItem *pItem, ui->treeWidget->selectedItems())
     {
         QTreeWidgetItem *parentItem = pItem;
@@ -791,6 +848,53 @@ void QtProjectWidgets::onWelllogInformation()
     }
 }
 
+//深度移动(井次)
+void QtProjectWidgets::onDepthShift_Well(bool checked)
+{
+    //道，曲线
+    bool ok=0;
+    double depthshift=QInputDialog::getDouble(NULL,"深度移动","请输入移动的深度量(上移-,下移+)",0.0,-2147483647, 2147483647,4,&ok);
+    if(!ok) return;
+    if(depthshift==0) return;
+    if(depthshift>10)
+    {
+        int flag = QMessageBox::warning(this->parentWidget(),"提示",QString("深度移动量 =")+QString::number(depthshift)+"m\n"+"\n您确定执行校正?",
+            QMessageBox::Yes,QMessageBox::No);
+        if(flag==QMessageBox::No)
+        {
+            return;
+        }
+    }
+
+    //emit CallManage::getInstance()->sig_DepthShift(m_strSlfName, m_strCurveObjectName, depthshift);
+    //1.修改内存数据
+    if(m_strSlfName=="") return ;
+    CMemRdWt * logio=new CMemRdWt();
+    if(!logio->Open(m_strSlfName.toStdString().c_str(),CSlfIO::modeReadWrite))
+    {
+        delete logio;
+        return ;
+    };
+    int Count=logio->GetObjectCount();
+    char objname[100];
+    for(int i=0;i<Count;i++) {
+        if(logio->GetObjectStatus(i)!=OBJECT_NORMAL) continue;
+        logio->GetObjectName(i,objname);
+        int index=logio->OpenChannel(objname);
+        if(index==-1) continue;
+        int iIndex=logio->FindObjectName(objname);
+        if(iIndex>-1)
+        {
+            logio->CorrectObjectDepth(iIndex,depthshift);
+        }
+        CString szBuffer="";
+        szBuffer=QString::number(depthshift,'f',3);
+        szBuffer+="\r\n";
+        WriteShiftMessage(*logio,szBuffer,objname);
+    }
+    delete logio;
+}
+
 //创建新表
 void QtProjectWidgets::onCreateNewTable()
 {
@@ -966,15 +1070,15 @@ void QtProjectWidgets::onItemClicked(QTreeWidgetItem* item, int index)
     }
     else if (strTreeTag == "wellItem")
     {
-        //根节点(项目名称)-右键菜单
+        //井次名称-右键菜单
         popMenu = _menuSlfName;
         m_strSlfName = item->data(0, Qt::UserRole+1).toString();
     }
     else if (strTreeTag == "Sheet")
     {
-        //根节点(项目名称)-右键菜单
+        //表格数据-右键菜单
         popMenu = _menuTableFolder;
-        m_strSlfName = item->parent()->data(0, Qt::UserRole+1).toString();
+        m_strSlfName = item->parent()->data(0, Qt::UserRole+1).toString();//从父节点（井次）获取slf
     }
 
     //
diff --git a/logPlus/qtprojectwidgets.h b/logPlus/qtprojectwidgets.h
index 736e1af..a99a18f 100644
--- a/logPlus/qtprojectwidgets.h
+++ b/logPlus/qtprojectwidgets.h
@@ -40,13 +40,17 @@ public slots:
 
     //曲线
     void onShowCurve(bool checked = false);	    //数据查看
+    void onDepthShift(bool checked = false);	//深度移动
     //表格
     void onShowTable(bool checked = false);	    //数据查看
 	void onEditWelllogRound();
     void onImportSingleWellLogData();
     void onImportSlfTable();
     void onOutWellLogRound();
+    //井次
     void onWelllogInformation();                //编辑测井信息
+    void onDepthShift_Well(bool checked = false);	//深度移动
+    //表格数据 根节点
     void onCreateNewTable();                    //创建新表
 public:
     //初始化树图控件
@@ -69,6 +73,7 @@ public:
 
     //曲线对象(AC、BS...)-右键菜单
     QAction* m_action_ShowCurve;
+    QAction* m_action_DepthShift;
 
     QString m_strSlfName;
     QString m_strCurveObjectName;