diff --git a/logPlus/CallManage.h b/logPlus/CallManage.h
index 1a58bfe..86f54e5 100644
--- a/logPlus/CallManage.h
+++ b/logPlus/CallManage.h
@@ -106,6 +106,9 @@ signals:
 	//LogMud
 	void sig_AddLogMud(QString strUuid, QString strSlfName, QString strWellName, QString strTrackName, QString strLineName, int nW = 0);
 
+    //拖拽井次，生成多井
+    void sig_AddMultiWell(QString strUuid, QString strSlfName, QString strWellName);
+
     //新建波列
     void sig_AddWave(QString strUuid, QString strSlfName, QString strWellName, QString strTrackName, QString strWaveName);
     //删除波列
@@ -333,9 +336,9 @@ signals:
     void sig_changeMCalsProperty(QString strUuid, QString strSlfName, QString strWellName, QString strTrackName, QString strLineName, QString strNewLineName);
 
     //关闭当前tab页，重新打开新模板
-    void sig_tabCloseCurrent(QString fileFull, QString fileName);
+    void sig_tabCloseCurrent(QString fileFull, QString fileName, bool bMultiProject);
     //加载视图(重新打开)
-    void sig_ReOpen(QString fileFull, QString fileName);
+    void sig_ReOpen(QString fileFull, QString fileName, bool bMultiProject);
 
     //重新设置滚动条范围(头)
     void sig_setRangeVScrollBar2(QString strUuid);
diff --git a/logPlus/customtabwidget.cpp b/logPlus/customtabwidget.cpp
index 8aeecc7..03b0290 100644
--- a/logPlus/customtabwidget.cpp
+++ b/logPlus/customtabwidget.cpp
@@ -39,7 +39,7 @@ CustomTabWidget::CustomTabWidget(QWidget *parent)
     //关闭tab时，信号槽触发的函数
     connect(m_pTabBar, SIGNAL(tabCloseRequested(int)),this,SLOT(slot_tabClose(int)));
     //关闭当前tab页，重新打开新模板
-    connect(CallManage::getInstance(), SIGNAL(sig_tabCloseCurrent(QString, QString)), this, SLOT(slot_tabCloseCurrent(QString, QString)));
+    connect(CallManage::getInstance(), SIGNAL(sig_tabCloseCurrent(QString, QString, bool)), this, SLOT(slot_tabCloseCurrent(QString, QString, bool)));
 
 }
 
@@ -239,7 +239,7 @@ void CustomTabWidget::slot_tabClose(int index)
 }
 
 //关闭
-void CustomTabWidget::slot_tabCloseCurrent(QString fileFull, QString fileName)
+void CustomTabWidget::slot_tabCloseCurrent(QString fileFull, QString fileName, bool bMultiProject)
 {
     QWidget *selectWidget =  m_pStackedWidget->currentWidget();
     if (selectWidget == NULL)
@@ -260,5 +260,5 @@ void CustomTabWidget::slot_tabCloseCurrent(QString fileFull, QString fileName)
     PropertyService()->InitCurrentViewInfo();
 
     //重新打开新模板
-    emit CallManage::getInstance()->sig_ReOpen(fileFull, fileName);
+    emit CallManage::getInstance()->sig_ReOpen(fileFull, fileName, bMultiProject);
 }
diff --git a/logPlus/customtabwidget.h b/logPlus/customtabwidget.h
index 9be376a..12d7212 100644
--- a/logPlus/customtabwidget.h
+++ b/logPlus/customtabwidget.h
@@ -35,7 +35,7 @@ public:
 public slots:
     void setCurrentIndex(int);
     void slot_tabClose(int index);
-    void slot_tabCloseCurrent(QString fileFull, QString fileName);
+    void slot_tabCloseCurrent(QString fileFull, QString fileName, bool bMultiProject);
 
 signals:
     void tabIsEmpty();
diff --git a/logPlus/formdraw.cpp b/logPlus/formdraw.cpp
index 96556d1..6980986 100644
--- a/logPlus/formdraw.cpp
+++ b/logPlus/formdraw.cpp
@@ -576,34 +576,38 @@ void FormDraw::displayCorePhysics(QJsonObject jsonObject)
     QString strType = jsonObject.value("Type").toString();
     QString strLineName = jsonObject.value("LineName").toString();
 
-//    if (jsonObject.contains("SlfName"))
-//    {
-//        QJsonValue value = jsonObject.value("SlfName");
-//        if (value.isString()) {
-//            strSlfName = value.toString();
-//            QString slffilename = QString("");
-//            int ind = strSlfName.lastIndexOf('\\');
-//            int ind2 = strSlfName.lastIndexOf('/');
-//            if (ind2 > ind) ind = ind2;
-//            if (ind > -1) {
-//                slffilename = strSlfName.mid(ind + 1);
-//                strSlfName = slffilename;
-//            }
+    //多井的打开工程，使用模板的井名和slf名
+    if(m_bMultiProject)
+    {
+        if (jsonObject.contains("SlfName"))
+        {
+            QJsonValue value = jsonObject.value("SlfName");
+            if (value.isString()) {
+                strSlfName = value.toString();
+                QString slffilename = QString("");
+                int ind = strSlfName.lastIndexOf('\\');
+                int ind2 = strSlfName.lastIndexOf('/');
+                if (ind2 > ind) ind = ind2;
+                if (ind > -1) {
+                    slffilename = strSlfName.mid(ind + 1);
+                    strSlfName = slffilename;
+                }
 
-//        }
-//    }
-//    if (jsonObject.contains("WellName"))
-//    {
-//        QJsonValue value = jsonObject.value("WellName");
-//        if (value.isString()) {
-//            strWellName = value.toString();
-//            //qDebug() << "WellName:" << strWellName;
-//        }
-//    }
+            }
+        }
+        if (jsonObject.contains("WellName"))
+        {
+            QJsonValue value = jsonObject.value("WellName");
+            if (value.isString()) {
+                strWellName = value.toString();
+                //qDebug() << "WellName:" << strWellName;
+            }
+        }
 
-//    QString folderPath = GetLogdataPath();
-//    folderPath = folderPath + g_prjname;
-//    strSlfName = folderPath + "/" + "#" + strWellName + "/" + strSlfName;
+        QString folderPath = GetLogdataPath();
+        folderPath = folderPath + g_prjname;
+        strSlfName = folderPath + "/" + "#" + strWellName + "/" + strSlfName;
+    }
 
     //此处改为直接使用左侧树图的值
     listOtherProperty.append(strSlfName);
@@ -804,32 +808,41 @@ void FormDraw::displayImageData(QJsonObject lineObjInfo)
     QFont curveNameFont("微软雅黑", 10);	// 名称字体
     QColor lineColor = QColor(0, 0, 0);//颜色
 
-//    if (lineObjInfo.contains("SlfName"))
-//    {
-//        QJsonValue value = lineObjInfo.value("SlfName");
-//        if (value.isString()) {
-//            strSlfName = value.toString();
-//            //qDebug() << "SlfName:" << strSlfName;
+    //多井的打开工程，使用模板的井名和slf名
+    if(m_bMultiProject)
+    {
+        if (lineObjInfo.contains("SlfName"))
+        {
+            QJsonValue value = lineObjInfo.value("SlfName");
+            if (value.isString()) {
+                strSlfName = value.toString();
+                //qDebug() << "SlfName:" << strSlfName;
+
+                //
+                QString slffilename = QString("");
+                int ind = strSlfName.lastIndexOf('\\');
+                int ind2 = strSlfName.lastIndexOf('/');
+                if (ind2 > ind) ind = ind2;
+                if (ind > -1) {
+                    slffilename = strSlfName.mid(ind + 1);
+                    strSlfName = slffilename;
+                }
+            }
+        }
+        if (lineObjInfo.contains("WellName"))
+        {
+            QJsonValue value = lineObjInfo.value("WellName");
+            if (value.isString()) {
+                strWellName = value.toString();
+                //qDebug() << "WellName:" << strWellName;
+            }
+        }
+
+        QString folderPath = GetLogdataPath();
+        folderPath = folderPath + g_prjname;
+        strSlfName = folderPath + "/" + "#" + strWellName + "/" + strSlfName;
+    }
 
-//            //
-//            QString slffilename = QString("");
-//            int ind = strSlfName.lastIndexOf('\\');
-//            int ind2 = strSlfName.lastIndexOf('/');
-//            if (ind2 > ind) ind = ind2;
-//            if (ind > -1) {
-//                slffilename = strSlfName.mid(ind + 1);
-//                strSlfName = slffilename;
-//            }
-//        }
-//    }
-//    if (lineObjInfo.contains("WellName"))
-//    {
-//        QJsonValue value = lineObjInfo.value("WellName");
-//        if (value.isString()) {
-//            strWellName = value.toString();
-//            //qDebug() << "WellName:" << strWellName;
-//        }
-//    }
     if (lineObjInfo.contains("LineName"))
     {
         QJsonValue value = lineObjInfo.value("LineName");
@@ -889,10 +902,6 @@ void FormDraw::displayImageData(QJsonObject lineObjInfo)
         }
     }
 
-//    QString folderPath = GetLogdataPath();
-//    folderPath = folderPath + g_prjname;
-//    strSlfName = folderPath + "/" + "#" + strWellName + "/" + strSlfName;
-
     QStringList listOtherProperty;
     listOtherProperty.append(strAliasName);//别名
     listOtherProperty.append(lineColor.name());//名称颜色
@@ -921,32 +930,41 @@ void FormDraw::DisplayTable_One(QJsonObject lineObjInfo)
     QFont curveNameFont("微软雅黑", 10);	// 名称字体
     QColor lineColor = QColor(0, 0, 0);//颜色
 
-//    if (lineObjInfo.contains("SlfName"))
-//    {
-//        QJsonValue value = lineObjInfo.value("SlfName");
-//        if (value.isString()) {
-//            strSlfName = value.toString();
-//            //qDebug() << "SlfName:" << strSlfName;
+    //多井的打开工程，使用模板的井名和slf名
+    if(m_bMultiProject)
+    {
+        if (lineObjInfo.contains("SlfName"))
+        {
+            QJsonValue value = lineObjInfo.value("SlfName");
+            if (value.isString()) {
+                strSlfName = value.toString();
+                //qDebug() << "SlfName:" << strSlfName;
+
+                //
+                QString slffilename = QString("");
+                int ind = strSlfName.lastIndexOf('\\');
+                int ind2 = strSlfName.lastIndexOf('/');
+                if (ind2 > ind) ind = ind2;
+                if (ind > -1) {
+                    slffilename = strSlfName.mid(ind + 1);
+                    strSlfName = slffilename;
+                }
+            }
+        }
+        if (lineObjInfo.contains("WellName"))
+        {
+            QJsonValue value = lineObjInfo.value("WellName");
+            if (value.isString()) {
+                strWellName = value.toString();
+                //qDebug() << "WellName:" << strWellName;
+            }
+        }
+
+        QString folderPath = GetLogdataPath();
+        folderPath = folderPath + g_prjname;
+        strSlfName = folderPath + "/" + "#" + strWellName + "/" + strSlfName;
+    }
 
-//            //
-//            QString slffilename = QString("");
-//            int ind = strSlfName.lastIndexOf('\\');
-//            int ind2 = strSlfName.lastIndexOf('/');
-//            if (ind2 > ind) ind = ind2;
-//            if (ind > -1) {
-//                slffilename = strSlfName.mid(ind + 1);
-//                strSlfName = slffilename;
-//            }
-//        }
-//    }
-//    if (lineObjInfo.contains("WellName"))
-//    {
-//        QJsonValue value = lineObjInfo.value("WellName");
-//        if (value.isString()) {
-//            strWellName = value.toString();
-//            //qDebug() << "WellName:" << strWellName;
-//        }
-//    }
     if (lineObjInfo.contains("LineName"))
     {
         QJsonValue value = lineObjInfo.value("LineName");
@@ -1063,10 +1081,6 @@ void FormDraw::DisplayTable_One(QJsonObject lineObjInfo)
         }
     }
 
-//    QString folderPath = GetLogdataPath();
-//    folderPath = folderPath + g_prjname;
-//    strSlfName = folderPath + "/" + "#" + strWellName + "/" + strSlfName;
-
     if (strLineName != "")
     {
         QStringList listOtherProperty;
@@ -1151,32 +1165,41 @@ void FormDraw::DisplayGujing_One(QJsonObject lineObjInfo)
     QFont curveNameFont("微软雅黑", 10);	// 名称字体
     QColor lineColor = QColor(0, 0, 0);//颜色
 
-//    if (lineObjInfo.contains("SlfName"))
-//    {
-//        QJsonValue value = lineObjInfo.value("SlfName");
-//        if (value.isString()) {
-//            strSlfName = value.toString();
-//            //qDebug() << "SlfName:" << strSlfName;
+    //多井的打开工程，使用模板的井名和slf名
+    if(m_bMultiProject)
+    {
+        if (lineObjInfo.contains("SlfName"))
+        {
+            QJsonValue value = lineObjInfo.value("SlfName");
+            if (value.isString()) {
+                strSlfName = value.toString();
+                //qDebug() << "SlfName:" << strSlfName;
+
+                //
+                QString slffilename = QString("");
+                int ind = strSlfName.lastIndexOf('\\');
+                int ind2 = strSlfName.lastIndexOf('/');
+                if (ind2 > ind) ind = ind2;
+                if (ind > -1) {
+                    slffilename = strSlfName.mid(ind + 1);
+                    strSlfName = slffilename;
+                }
+            }
+        }
+        if (lineObjInfo.contains("WellName"))
+        {
+            QJsonValue value = lineObjInfo.value("WellName");
+            if (value.isString()) {
+                strWellName = value.toString();
+                //qDebug() << "WellName:" << strWellName;
+            }
+        }
+
+        QString folderPath = GetLogdataPath();
+        folderPath = folderPath + g_prjname;
+        strSlfName = folderPath + "/" + "#" + strWellName + "/" + strSlfName;
+    }
 
-//            //
-//            QString slffilename = QString("");
-//            int ind = strSlfName.lastIndexOf('\\');
-//            int ind2 = strSlfName.lastIndexOf('/');
-//            if (ind2 > ind) ind = ind2;
-//            if (ind > -1) {
-//                slffilename = strSlfName.mid(ind + 1);
-//                strSlfName = slffilename;
-//            }
-//        }
-//    }
-//    if (lineObjInfo.contains("WellName"))
-//    {
-//        QJsonValue value = lineObjInfo.value("WellName");
-//        if (value.isString()) {
-//            strWellName = value.toString();
-//            //qDebug() << "WellName:" << strWellName;
-//        }
-//    }
     if (lineObjInfo.contains("LineName"))
     {
         QJsonValue value = lineObjInfo.value("LineName");
@@ -1236,10 +1259,6 @@ void FormDraw::DisplayGujing_One(QJsonObject lineObjInfo)
         }
     }
 
-//    QString folderPath = GetLogdataPath();
-//    folderPath = folderPath + g_prjname;
-//    strSlfName = folderPath + "/" + "#" + strWellName + "/" + strSlfName;
-
     if (strLineName != "")
     {
         QStringList listOtherProperty;
@@ -1274,32 +1293,41 @@ void FormDraw::DisplayKedouAndOthers_One(QJsonObject lineObjInfo)
     QFont curveNameFont("微软雅黑", 10);	// 名称字体
     QColor lineColor = QColor(0, 0, 0);//颜色
 
-//    if (lineObjInfo.contains("SlfName"))
-//    {
-//        QJsonValue value = lineObjInfo.value("SlfName");
-//        if (value.isString()) {
-//            strSlfName = value.toString();
-//            //qDebug() << "SlfName:" << strSlfName;
+    //多井的打开工程，使用模板的井名和slf名
+    if(m_bMultiProject)
+    {
+        if (lineObjInfo.contains("SlfName"))
+        {
+            QJsonValue value = lineObjInfo.value("SlfName");
+            if (value.isString()) {
+                strSlfName = value.toString();
+                //qDebug() << "SlfName:" << strSlfName;
+
+                //
+                QString slffilename = QString("");
+                int ind = strSlfName.lastIndexOf('\\');
+                int ind2 = strSlfName.lastIndexOf('/');
+                if (ind2 > ind) ind = ind2;
+                if (ind > -1) {
+                    slffilename = strSlfName.mid(ind + 1);
+                    strSlfName = slffilename;
+                }
+            }
+        }
+        if (lineObjInfo.contains("WellName"))
+        {
+            QJsonValue value = lineObjInfo.value("WellName");
+            if (value.isString()) {
+                strWellName = value.toString();
+                //qDebug() << "WellName:" << strWellName;
+            }
+        }
+
+        QString folderPath = GetLogdataPath();
+        folderPath = folderPath + g_prjname;
+        strSlfName = folderPath + "/" + "#" + strWellName + "/" + strSlfName;
+    }
 
-//            //
-//            QString slffilename = QString("");
-//            int ind = strSlfName.lastIndexOf('\\');
-//            int ind2 = strSlfName.lastIndexOf('/');
-//            if (ind2 > ind) ind = ind2;
-//            if (ind > -1) {
-//                slffilename = strSlfName.mid(ind + 1);
-//                strSlfName = slffilename;
-//            }
-//        }
-//    }
-//    if (lineObjInfo.contains("WellName"))
-//    {
-//        QJsonValue value = lineObjInfo.value("WellName");
-//        if (value.isString()) {
-//            strWellName = value.toString();
-//            //qDebug() << "WellName:" << strWellName;
-//        }
-//    }
     if (lineObjInfo.contains("LineName"))
     {
         QJsonValue value = lineObjInfo.value("LineName");
@@ -1326,10 +1354,6 @@ void FormDraw::DisplayKedouAndOthers_One(QJsonObject lineObjInfo)
         }
     }
 
-//    QString folderPath = GetLogdataPath();
-//    folderPath = folderPath + g_prjname;
-//    strSlfName = folderPath + "/" + "#" + strWellName + "/" + strSlfName;
-
     if (strLineName != "")
     {
         //蝌蚪图、杆状、井眼垮塌矢量图、井斜方位图
@@ -1347,32 +1371,41 @@ void FormDraw::DisplayMCals_One(QJsonObject lineObjInfo)
     QFont curveNameFont("微软雅黑", 10);	// 名称字体
     QColor lineColor = QColor(0, 0, 0);//颜色
 
-//    if (lineObjInfo.contains("SlfName"))
-//    {
-//        QJsonValue value = lineObjInfo.value("SlfName");
-//        if (value.isString()) {
-//            strSlfName = value.toString();
-//            //qDebug() << "SlfName:" << strSlfName;
+    //多井的打开工程，使用模板的井名和slf名
+    if(m_bMultiProject)
+    {
+        if (lineObjInfo.contains("SlfName"))
+        {
+            QJsonValue value = lineObjInfo.value("SlfName");
+            if (value.isString()) {
+                strSlfName = value.toString();
+                //qDebug() << "SlfName:" << strSlfName;
+
+                //
+                QString slffilename = QString("");
+                int ind = strSlfName.lastIndexOf('\\');
+                int ind2 = strSlfName.lastIndexOf('/');
+                if (ind2 > ind) ind = ind2;
+                if (ind > -1) {
+                    slffilename = strSlfName.mid(ind + 1);
+                    strSlfName = slffilename;
+                }
+            }
+        }
+        if (lineObjInfo.contains("WellName"))
+        {
+            QJsonValue value = lineObjInfo.value("WellName");
+            if (value.isString()) {
+                strWellName = value.toString();
+                //qDebug() << "WellName:" << strWellName;
+            }
+        }
+
+        QString folderPath = GetLogdataPath();
+        folderPath = folderPath + g_prjname;
+        strSlfName = folderPath + "/" + "#" + strWellName + "/" + strSlfName;
+    }
 
-//            //
-//            QString slffilename = QString("");
-//            int ind = strSlfName.lastIndexOf('\\');
-//            int ind2 = strSlfName.lastIndexOf('/');
-//            if (ind2 > ind) ind = ind2;
-//            if (ind > -1) {
-//                slffilename = strSlfName.mid(ind + 1);
-//                strSlfName = slffilename;
-//            }
-//        }
-//    }
-//    if (lineObjInfo.contains("WellName"))
-//    {
-//        QJsonValue value = lineObjInfo.value("WellName");
-//        if (value.isString()) {
-//            strWellName = value.toString();
-//            //qDebug() << "WellName:" << strWellName;
-//        }
-//    }
     if (lineObjInfo.contains("LineName"))
     {
         QJsonValue value = lineObjInfo.value("LineName");
@@ -1399,10 +1432,6 @@ void FormDraw::DisplayMCals_One(QJsonObject lineObjInfo)
         }
     }
 
-//    QString folderPath = GetLogdataPath();
-//    folderPath = folderPath + g_prjname;
-//    strSlfName = folderPath + "/" + "#" + strWellName + "/" + strSlfName;
-
     if (strLineName != "")
     {
         //多臂井径
@@ -1420,32 +1449,41 @@ void FormDraw::DisplayJiegutext_One(QJsonObject lineObjInfo)
     QFont curveNameFont("微软雅黑", 10);	// 名称字体
     QColor lineColor = QColor(0, 0, 0);//颜色
 
-//    if (lineObjInfo.contains("SlfName"))
-//    {
-//        QJsonValue value = lineObjInfo.value("SlfName");
-//        if (value.isString()) {
-//            strSlfName = value.toString();
-//            //qDebug() << "SlfName:" << strSlfName;
+    //多井的打开工程，使用模板的井名和slf名
+    if(m_bMultiProject)
+    {
+        if (lineObjInfo.contains("SlfName"))
+        {
+            QJsonValue value = lineObjInfo.value("SlfName");
+            if (value.isString()) {
+                strSlfName = value.toString();
+                //qDebug() << "SlfName:" << strSlfName;
+
+                //
+                QString slffilename = QString("");
+                int ind = strSlfName.lastIndexOf('\\');
+                int ind2 = strSlfName.lastIndexOf('/');
+                if (ind2 > ind) ind = ind2;
+                if (ind > -1) {
+                    slffilename = strSlfName.mid(ind + 1);
+                    strSlfName = slffilename;
+                }
+            }
+        }
+        if (lineObjInfo.contains("WellName"))
+        {
+            QJsonValue value = lineObjInfo.value("WellName");
+            if (value.isString()) {
+                strWellName = value.toString();
+                //qDebug() << "WellName:" << strWellName;
+            }
+        }
+
+        QString folderPath = GetLogdataPath();
+        folderPath = folderPath + g_prjname;
+        strSlfName = folderPath + "/" + "#" + strWellName + "/" + strSlfName;
+    }
 
-//            //
-//            QString slffilename = QString("");
-//            int ind = strSlfName.lastIndexOf('\\');
-//            int ind2 = strSlfName.lastIndexOf('/');
-//            if (ind2 > ind) ind = ind2;
-//            if (ind > -1) {
-//                slffilename = strSlfName.mid(ind + 1);
-//                strSlfName = slffilename;
-//            }
-//        }
-//    }
-//    if (lineObjInfo.contains("WellName"))
-//    {
-//        QJsonValue value = lineObjInfo.value("WellName");
-//        if (value.isString()) {
-//            strWellName = value.toString();
-//            //qDebug() << "WellName:" << strWellName;
-//        }
-//    }
     if (lineObjInfo.contains("LineName"))
     {
         QJsonValue value = lineObjInfo.value("LineName");
@@ -1487,10 +1525,6 @@ void FormDraw::DisplayJiegutext_One(QJsonObject lineObjInfo)
         }
     }
 
-//    QString folderPath = GetLogdataPath();
-//    folderPath = folderPath + g_prjname;
-//    strSlfName = folderPath + "/" + "#" + strWellName + "/" + strSlfName;
-
     if (strLineName != "")
     {
         QStringList listOtherProperty;
@@ -1514,32 +1548,41 @@ void FormDraw::DisplayFac_One(QJsonObject lineObjInfo)
     QFont curveNameFont("微软雅黑", 10);	// 名称字体
     QColor lineColor = QColor(0, 0, 0);//颜色
 
-//    if (lineObjInfo.contains("SlfName"))
-//    {
-//        QJsonValue value = lineObjInfo.value("SlfName");
-//        if (value.isString()) {
-//            strSlfName = value.toString();
-//            //qDebug() << "SlfName:" << strSlfName;
+    //多井的打开工程，使用模板的井名和slf名
+    if(m_bMultiProject)
+    {
+        if (lineObjInfo.contains("SlfName"))
+        {
+            QJsonValue value = lineObjInfo.value("SlfName");
+            if (value.isString()) {
+                strSlfName = value.toString();
+                //qDebug() << "SlfName:" << strSlfName;
+
+                //
+                QString slffilename = QString("");
+                int ind = strSlfName.lastIndexOf('\\');
+                int ind2 = strSlfName.lastIndexOf('/');
+                if (ind2 > ind) ind = ind2;
+                if (ind > -1) {
+                    slffilename = strSlfName.mid(ind + 1);
+                    strSlfName = slffilename;
+                }
+            }
+        }
+        if (lineObjInfo.contains("WellName"))
+        {
+            QJsonValue value = lineObjInfo.value("WellName");
+            if (value.isString()) {
+                strWellName = value.toString();
+                //qDebug() << "WellName:" << strWellName;
+            }
+        }
+
+        QString folderPath = GetLogdataPath();
+        folderPath = folderPath + g_prjname;
+        strSlfName = folderPath + "/" + "#" + strWellName + "/" + strSlfName;
+    }
 
-//            //
-//            QString slffilename = QString("");
-//            int ind = strSlfName.lastIndexOf('\\');
-//            int ind2 = strSlfName.lastIndexOf('/');
-//            if (ind2 > ind) ind = ind2;
-//            if (ind > -1) {
-//                slffilename = strSlfName.mid(ind + 1);
-//                strSlfName = slffilename;
-//            }
-//        }
-//    }
-//    if (lineObjInfo.contains("WellName"))
-//    {
-//        QJsonValue value = lineObjInfo.value("WellName");
-//        if (value.isString()) {
-//            strWellName = value.toString();
-//            //qDebug() << "WellName:" << strWellName;
-//        }
-//    }
     if (lineObjInfo.contains("LineName"))
     {
         QJsonValue value = lineObjInfo.value("LineName");
@@ -1608,10 +1651,6 @@ void FormDraw::DisplayFac_One(QJsonObject lineObjInfo)
         }
     }
 
-//    QString folderPath = GetLogdataPath();
-//    folderPath = folderPath + g_prjname;
-//    strSlfName = folderPath + "/" + "#" + strWellName + "/" + strSlfName;
-
     if (strLineName != "")
     {
         QStringList listOtherProperty;
@@ -1662,32 +1701,41 @@ void FormDraw::DisplayTubing_One(QJsonObject lineObjInfo)
     QFont curveNameFont("微软雅黑", 10);	// 名称字体
     QColor lineColor = QColor(0, 0, 0);//颜色
 
-//    if (lineObjInfo.contains("SlfName"))
-//    {
-//        QJsonValue value = lineObjInfo.value("SlfName");
-//        if (value.isString()) {
-//            strSlfName = value.toString();
-//            //qDebug() << "SlfName:" << strSlfName;
+    //多井的打开工程，使用模板的井名和slf名
+    if(m_bMultiProject)
+    {
+        if (lineObjInfo.contains("SlfName"))
+        {
+            QJsonValue value = lineObjInfo.value("SlfName");
+            if (value.isString()) {
+                strSlfName = value.toString();
+                //qDebug() << "SlfName:" << strSlfName;
+
+                //
+                QString slffilename = QString("");
+                int ind = strSlfName.lastIndexOf('\\');
+                int ind2 = strSlfName.lastIndexOf('/');
+                if (ind2 > ind) ind = ind2;
+                if (ind > -1) {
+                    slffilename = strSlfName.mid(ind + 1);
+                    strSlfName = slffilename;
+                }
+            }
+        }
+        if (lineObjInfo.contains("WellName"))
+        {
+            QJsonValue value = lineObjInfo.value("WellName");
+            if (value.isString()) {
+                strWellName = value.toString();
+                //qDebug() << "WellName:" << strWellName;
+            }
+        }
+
+        QString folderPath = GetLogdataPath();
+        folderPath = folderPath + g_prjname;
+        strSlfName = folderPath + "/" + "#" + strWellName + "/" + strSlfName;
+    }
 
-//            //
-//            QString slffilename = QString("");
-//            int ind = strSlfName.lastIndexOf('\\');
-//            int ind2 = strSlfName.lastIndexOf('/');
-//            if (ind2 > ind) ind = ind2;
-//            if (ind > -1) {
-//                slffilename = strSlfName.mid(ind + 1);
-//                strSlfName = slffilename;
-//            }
-//        }
-//    }
-//    if (lineObjInfo.contains("WellName"))
-//    {
-//        QJsonValue value = lineObjInfo.value("WellName");
-//        if (value.isString()) {
-//            strWellName = value.toString();
-//            //qDebug() << "WellName:" << strWellName;
-//        }
-//    }
     if (lineObjInfo.contains("LineName"))
     {
         QJsonValue value = lineObjInfo.value("LineName");
@@ -1850,10 +1898,6 @@ void FormDraw::DisplayTubing_One(QJsonObject lineObjInfo)
         }
     }
 
-//    QString folderPath = GetLogdataPath();
-//    folderPath = folderPath + g_prjname;
-//    strSlfName = folderPath + "/" + "#" + strWellName + "/" + strSlfName;
-
     if (strLineName != "")
     {
         QStringList listOtherProperty;
@@ -1938,32 +1982,41 @@ void FormDraw::DisplayTvd_One(QJsonObject lineObjInfo)
     QFont curveNameFont("微软雅黑", 10);	// 名称字体
     QColor lineColor = QColor(0, 0, 0);//颜色
 
-//    if (lineObjInfo.contains("SlfName"))
-//    {
-//        QJsonValue value = lineObjInfo.value("SlfName");
-//        if (value.isString()) {
-//            strSlfName = value.toString();
-//            //qDebug() << "SlfName:" << strSlfName;
+    //多井的打开工程，使用模板的井名和slf名
+    if(m_bMultiProject)
+    {
+        if (lineObjInfo.contains("SlfName"))
+        {
+            QJsonValue value = lineObjInfo.value("SlfName");
+            if (value.isString()) {
+                strSlfName = value.toString();
+                //qDebug() << "SlfName:" << strSlfName;
+
+                //
+                QString slffilename = QString("");
+                int ind = strSlfName.lastIndexOf('\\');
+                int ind2 = strSlfName.lastIndexOf('/');
+                if (ind2 > ind) ind = ind2;
+                if (ind > -1) {
+                    slffilename = strSlfName.mid(ind + 1);
+                    strSlfName = slffilename;
+                }
+            }
+        }
+        if (lineObjInfo.contains("WellName"))
+        {
+            QJsonValue value = lineObjInfo.value("WellName");
+            if (value.isString()) {
+                strWellName = value.toString();
+                //qDebug() << "WellName:" << strWellName;
+            }
+        }
+
+        QString folderPath = GetLogdataPath();
+        folderPath = folderPath + g_prjname;
+        strSlfName = folderPath + "/" + "#" + strWellName + "/" + strSlfName;
+    }
 
-//            //
-//            QString slffilename = QString("");
-//            int ind = strSlfName.lastIndexOf('\\');
-//            int ind2 = strSlfName.lastIndexOf('/');
-//            if (ind2 > ind) ind = ind2;
-//            if (ind > -1) {
-//                slffilename = strSlfName.mid(ind + 1);
-//                strSlfName = slffilename;
-//            }
-//        }
-//    }
-//    if (lineObjInfo.contains("WellName"))
-//    {
-//        QJsonValue value = lineObjInfo.value("WellName");
-//        if (value.isString()) {
-//            strWellName = value.toString();
-//            //qDebug() << "WellName:" << strWellName;
-//        }
-//    }
     if (lineObjInfo.contains("LineName"))
     {
         QJsonValue value = lineObjInfo.value("LineName");
@@ -2006,10 +2059,6 @@ void FormDraw::DisplayTvd_One(QJsonObject lineObjInfo)
         }
     }
 
-//    QString folderPath = GetLogdataPath();
-//    folderPath = folderPath + g_prjname;
-//    strSlfName = folderPath + "/" + "#" + strWellName + "/" + strSlfName;
-
     QStringList listOtherProperty;
     //FormInfo高度
     listOtherProperty.append(QString::number(headHeight));
@@ -2663,32 +2712,41 @@ void FormDraw::DisplayLine_One(QJsonObject lineObjInfo)
     QColor frontColor(0, 0, 0);//岩性前景色
     QColor backColor(255, 255, 255);//岩性背景色
 
-//    if (lineObjInfo.contains("SlfName"))
-//    {
-//        QJsonValue value = lineObjInfo.value("SlfName");
-//        if (value.isString()) {
-//            strSlfName = value.toString();
-//            //qDebug() << "SlfName:" << strSlfName;
+    //多井的打开工程，使用模板的井名和slf名
+    if(m_bMultiProject)
+    {
+        if (lineObjInfo.contains("SlfName"))
+        {
+            QJsonValue value = lineObjInfo.value("SlfName");
+            if (value.isString()) {
+                strSlfName = value.toString();
+                //qDebug() << "SlfName:" << strSlfName;
+
+                //
+                QString slffilename = QString("");
+                int ind = strSlfName.lastIndexOf('\\');
+                int ind2 = strSlfName.lastIndexOf('/');
+                if (ind2 > ind) ind = ind2;
+                if (ind > -1) {
+                    slffilename = strSlfName.mid(ind + 1);
+                    strSlfName = slffilename;
+                }
+            }
+        }
+        if (lineObjInfo.contains("WellName"))
+        {
+            QJsonValue value = lineObjInfo.value("WellName");
+            if (value.isString()) {
+                strWellName = value.toString();
+                //qDebug() << "WellName:" << strWellName;
+            }
+        }
+
+        QString folderPath = GetLogdataPath();
+        folderPath = folderPath + g_prjname;
+        strSlfName = folderPath + "/" + "#" + strWellName + "/" + strSlfName;
+    }
 
-//            //
-//            QString slffilename = QString("");
-//            int ind = strSlfName.lastIndexOf('\\');
-//            int ind2 = strSlfName.lastIndexOf('/');
-//            if (ind2 > ind) ind = ind2;
-//            if (ind > -1) {
-//                slffilename = strSlfName.mid(ind + 1);
-//                strSlfName = slffilename;
-//            }
-//        }
-//    }
-//    if (lineObjInfo.contains("WellName"))
-//    {
-//        QJsonValue value = lineObjInfo.value("WellName");
-//        if (value.isString()) {
-//            strWellName = value.toString();
-//            //qDebug() << "WellName:" << strWellName;
-//        }
-//    }
     //    if (lineObjInfo.contains("TrackName"))
     //    {
     //        QJsonValue value = lineObjInfo.value("TrackName");
@@ -2834,10 +2892,6 @@ void FormDraw::DisplayLine_One(QJsonObject lineObjInfo)
         }
     }
 
-//    QString folderPath = GetLogdataPath();
-//    folderPath = folderPath + g_prjname;
-//    strSlfName = folderPath + "/" + "#" + strWellName + "/" + strSlfName;
-
     if (strLineName != "")
     {
         //此处属性注意顺序，后续使用按照顺序
@@ -2988,8 +3042,16 @@ void FormDraw::DisplayType_One(QJsonObject objInfo)
     {
         QStringList dt;
         dt << m_strUuid;
-        dt << g_strWellName;
-        dt << g_strSlfName;
+        //多井的打开工程，使用模板的井名和slf名
+        if(m_bMultiProject)
+        {
+            dt << m_strWellName;
+            dt << m_strSlfName;
+        }
+        else{
+            dt << g_strWellName;
+            dt << g_strSlfName;
+        }
         dt << strLineName;
         dt << strType;
         dt << QString::number(m_nTrackW);
@@ -7448,8 +7510,19 @@ void FormDraw::dropEvent(QDropEvent* event)
             }
             else
             {
-                // 如果井名不正确，不接受拖拽事件
-                event->ignore();
+                if(strType=="wellItem")//井次名称对应多井,统一处理
+                {
+                    //拖拽井次，生成多井
+                    emit CallManage::getInstance()->sig_AddMultiWell(m_strUuid, strSlfName, strWellName);
+                    // 接受拖拽事件
+                    event->setDropAction(Qt::MoveAction);
+                    event->accept();
+                }
+                else
+                {
+                    // 如果井名不正确，不接受拖拽事件
+                    event->ignore();
+                }
             }
         }
         else
diff --git a/logPlus/formdraw.h b/logPlus/formdraw.h
index 75deb65..5afbef5 100644
--- a/logPlus/formdraw.h
+++ b/logPlus/formdraw.h
@@ -148,6 +148,8 @@ public:
     float m_vmax;
     float m_vmin;
 
+    bool m_bMultiProject = false; //多井的打开工程，使用模板的井名和slf名
+
 public:
     void initForm(QMyCustomPlot *widget, QString strSlfName, QString strLineName,
                   double newLeftScale=-9999, double newRightScale=-9999, QString strScaleType="线性", QColor lineColor=QColor(0,0,0), double width=1, Qt::PenStyle lineStyle=Qt::SolidLine, QStringList listOtherProperty={});
diff --git a/logPlus/forminfo.cpp b/logPlus/forminfo.cpp
index 977e768..5eb965f 100644
--- a/logPlus/forminfo.cpp
+++ b/logPlus/forminfo.cpp
@@ -2508,8 +2508,19 @@ void FormInfo::dropEvent(QDropEvent* event)
             }
             else
             {
-                // 如果井名不正确，不接受拖拽事件
-                event->ignore();
+                if(strType=="wellItem")//井次名称对应多井,统一处理
+                {
+                    //拖拽井次，生成多井
+                    emit CallManage::getInstance()->sig_AddMultiWell(m_strUuid, strSlfName, strWellName);
+                    // 接受拖拽事件
+                    event->setDropAction(Qt::MoveAction);
+                    event->accept();
+                }
+                else
+                {
+                    // 如果井名不正确，不接受拖拽事件
+                    event->ignore();
+                }
             }
         }
         else
diff --git a/logPlus/formtracktop.cpp b/logPlus/formtracktop.cpp
index f37bd84..a0b45b5 100644
--- a/logPlus/formtracktop.cpp
+++ b/logPlus/formtracktop.cpp
@@ -271,8 +271,19 @@ void FormTrackTop::dropEvent(QDropEvent* event)
             }
             else
             {
-                 // 如果井名不正确，不接受拖拽事件
-                 event->ignore();
+                if(strType=="wellItem")//井次名称对应多井,统一处理
+                {
+                    //拖拽井次，生成多井
+                    emit CallManage::getInstance()->sig_AddMultiWell(m_strUuid, strSlfName, strWellName);
+                    // 接受拖拽事件
+                    event->setDropAction(Qt::MoveAction);
+                    event->accept();
+                }
+                else
+                {
+                    // 如果井名不正确，不接受拖拽事件
+                    event->ignore();
+                }
             }
         }
         else
diff --git a/logPlus/formwell.cpp b/logPlus/formwell.cpp
index 42917f4..d22b177 100644
--- a/logPlus/formwell.cpp
+++ b/logPlus/formwell.cpp
@@ -304,6 +304,8 @@ QVector<QWidget *> FormWell::new_track(QStringList listdt, QString strTrackName)
             formDraw->m_iScale = m_iScale;
 			formDraw->m_nTrackW = dW;
 			formDraw->m_nObjDrawH = m_nObjDrawH;
+            //多井的打开工程，使用模板的井名和slf名
+            formDraw->m_bMultiProject = m_bMultiProject;
 
             ui->tableWidget->setCellWidget(i, columnCount, formDraw);//默认用formDraw填充满
         }
@@ -587,14 +589,19 @@ void FormWell::slot_NewTrack_No_Line(QString strUuid, QJsonObject topObj, QJsonO
 {
     QString strWellName=g_strWellName;
     QString strTrackName="";
-//    if (topObj.contains("WellName"))
-//    {
-//        QJsonValue value = topObj.value("WellName");
-//        if (value.isString()) {
-//            strWellName = value.toString();
-//            qDebug() << "WellName:" << strWellName;
-//        }
-//    }
+    //多井的打开工程，使用模板的井名和slf名
+    if(m_bMultiProject)
+    {
+        if (topObj.contains("WellName"))
+        {
+            QJsonValue value = topObj.value("WellName");
+            if (value.isString()) {
+                strWellName = value.toString();
+                qDebug() << "WellName:" << strWellName;
+            }
+        }
+    }
+
     if (topObj.contains("TrackName"))
     {
         QJsonValue value = topObj.value("TrackName");
diff --git a/logPlus/formwell.h b/logPlus/formwell.h
index 7125b51..db4ac12 100644
--- a/logPlus/formwell.h
+++ b/logPlus/formwell.h
@@ -66,6 +66,7 @@ public:
     double m_iY2=0;
     QWidget *m_parent;
     bool m_bShowTrackHead = true; //显示道头
+    bool m_bMultiProject = false; //多井的打开工程，使用模板的井名和slf名
 
 	// 道图形
 	QMap<QString, QVector<QWidget*>>	m_mapFormDraw;
diff --git a/logPlus/mainwindow.cpp b/logPlus/mainwindow.cpp
index ccd78fc..99c06b0 100644
--- a/logPlus/mainwindow.cpp
+++ b/logPlus/mainwindow.cpp
@@ -122,7 +122,7 @@ MainWindow::MainWindow(QWidget *parent) :
     //向左侧树图，刷新新加对象
     connect(CallGlobalManage::getInstance(), SIGNAL(sig_AppendConsole(Priority, const QString)), this, SLOT(s_AppendConsole(Priority, const QString)));
     //加载视图(重新打开)
-    connect(CallManage::getInstance(), SIGNAL(sig_ReOpen(QString, QString)), this, SLOT(s_ReOpen(QString, QString)));
+    connect(CallManage::getInstance(), SIGNAL(sig_ReOpen(QString, QString, bool)), this, SLOT(s_ReOpen(QString, QString, bool)));
 
     ConvertorManager::GetInstance().LoadAllConvertorPlugin();
     QTimer::singleShot(100, this, [=]() {
@@ -608,13 +608,15 @@ void MainWindow::s_PluginMsg(QString msg)
 }
 
 //加载视图(重新打开)
-void MainWindow::s_ReOpen(QString fileFull, QString fileName)
+void MainWindow::s_ReOpen(QString fileFull, QString fileName, bool bMultiProject)
 {
     MainWindowSplitter* mainSplitter = new MainWindowSplitter();
     mainSplitter->setSplitterWidget(m_projectWidgets);
     m_centerWidgets->addTab(mainSplitter, fileName);
 
     MainWindowCurve *mainWindowCurve = mainSplitter->getMainWindowCurve();
+    //多井的打开工程，使用模板的井名和slf名
+    mainWindowCurve->m_bMultiProject = bMultiProject;
     mainWindowCurve->Open(fileFull);
 }
 
diff --git a/logPlus/mainwindow.h b/logPlus/mainwindow.h
index 6e89f2e..3ea6e94 100644
--- a/logPlus/mainwindow.h
+++ b/logPlus/mainwindow.h
@@ -87,7 +87,7 @@ public slots:
     void s_DrawLine();
 
     //加载视图(重新打开)
-    void s_ReOpen(QString fileFull, QString fileName);
+    void s_ReOpen(QString fileFull, QString fileName, bool bMultiProject);
     //可视解释
     void s_showView();
     //开发工具
diff --git a/logPlus/mainwindowcurve.cpp b/logPlus/mainwindowcurve.cpp
index 3e7ed17..773b944 100644
--- a/logPlus/mainwindowcurve.cpp
+++ b/logPlus/mainwindowcurve.cpp
@@ -188,6 +188,8 @@ MainWindowCurve::MainWindowCurve(QWidget *parent) :
     //重新设置滚动条范围(头)
     connect(CallManage::getInstance(), SIGNAL(sig_setRangeVScrollBar2(QString)), this, SLOT(s_setRangeVScrollBar2(QString)));
 
+    connect(CallManage::getInstance(), SIGNAL(sig_AddMultiWell(QString, QString, QString)), this, SLOT(s_AddMultiWell(QString, QString, QString)));
+
     //图头----------
     m_dock1=new QDockWidget(tr(""),this);
     m_dock1->setFeatures(QDockWidget::NoDockWidgetFeatures);//QDockWidget::DockWidgetMovable
@@ -640,11 +642,14 @@ void MainWindowCurve::initMainToolBar()
 
     QIcon selectWellIcon(::GetImagePath()+"icon/SelectWells.png");
     QIcon fixwellsectionHeaderIcon(::GetImagePath()+"icon/fixwellsectionHeader.png");
+    QIcon templateIcon(::GetImagePath()+"WellInterp/导出模板.png");
     QIcon opentemplateIcon(::GetImagePath()+"icon/currtemplite.png");
     QIcon saveastemplateIcon(::GetImagePath()+"icon/SaveAsTemplate.png");
+    QIcon openMultiProjIcon(::GetImagePath()+"WellInterp/打开.png");  //多井的打开工程，使用模板的井名和slf名
     QIcon executeDepthShiftIcon(::GetImagePath()+"icon/ExecuteDepthShift.png");
     QIcon joindepthIcon(::GetImagePath()+"icon/joindepth.png");
     QIcon ModuleOpenIcon(::GetImagePath()+"icon/ModuleOne.png");
+    QIcon printIcon(::GetImagePath()+"WellInterp/导出图片.png");
     QIcon SaveAsPictureIcon(::GetImagePath()+"icon/SaveAsPicture.png");
     QIcon SaveAsPdfIcon(::GetImagePath()+"icon/ExportPDF.png");
     QIcon SaveAsSvgIcon(::GetImagePath()+"icon/ExportSVG.png");
@@ -652,15 +657,18 @@ void MainWindowCurve::initMainToolBar()
     QIcon crossIcon(::GetImagePath()+"icon/Cross.png");
     QIcon autorollIcon(::GetImagePath()+"icon/autoroll.png");
     QIcon blackIcon(::GetImagePath()+"icon/black.png");
+    QIcon zoomIcon(::GetImagePath()+"icon/Scale.png");
     QIcon zoominIcon(::GetImagePath()+"icon/zoomin.png");
     QIcon zoomoutIcon(::GetImagePath()+"icon/zoomout.png");
     QIcon wellTopAlignIcon(::GetImagePath()+"WellInterp/井顶对齐.png");
+    QIcon wellsSpaceIcon(::GetImagePath()+"WellInterp/井间距离.png");
 
     //Main工具栏
     m_selectWellAc = new QAction(selectWellIcon, "设置井", this);
     m_fixwellsectionHeaderAc = new QAction(fixwellsectionHeaderIcon, "锁头", this);
     m_opentemplateAc = new QAction(opentemplateIcon, "加载图文件", this);
     m_saveastemplateAc = new QAction(saveastemplateIcon, "另存为图文件", this);
+    m_openMultiProjAc = new QAction(openMultiProjIcon, "打开工程", this);   //多井的打开工程，使用模板的井名和slf名
     m_zoominAc = new QAction(zoominIcon, "放大", this);
     m_zoomoutAc = new QAction(zoomoutIcon, "缩小", this);
     m_SaveAsPictureAc = new QAction(SaveAsPictureIcon, "导出长图", this);
@@ -674,23 +682,57 @@ void MainWindowCurve::initMainToolBar()
     m_autorollAc = new QAction(autorollIcon, "图像自滚", this);
     m_PreviewPrintAc = new QAction(blackIcon, "预览图", this);
     m_wellTopAlignAc = new QAction(wellTopAlignIcon, "井顶对齐", this);
+    m_wellsSpaceAc = new QAction(wellsSpaceIcon, "井间距", this);
     m_ModuleOpenAc = new QAction(ModuleOpenIcon, "处理方法", this);
 
     ui->mainToolBar->setToolButtonStyle(Qt::ToolButtonTextBesideIcon); //此种方式为文字显示在图标右侧
 
+    // 缩放
+    QAction* zoomMenuAction = new QAction(zoomIcon, "缩放", this);
+    // 创建下拉菜单
+    QMenu* menuZoom = new QMenu(this);
+    menuZoom->addAction(m_zoominAc);                 //放大
+    menuZoom->addAction(m_zoomoutAc);                //缩小
+    zoomMenuAction->setMenu(menuZoom);
+
+    // 导出成果图
+    QAction* printMenuAction = new QAction(printIcon, "导出成果图", this);
+    // 创建下拉菜单
+    QMenu* menuPrint = new QMenu(this);
+    menuPrint->addAction(m_SaveAsPictureAc);          //导出长图
+    menuPrint->addAction(m_SaveAsPdfAc);              //导出PDF
+    menuPrint->addAction(m_SaveAsSvgAc);              //导出SVG
+    printMenuAction->setMenu(menuPrint);
+
+
+    // 图文件
+    QAction* templateAction = new QAction(templateIcon, "图文件", this);
+    // 创建下拉菜单
+    QMenu* menuTemplate = new QMenu(this);
+    menuTemplate->addAction(m_opentemplateAc);           //加载图文件
+    menuTemplate->addAction(m_saveastemplateAc);         //另存为图文件
+    menuTemplate->addAction(m_openMultiProjAc);          //多井的打开工程，使用模板的井名和slf名
+    templateAction->setMenu(menuTemplate);
+
     //add QAction to Widget.
     ui->mainToolBar->addAction(m_selectWellAc);
     ui->mainToolBar->addAction(m_fixwellsectionHeaderAc);   //锁头
-    ui->mainToolBar->addAction(m_opentemplateAc);           //加载图文件
-    ui->mainToolBar->addAction(m_saveastemplateAc);         //另存为图文件
+    ui->mainToolBar->addAction(templateAction);               //图文件菜单
+//    ui->mainToolBar->addAction(m_opentemplateAc);           //加载图文件
+//    ui->mainToolBar->addAction(m_saveastemplateAc);         //另存为图文件
     ui->mainToolBar->addSeparator();
-    ui->mainToolBar->addAction(m_zoominAc);                 //放大
-    ui->mainToolBar->addAction(m_zoomoutAc);                //缩小
-    ui->mainToolBar->addAction(m_SaveAsPictureAc);          //导出长图
-    ui->mainToolBar->addAction(m_SaveAsPdfAc);              //导出PDF
-    ui->mainToolBar->addAction(m_SaveAsSvgAc);              //导出SVG
+
+    ui->mainToolBar->addAction(zoomMenuAction);               //缩放菜单
+//    ui->mainToolBar->addAction(m_zoominAc);                 //放大
+//    ui->mainToolBar->addAction(m_zoomoutAc);                //缩小
+
+    ui->mainToolBar->addAction(printMenuAction);              //导出成果图菜单
+//    ui->mainToolBar->addAction(m_SaveAsPictureAc);          //导出长图
+//    ui->mainToolBar->addAction(m_SaveAsPdfAc);              //导出PDF
+//    ui->mainToolBar->addAction(m_SaveAsSvgAc);              //导出SVG
     ui->mainToolBar->addSeparator();
 	ui->mainToolBar->addAction(m_ModuleOpenAc);             //处理方法
+
     ui->mainToolBar->addAction(m_blackAc);                  //黑白图
     ui->mainToolBar->addAction(m_doubleHeadAc);             //单曲线头
     ui->mainToolBar->addAction(m_executeDepthShiftAc);      //校深
@@ -701,7 +743,7 @@ void MainWindowCurve::initMainToolBar()
     ui->mainToolBar->addSeparator();
     //
     ui->mainToolBar->addAction(m_wellTopAlignAc);           //井顶对齐
-    
+    ui->mainToolBar->addAction(m_wellsSpaceAc);             //井间距
 
     // 设置为可选中
     m_fixwellsectionHeaderAc->setCheckable(true);   //锁头
@@ -718,6 +760,7 @@ void MainWindowCurve::initMainToolBar()
     connect(m_fixwellsectionHeaderAc, &QAction::triggered, this, &MainWindowCurve::s_showHeadTable);
     connect(m_opentemplateAc, &QAction::triggered, this, &MainWindowCurve::s_Open);
     connect(m_saveastemplateAc, &QAction::triggered, this, &MainWindowCurve::s_Save);
+    connect(m_openMultiProjAc, &QAction::triggered, this, &MainWindowCurve::s_OpenMultiProj);
 
     connect(m_zoominAc, &QAction::triggered, this, &MainWindowCurve::s_ZoomIn);
     connect(m_zoomoutAc, &QAction::triggered, this, &MainWindowCurve::s_ZoomOut);
@@ -733,6 +776,7 @@ void MainWindowCurve::initMainToolBar()
     connect(m_autorollAc, &QAction::triggered, this, &MainWindowCurve::s_Autoroll);
     connect(m_PreviewPrintAc, &QAction::triggered, this, &MainWindowCurve::s_PreviewPrint);
     connect(m_wellTopAlignAc, &QAction::triggered, this, &MainWindowCurve::s_wellTopAlign);
+    connect(m_wellsSpaceAc, &QAction::triggered, this, &MainWindowCurve::s_wellsSpace);
     connect(m_ModuleOpenAc, &QAction::triggered, this, &MainWindowCurve::s_ModuleOpen);
 
     connect(CallManage::getInstance(), SIGNAL(sig_SaveAsPicture()), this, SLOT(s_SaveAsPicture()));
@@ -2941,7 +2985,10 @@ void MainWindowCurve::loadStyle(const QString &qssFile)
 }
 
 void MainWindowCurve::s_Open()
-{
+{    
+    //多井的打开工程，使用模板的井名和slf名
+    m_bMultiProject = false;
+
     //---------------------------------
     //左侧树图选中井次
     //针对“加载图文件”，支持井或井次
@@ -2987,7 +3034,7 @@ void MainWindowCurve::s_Open()
 
     QFileInfo fileInfo(fileFull);
     QString fileName = fileInfo.fileName(); // 获取文件名
-    emit CallManage::getInstance()->sig_tabCloseCurrent(fileFull, fileName);
+    emit CallManage::getInstance()->sig_tabCloseCurrent(fileFull, fileName, m_bMultiProject);
 
 //    //先清空
 //    ui->tableWidget_2->clear();
@@ -3002,7 +3049,6 @@ void MainWindowCurve::s_Open()
 
 void MainWindowCurve::s_Save()
 {
-
     //Logdata
     QString folderPath;
     folderPath = GetLogdataPath();
@@ -3021,6 +3067,8 @@ void MainWindowCurve::s_Save()
             file.write(doc.toJson(QJsonDocument::Indented));
             file.close();
             qDebug() << "JSON文件写入成功！";
+            //
+            m_fileJson = exPortPath;
         } else {
             qWarning() << "文件打开失败：" << file.errorString();
             return;
@@ -3028,6 +3076,34 @@ void MainWindowCurve::s_Save()
     }
 }
 
+//打开工程--多井的打开工程，使用模板的井名和slf名
+void MainWindowCurve::s_OpenMultiProj()
+{
+    //多井的打开工程，使用模板的井名和slf名
+    m_bMultiProject = true;
+
+    //Logdata
+    QString folderPath;
+    folderPath = GetLogdataPath();
+    folderPath = folderPath + g_prjname;
+    //folderPath = folderPath + "/multiwell.json";
+
+    //打开
+    QString fileFull = "";
+    fileFull = QFileDialog::getOpenFileName(this,
+                                            tr("选择模板"),
+                                            folderPath,
+                                            tr("多井图文件(*.json)"));
+    if (fileFull.isEmpty())
+    {
+        return;
+    }
+
+    QFileInfo fileInfo(fileFull);
+    QString fileName = fileInfo.fileName(); // 获取文件名
+    emit CallManage::getInstance()->sig_tabCloseCurrent(fileFull, fileName, m_bMultiProject);
+}
+
 bool MainWindowCurve::GetIsColorPrint()
 {
     return m_isColorPrint;
@@ -3129,6 +3205,36 @@ void MainWindowCurve::s_wellTopAlign()
     }
 }
 
+//井间距
+void MainWindowCurve::s_wellsSpace()
+{
+    bool ok=0;
+    QString Formtiom=QInputDialog::getText(NULL,"井位间距设置","井位等间距（mm）",QLineEdit::Normal,"",&ok);
+    if(!ok) return;
+    if(Formtiom.toFloat())
+    {
+        float dSpace=Formtiom.toFloat();//mm
+
+        int iNewWidth = static_cast<int>(dSpace/10.0 * g_dPixelPerCm);
+        //设置列宽
+        int columnCount = ui->tableWidget_2->columnCount();//总列数
+        for(int i=0; i<columnCount; i++)
+        {
+            if(i%2==0)
+            {
+                continue;
+            }
+            else
+            {
+                //空白列
+            }
+
+            //调整井宽
+            ui->tableWidget_2->setColumnWidth(i, iNewWidth);
+        }
+    }
+}
+
 //预览图
 void MainWindowCurve::s_PreviewPrint()
 {
@@ -4269,6 +4375,8 @@ void MainWindowCurve::s_NewWell(QString strWellName, QString strSlfName, bool bS
             widgetWell->setWellHeader(wellH);
             //显示道头
             widgetWell->m_bShowTrackHead = bShowTrackHead;
+            //多井的打开工程，使用模板的井名和slf名
+            widgetWell->m_bMultiProject = m_bMultiProject;
             //
             ui->tableWidget_2->setCellWidget(i, columnCount, widgetWell);//默认用widgetWell填充满
 			m_mapFWell.insert(strWellName, widgetWell);
@@ -5165,6 +5273,11 @@ void MainWindowCurve::dropEvent(QDropEvent* event)
                 //新建井+道+曲线(首条)
                 NewWellAndTrack(strWellName, strSlfName, strLineName, strType);
             }
+            else if(strType=="wellItem")//井次名称对应多井,统一处理
+            {
+                //拖拽井次，生成多井
+                emit CallManage::getInstance()->sig_AddMultiWell(m_strUuid, strSlfName, strWellName);
+            }
         }
 
         //QMessageBox::information(this, "提示", strExtern);
@@ -5195,6 +5308,9 @@ void MainWindowCurve::Open(QString fileFull)
     QFile file(fileFull);
     if(file.open(QIODevice::ReadOnly))
     {
+        //
+        m_fileJson = fileFull;
+
         // 解析JSON
         QJsonDocument document = QJsonDocument::fromJson(file.readAll(), &jsonError);
         if (!document.isNull() && (jsonError.error == QJsonParseError::NoError))
@@ -5312,6 +5428,62 @@ void MainWindowCurve::Open(QString fileFull)
     }
 }
 
+void MainWindowCurve::OpenMultiWell(QString fileFull)
+{
+    QString strPrjname = "";
+    QJsonArray wellsArray;
+
+    QJsonParseError jsonError;
+    // 文件
+    QFile file(fileFull);
+    if(file.open(QIODevice::ReadOnly))
+    {
+        // 解析JSON
+        QJsonDocument document = QJsonDocument::fromJson(file.readAll(), &jsonError);
+        if (!document.isNull() && (jsonError.error == QJsonParseError::NoError))
+        {
+            if (document.isObject())
+            {
+                QJsonObject object = document.object();
+                //
+                if (object.contains("wells"))
+                {
+                    QJsonValue value = object.value("wells");
+                    if (value.isArray()) {
+                        wellsArray = value.toArray();
+                        qDebug() << "wellsArray number:" << QString::number(wellsArray.size());
+
+                        //是否正在加载json
+                        g_iLoadingJson = 1;
+                        //展示所有井
+                        DisplayWells(wellsArray);
+                        g_iLoadingJson = 0;
+
+                        //统一处理头部滚动条
+                        s_setRangeVScrollBar2(m_strUuid);
+                    }
+                }
+            }
+        }
+
+        //
+        file.close();
+        qDebug() << "JSON 模板文件读取成功！";
+
+        //重置右侧滚动条
+//        ui->verticalScrollBar->setRange(-m_iY2*100, -m_iY1*100);
+//        ui->verticalScrollBar->setValue(-m_iY2*100);
+        vertScrollBarChanged(-m_iY2*100);
+
+        QMessageBox::information(NULL,"提示","模板加载完成！",QMessageBox::Ok);
+        emit sig_resizeWindow();
+
+    } else {
+        qWarning() << "JSON 模板文件打开失败：" << file.errorString();
+        QMessageBox::information(NULL,"提示","模板加载失败！",QMessageBox::Ok);
+    }
+}
+
 //改变道宽
 void MainWindowCurve::s_changeWidth(QString strUuid, QString strSlfName, QString strWellName, QString strTrackName, int iCurrentCol, int iNewWidth)
 {
@@ -5728,8 +5900,14 @@ void MainWindowCurve::DisplayWells(QJsonArray wellsArray)
     int iCount = wellsArray.size();
     if(iCount>1)
     {
-        int flag = QMessageBox::warning(NULL,"提示",QString("图文件或模板中存在多个井文件,\n是否用当前选中井替换原井文件？"),QMessageBox::Yes,QMessageBox::No);
-        if(flag!=QMessageBox::Yes) return;
+        //多井的打开工程，使用模板的井名和slf名
+        if(m_bMultiProject)
+        {
+        }
+        else{
+            int flag = QMessageBox::warning(NULL,"提示",QString("图文件或模板中存在多个井文件,\n是否用当前选中井替换原井文件？"),QMessageBox::Yes,QMessageBox::No);
+            if(flag!=QMessageBox::Yes) return;
+        }
     }
     for(int i=0; i<iCount; i++)
     {
@@ -5777,23 +5955,31 @@ void MainWindowCurve::DisplayWell_One(QJsonObject wellObjInfo)
     QString strSlfName = g_strSlfName;
     QJsonArray tracksArray;
 
-//    if (wellObjInfo.contains("WellName"))
-//    {
-//        QJsonValue value = wellObjInfo.value("WellName");
-//        if (value.isString()) {
-//            strWellName = value.toString();
-//            qDebug() << "WellName:" << strWellName;
-//        }
-//    }
+    //多井的打开工程，使用模板的井名和slf名
+    if(m_bMultiProject)
+    {
+        if (wellObjInfo.contains("WellName"))
+        {
+            QJsonValue value = wellObjInfo.value("WellName");
+            if (value.isString()) {
+                strWellName = value.toString();
+                qDebug() << "WellName:" << strWellName;
+            }
+        }
 
-//    if (wellObjInfo.contains("SlfName"))
-//    {
-//        QJsonValue value = wellObjInfo.value("SlfName");
-//        if (value.isString()) {
-//            strSlfName = value.toString();
-//            qDebug() << "strSlfName:" << strSlfName;
-//        }
-//    }
+        if (wellObjInfo.contains("SlfName"))
+        {
+            QJsonValue value = wellObjInfo.value("SlfName");
+            if (value.isString()) {
+                strSlfName = value.toString();
+                qDebug() << "strSlfName:" << strSlfName;
+            }
+        }
+        //新建井
+        QString folderPath = GetLogdataPath();
+        folderPath = folderPath + g_prjname;
+        strSlfName = folderPath + "/" + "#" + strWellName + "/" + strSlfName;
+    }
 
     if (wellObjInfo.contains("bShowTrackHead"))
     {
@@ -5803,10 +5989,6 @@ void MainWindowCurve::DisplayWell_One(QJsonObject wellObjInfo)
         }
     }
 
-    //新建井
-//    QString folderPath = GetLogdataPath();
-//    folderPath = folderPath + g_prjname;
-//    strSlfName = folderPath + "/" + "#" + strWellName + "/" + strSlfName;
     s_NewWell(strWellName, strSlfName, m_bShowTrackHead);
 
     //
@@ -5893,14 +6075,19 @@ void MainWindowCurve::DisplayTrack_Top(int id, QJsonObject trackTop, QJsonObject
     //if(id>0)
     {
         QString strWellName = g_strWellName;
-//        if (trackTop.contains("WellName"))
-//        {
-//            QJsonValue value = trackTop.value("WellName");
-//            if (value.isString()) {
-//                strWellName = value.toString();
-//                qDebug() << "WellName:" << strWellName;
-//            }
-//        }
+        //多井的打开工程，使用模板的井名和slf名
+        if(m_bMultiProject)
+        {
+            if (trackTop.contains("WellName"))
+            {
+                QJsonValue value = trackTop.value("WellName");
+                if (value.isString()) {
+                    strWellName = value.toString();
+                    qDebug() << "WellName:" << strWellName;
+                }
+            }
+        }
+
         double nW = 0;
         if (trackTop.contains("TrackW"))
         {
@@ -6486,3 +6673,24 @@ void MainWindowCurve::onSectionResized(int logicalIndex, int oldSize, int newSiz
     //居中
     emit sig_resizeWindow();
 }
+
+//拖拽井次，生成多井
+void MainWindowCurve::s_AddMultiWell(QString strUuid, QString strSlfName, QString strWellName)
+{
+    if(strUuid != m_strUuid)
+    {
+        return;
+    }
+    if(m_fileJson=="")
+    {
+        return;
+    }
+
+    g_strSlfName = strSlfName;
+    g_strWellName = strWellName;
+    //多井的打开工程，使用模板的井名和slf名
+    m_bMultiProject = false;
+
+    //
+    OpenMultiWell(m_fileJson);
+}
diff --git a/logPlus/mainwindowcurve.h b/logPlus/mainwindowcurve.h
index b62892b..8cd14c4 100644
--- a/logPlus/mainwindowcurve.h
+++ b/logPlus/mainwindowcurve.h
@@ -142,7 +142,10 @@ public:
     void DisplayTrack_Top(int id, QJsonObject trackTop, QJsonObject trackInfo);
 
     void Open(QString fileFull);//打开
+    void OpenMultiWell(QString fileFull);//打开
+    QString m_fileJson="";
 
+    bool m_bMultiProject = false; //多井的打开工程，使用模板的井名和slf名
 public:
     //样式
     void loadStyle(const QString &qssFile);
@@ -231,11 +234,15 @@ public slots:
     //列宽改变
     void onSectionResized(int logicalIndex, int oldSize, int newSize);
 
+    //拖拽井次，生成多井
+    void s_AddMultiWell(QString strUuid, QString strSlfName, QString strWellName);
+
 public:
     QAction* m_selectWellAc = nullptr;              //选择井
     QAction* m_fixwellsectionHeaderAc = nullptr;	//锁头
     QAction* m_opentemplateAc = nullptr;            //加载图文件
     QAction* m_saveastemplateAc = nullptr;          //另存为图文件
+    QAction* m_openMultiProjAc = nullptr;           //多井的打开工程，使用模板的井名和slf名
     QAction* m_zoominAc = nullptr;                  //放大
     QAction* m_zoomoutAc = nullptr;                 //缩小
     QAction* m_SaveAsPictureAc = nullptr;           //导出长图
@@ -249,6 +256,7 @@ public:
     QAction* m_autorollAc = nullptr;                //图像自滚
     QAction* m_PreviewPrintAc = nullptr;            //预览图
     QAction* m_wellTopAlignAc = nullptr;            //井顶对齐
+    QAction* m_wellsSpaceAc = nullptr;              //井间距
     QAction* m_ModuleOpenAc = nullptr;              //处理方法
 
 public slots:
@@ -329,6 +337,7 @@ public slots:
     void s_showHeadTable();     //显示/隐藏图头
     void s_Open();              //加载图文件
     void s_Save();              //保存图文件
+    void s_OpenMultiProj();     //打开工程--多井的打开工程，使用模板的井名和slf名
     void s_SaveAsPicture();     //导出长图
     void s_SaveAsPdf();         //导出PDF
     void s_SaveAsSvg();         //导出SVG
@@ -342,6 +351,7 @@ public slots:
     void s_Autoroll();          //图像自滚
     void s_PreviewPrint();      //预览图
     void s_wellTopAlign();      //井顶对齐
+    void s_wellsSpace();        //井间距
     void s_ModuleOpen();        //处理算法
     //
     void _slotExport(QPrinter &printer, int IsBmp, QString pngName, QString strTmpName);
diff --git a/logPlus/preqtablewidget.cpp b/logPlus/preqtablewidget.cpp
index 3674132..4fc8bef 100644
--- a/logPlus/preqtablewidget.cpp
+++ b/logPlus/preqtablewidget.cpp
@@ -377,8 +377,19 @@ void PreQTableWidget::dropEvent(QDropEvent *event)
             }
             else
             {
-                // 如果井名不正确，不接受拖拽事件
-                event->ignore();
+                if(strType=="wellItem")//井次名称对应多井,统一处理
+                {
+                    //拖拽井次，生成多井
+                    emit CallManage::getInstance()->sig_AddMultiWell(m_strUuid, strSlfName, strWellName);
+                    // 接受拖拽事件
+                    event->setDropAction(Qt::MoveAction);
+                    event->accept();
+                }
+                else
+                {
+                    // 如果井名不正确，不接受拖拽事件
+                    event->ignore();
+                }
             }
         }
     }
diff --git a/logPlus/qmytreewidget.cpp b/logPlus/qmytreewidget.cpp
index 310d8cd..f96d60e 100644
--- a/logPlus/qmytreewidget.cpp
+++ b/logPlus/qmytreewidget.cpp
@@ -145,11 +145,16 @@ void QMyTreeWidget::startDrag(Qt::DropActions supportedActions)
     {
         //根节点(项目名称)
     }
-    else if (strTreeTag == "curveObject" || strTreeTag == "waveObject" || strTreeTag == "tableObject"){
+    else if (strTreeTag == "curveObject" || strTreeTag == "waveObject" || strTreeTag == "tableObject" ||
+             strTreeTag == "wellItem")//井次名称对应多井,统一处理
+    {
         //曲线
         QString strSlfName = item->data(0, Qt::UserRole+1).toString();
         QString strWellName = item->data(0, Qt::UserRole+2).toString();
-
+        if (strTreeTag == "wellItem")//井次名称
+        {
+            strWellName = item->text(0);
+        }
         //曲线对象(AC、BS...)
         QMimeData *mimeData = new QMimeData;
         // 这里需要根据你的item数据来设置mimeData，例如：