diff --git a/logPlus/PropertyWidget.cpp b/logPlus/PropertyWidget.cpp
index a7f5e03..9116f8b 100644
--- a/logPlus/PropertyWidget.cpp
+++ b/logPlus/PropertyWidget.cpp
@@ -2692,7 +2692,7 @@ void PropertyWidget::initProperty(FormInfo *formInfo)
             //固井结论
             this->initGujingProperty(formInfo);
         }
-        if (m_strLineName == "IMAGE_DATA")
+        else if (m_strLineName == "IMAGE_DATA")
         {
             // 岩心图片
             this->initImageProperty(formInfo);
diff --git a/logPlus/formdraw.cpp b/logPlus/formdraw.cpp
index dde1166..84a063a 100644
--- a/logPlus/formdraw.cpp
+++ b/logPlus/formdraw.cpp
@@ -12,6 +12,7 @@
 #include "PickFrac.h"
 #include "DrawNrad.h"
 #include "formline.h"
+#include "PropertyWidget.h"
 
 //以下参数从配置文件读取
 extern int g_iIndex;
@@ -2056,6 +2057,15 @@ void FormDraw::DisplayLine_One(QJsonObject lineObjInfo)
             bDrawSymmetry = value.toBool();
         }
     }
+    //
+    QCPScatterStyle::ScatterShape pointStyle=QCPScatterStyle::ssCircle;//数据点，符号类型，圆，三角等
+    if (lineObjInfo.contains("pointStyle"))
+    {
+        QJsonValue value = lineObjInfo.value("pointStyle");
+        if (value.isDouble()) {
+            pointStyle = (QCPScatterStyle::ScatterShape)value.toInt();
+        }
+    }
 
     QString folderPath = GetLogdataPath();
     folderPath = folderPath + g_prjname;
@@ -2099,6 +2109,8 @@ void FormDraw::DisplayLine_One(QJsonObject lineObjInfo)
         else{
             listOtherProperty.append("0");
         }
+        //
+        listOtherProperty.append(QString::number(pointStyle));
 
         //新建曲线
         s_AddLine_Property(m_strUuid, strSlfName, strWellName, m_strTrackName, strLineName,
@@ -2794,6 +2806,12 @@ void FormDraw::s_delLine(QString strUuid, QString strWellName, QString strTrackN
                 {
                     childWidget->deleteLater(); // 安排控件的删除，稍后执行
                     m_listLineName.removeOne(strLineName);
+
+                    //属性清空
+                    PropertyService()->InitCurrentViewInfo();
+
+                    //取消所有选中单元格
+                    emit CallManage::getInstance()->sig_Raise(m_strUuid, "", "", "", "", 0, "");
                     //break;
                 }
             }
@@ -2840,6 +2858,12 @@ void FormDraw::s_delWave(QString strUuid, QString strWellName, QString strTrackN
                 {
                     childWidget->deleteLater(); // 安排控件的删除，稍后执行
                     m_listWaveName.removeOne(strLineName);
+
+                    //属性清空
+                    PropertyService()->InitCurrentViewInfo();
+
+                    //取消所有选中单元格
+                    emit CallManage::getInstance()->sig_Raise(m_strUuid, "", "", "", "", 0, "");
                     //break;
                 }
             }
@@ -2885,6 +2909,12 @@ void FormDraw::s_delTableLine(QString strUuid, QString strWellName, QString strT
                 {
                     childWidget->deleteLater(); // 安排控件的删除，稍后执行
                     m_listTableName.removeOne(strLineName);
+
+                    //属性清空
+                    PropertyService()->InitCurrentViewInfo();
+
+                    //取消所有选中单元格
+                    emit CallManage::getInstance()->sig_Raise(m_strUuid, "", "", "", "", 0, "");
                     //break;
                 }
             }
@@ -4184,7 +4214,9 @@ void FormDraw::initForm(QMyCustomPlot *widget, QString strSlfName, QString strLi
     bool bDrawGan = false;    // 杆状
     bool bDrawPoint = false;  // 点状
     bool bDrawSymmetry = false; // 绘制对称曲线
-    if(listOtherProperty.size()>=7)
+    QCPScatterStyle::ScatterShape pointStyle=QCPScatterStyle::ssCircle;//数据点，符号类型，圆，三角等
+
+    if(listOtherProperty.size()>=8)
     {
         if(listOtherProperty[3]=="DrawLine")
         {
@@ -4221,6 +4253,8 @@ void FormDraw::initForm(QMyCustomPlot *widget, QString strSlfName, QString strLi
         {
             bDrawSymmetry = false;
         }
+        //
+        pointStyle = (QCPScatterStyle::ScatterShape)listOtherProperty[7].toInt();
     }
 
     //最大值，最小值
@@ -4321,6 +4355,7 @@ void FormDraw::initForm(QMyCustomPlot *widget, QString strSlfName, QString strLi
         widget->m_bDrawGan = bDrawGan;
         widget->m_bDrawPoint = bDrawPoint;
         widget->m_bDrawSymmetry = bDrawSymmetry;
+        widget->m_pointStyle = pointStyle;
 
         addRandomGraph(widget, x, y, strSlfName, strLineName, strAliasName, strUnit,
                        newLeftScale, newRightScale, strScaleType, lineColor, width, lineStyle, listOtherProperty);
@@ -7780,6 +7815,12 @@ void FormDraw::s_changeGujingLine(QString strUuid, QString strSlfName, QString s
     if(m_listLineName.contains(strLineName))
     {
         m_listLineName.removeOne(strLineName);
+
+        //属性清空
+        //PropertyService()->InitCurrentViewInfo();
+
+        //取消所有选中单元格
+        emit CallManage::getInstance()->sig_Raise(m_strUuid, "", "", "", "", 0, "");
         //qDebug() << "FormDraw strLineName already exist! " << strLineName;
         //return;
     }
@@ -7800,6 +7841,12 @@ void FormDraw::s_changeJiegutextLine(QString strUuid, QString strSlfName, QStrin
     if(m_listLineName.contains(strLineName))
     {
         m_listLineName.removeOne(strLineName);
+
+        //属性清空
+        //PropertyService()->InitCurrentViewInfo();
+
+        //取消所有选中单元格
+        emit CallManage::getInstance()->sig_Raise(m_strUuid, "", "", "", "", 0, "");
         //qDebug() << "FormDraw strLineName already exist! " << strLineName;
         //return;
     }
@@ -7820,6 +7867,12 @@ void FormDraw::s_changeLineName(QString strUuid, QString strSlfName, QString str
     if(m_listLineName.contains(strLineName))
     {
         m_listLineName.removeOne(strLineName);
+
+        //属性清空
+        //PropertyService()->InitCurrentViewInfo();
+
+        //取消所有选中单元格
+        emit CallManage::getInstance()->sig_Raise(m_strUuid, "", "", "", "", 0, "");
         //qDebug() << "FormDraw strLineName already exist! " << strLineName;
         //return;
     }
diff --git a/logPlus/forminfo.cpp b/logPlus/forminfo.cpp
index 524119e..7226aba 100644
--- a/logPlus/forminfo.cpp
+++ b/logPlus/forminfo.cpp
@@ -267,6 +267,7 @@ QJsonObject FormInfo::makeJson()
         rootObj["DrawGan"] = m_bDrawGan;            // 杆状
         rootObj["DrawPoint"] = m_bDrawPoint;        // 点状
         rootObj["DrawSymmetry"] = m_bDrawSymmetry;	// 绘制对称曲线
+        rootObj["pointStyle"] = m_pointStyle;
 
         //岩性填充
         rootObj["newFillMode"] = m_newFillMode;
diff --git a/logPlus/formtrack.cpp b/logPlus/formtrack.cpp
index e8e8ce4..e79a5a8 100644
--- a/logPlus/formtrack.cpp
+++ b/logPlus/formtrack.cpp
@@ -370,7 +370,7 @@ void FormTrack::s_addLine(QString strSlfName, QString strWellName, QString strTr
         curveNameFont.fromString(listOtherProperty[2]);
         formInfo->m_curveNameFont = curveNameFont;
     }
-    if(listOtherProperty.size()>=7)
+    if(listOtherProperty.size()>=8)
     {
         if(listOtherProperty[3]=="DrawLine")
         {
@@ -407,6 +407,11 @@ void FormTrack::s_addLine(QString strSlfName, QString strWellName, QString strTr
         {
             formInfo->m_bDrawSymmetry = false;
         }
+
+        //
+        QCPScatterStyle::ScatterShape pointStyle=QCPScatterStyle::ssCircle;//数据点，符号类型，圆，三角等
+        pointStyle = (QCPScatterStyle::ScatterShape)listOtherProperty[7].toInt();
+        formInfo->m_pointStyle = pointStyle;
     }
 
     //设置高度
diff --git a/logPlus/formwell.cpp b/logPlus/formwell.cpp
index 99b0baf..5528947 100644
--- a/logPlus/formwell.cpp
+++ b/logPlus/formwell.cpp
@@ -4,6 +4,7 @@
 #include "qtColorSchemeComboBox.h"
 #include "geometryutils.h"
 #include "mainwindowcurve.h"
+#include "PropertyWidget.h"
 
 extern int g_iOneWidth;  //道宽
 //extern int m_iY1;
@@ -77,6 +78,28 @@ int FormWell::insertColumn(int nw)
     return ncolCount;
 }
 
+//获取当前井的所有道名称
+QStringList FormWell::getTrackNameList()
+{
+    QStringList listTrackName;
+
+    int columnCount = ui->tableWidget->columnCount();//总列数
+    for(int i=0; i<columnCount; i++)
+    {
+        if( ui->tableWidget->cellWidget(0, i) != nullptr )
+        {
+            auto myWidget = ui->tableWidget->cellWidget(0, i);
+            FormTrackTop* fromTop = qobject_cast<FormTrackTop*>(myWidget);
+            if(fromTop)
+            {
+                listTrackName.append(fromTop->m_strTrackName);
+            }
+        }
+   }
+
+    return listTrackName;
+}
+
 QVector<QWidget *> FormWell::new_track(QStringList listdt, QString strTrackName)
 {
     QVector<QWidget *> vec;
@@ -101,8 +124,9 @@ QVector<QWidget *> FormWell::new_track(QStringList listdt, QString strTrackName)
 
     if(strTrackName.length() <= 0)
     {
-        //道名
-        strTrackName = "道" + QString::number(columnCount+1);
+        //获取当前井的所有道名称
+        QStringList listTrackName = getTrackNameList();
+        //
         if(strType == "depthObject")
             strTrackName = "深度";
         else if(strType == "roseObject")
@@ -111,6 +135,42 @@ QVector<QWidget *> FormWell::new_track(QStringList listdt, QString strTrackName)
             strTrackName = "DCA检测";
         else if(strType == "tdtObject")
             strTrackName = "TDT";
+        else{
+            strTrackName = "道" + QString::number(columnCount+1);
+        }
+        //
+        if(listTrackName.size()>0)
+        {
+            if(listTrackName.contains(strTrackName))//道名已经存在，避免道重名
+            {
+                //道名
+                for(int i=2; i<100; i++)
+                {
+                    //
+                    if(strType == "depthObject")
+                        strTrackName = "深度" + QString::number(columnCount+i);
+                    else if(strType == "roseObject")
+                        strTrackName = "玫瑰图" + QString::number(columnCount+i);
+                    else if(strType == "dcaObject")
+                        strTrackName = "DCA检测" + QString::number(columnCount+i);
+                    else if(strType == "tdtObject")
+                        strTrackName = "TDT" + QString::number(columnCount+i);
+                    else{
+                        strTrackName = "道" + QString::number(columnCount+i);
+                    }
+
+                    //
+                    if(listTrackName.contains(strTrackName))
+                    {
+                        continue;
+                    }
+                    else
+                    {
+                        break;
+                    }
+                }
+            }
+        }
     }
 
     FormTrack *formTrack = nullptr;
@@ -640,7 +700,14 @@ void FormWell::slotDeleteSelectTrack()
     if(iCurrentRow == 0)
     {
         ui->tableWidget->removeColumn(iCurrentCol);
+
         resizeWindow();
+
+        //属性清空
+        PropertyService()->InitCurrentViewInfo();
+
+        //取消所有选中单元格
+        emit CallManage::getInstance()->sig_Raise(m_strUuid, "", "", "", "", 0, "");
     }
 }
 
diff --git a/logPlus/formwell.h b/logPlus/formwell.h
index 1288543..2f577d7 100644
--- a/logPlus/formwell.h
+++ b/logPlus/formwell.h
@@ -51,6 +51,9 @@ public:
     //设置道宽
     int setColWidth(int iCurrentCol, int iNewWidth);
 
+    //获取当前井的所有道名称
+    QStringList getTrackNameList();
+
 public slots:
 	//void onTableColumnsInserted(const QModelIndex &parent, int first, int last);
 
diff --git a/logPlus/mainwindowcurve.cpp b/logPlus/mainwindowcurve.cpp
index d3ed5af..6b63424 100644
--- a/logPlus/mainwindowcurve.cpp
+++ b/logPlus/mainwindowcurve.cpp
@@ -197,7 +197,7 @@ void MainWindowCurve::initMainToolBar()
     QIcon executeDepthShiftIcon(::GetImagePath()+"icon/ExecuteDepthShift.png");
     QIcon joindepthIcon(::GetImagePath()+"icon/joindepth.png");
     QIcon ModuleOpenIcon(::GetImagePath()+"icon/ModuleOne.png");
-    QIcon openFileIcon(":/image/open.png");
+    QIcon SaveAsPictureIcon(::GetImagePath()+"icon/SaveAsPicture.png");
     QIcon runIcon(":/image/capacity.png");
     QIcon debugIcon(":/image/anaysis.png");
     QIcon loadIcon(":/image/export.png");
@@ -210,7 +210,7 @@ void MainWindowCurve::initMainToolBar()
     QAction* m_executeDepthShiftAc = nullptr;       //校深
     QAction* m_joindepthAc = nullptr;               //拼接
     QAction* m_ModuleOpenAc = nullptr;              //处理方法
-    //QAction* m_openAc = nullptr;	//打开
+    QAction* m_SaveAsPictureAc = nullptr;           //导出长图
 //    QAction* m_runAc = nullptr;//
 //    QAction* m_debugAc = nullptr;	//
 //    QAction* m_loadAc = nullptr;	//加载
@@ -222,7 +222,7 @@ void MainWindowCurve::initMainToolBar()
     m_executeDepthShiftAc = new QAction(executeDepthShiftIcon, "校深", this);
     m_joindepthAc = new QAction(joindepthIcon, "拼接", this);
     m_ModuleOpenAc = new QAction(ModuleOpenIcon, "处理方法", this);
-//    m_runAc = new QAction(runIcon, "设置井", this);
+    m_SaveAsPictureAc = new QAction(SaveAsPictureIcon, "导出长图", this);
 //    m_debugAc = new QAction(debugIcon, "撤销", this);
 //    m_loadAc = new QAction(loadIcon, "重做", this);
     //m_openAc = new QAction(openFileIcon, "打开", this);
@@ -238,7 +238,8 @@ void MainWindowCurve::initMainToolBar()
     ui->mainToolBar->addAction(m_joindepthAc);
     ui->mainToolBar->addAction(m_ModuleOpenAc);
 	
-//    ui->mainToolBar->addAction(m_runAc);
+    //ui->mainToolBar->addAction(m_SaveAsPictureAc);//导出长图
+
 //    ui->mainToolBar->addAction(m_debugAc);
 //    ui->mainToolBar->addAction(m_loadAc);
     //ui->mainToolBar->addAction(m_openAc);
@@ -251,10 +252,10 @@ void MainWindowCurve::initMainToolBar()
     connect(m_joindepthAc, &QAction::triggered, this, &MainWindowCurve::s_ExecuteMerge);
 
     connect(m_ModuleOpenAc, &QAction::triggered, this, &MainWindowCurve::s_ModuleOpen);
+    connect(m_SaveAsPictureAc, &QAction::triggered, this, &MainWindowCurve::s_SaveAsPicture);
 
 //    connect(m_grepAc, &QAction::triggered, this, &MainWindow::s_Risize);
 //    connect(m_compileAc, &QAction::triggered, this, &MainWindow::s_AddOne);
-//    connect(m_runAc, &QAction::triggered, this, &MainWindow::s_SaveImage);
 //    connect(m_debugAc, &QAction::triggered, this, &MainWindow::s_DrawImg);
 //    connect(m_loadAc, &QAction::triggered, this, &MainWindow::s_DrawLine);
     //connect(m_openAc, &QAction::triggered, this, &MainWindowCurve::s_Open);
@@ -2320,6 +2321,14 @@ void MainWindowCurve::s_ModuleOpen()
 	m_pParentWin->setModuleOpenOrClose();
 }
 
+//导出长图
+void MainWindowCurve::s_SaveAsPicture()
+{
+    //指标体系图
+    QPixmap pPixmap = ui->tableWidget_2->grab(QRect(0, 0, ui->tableWidget_2->width()*2, ui->tableWidget_2->height()*2));
+    pPixmap.save("d:\\3.png", "png");
+}
+
 //void MainWindowCurve::s_Open(QString fileFull)
 //{
 
diff --git a/logPlus/mainwindowcurve.h b/logPlus/mainwindowcurve.h
index af843ff..cc22bed 100644
--- a/logPlus/mainwindowcurve.h
+++ b/logPlus/mainwindowcurve.h
@@ -243,7 +243,7 @@ public slots:
     void s_ExecuteDepthShift(); //校深
     void s_ExecuteMerge();      //拼接
     void s_ModuleOpen();        //处理算法
-    //void s_Open(QString fileFull);//打开
+    void s_SaveAsPicture();     //导出长图
 
 };
 
diff --git a/logPlus/qtprojectwidgets.cpp b/logPlus/qtprojectwidgets.cpp
index ec93eb6..00eba14 100644
--- a/logPlus/qtprojectwidgets.cpp
+++ b/logPlus/qtprojectwidgets.cpp
@@ -625,6 +625,10 @@ void QtProjectWidgets::loadWellTree(QTreeWidgetItem *parent, QString fileFull, Q
 //初始化树形控件中的右键菜单
 void QtProjectWidgets::initMenu()
 {
+    m_action_Paste = new QAction("粘贴", ui->treeWidget);
+    m_action_Paste ->setIcon(QIcon(GetImagePath() +  "icon/Copy.png")); // 设置图标":/image/u174.png"
+    connect(m_action_Paste, SIGNAL(triggered()), this, SLOT(onPasteSelObject()));
+
     //根节点(项目名称)-右键菜单
     _menuRoot = new QMenu(ui->treeWidget);
     initRootTreeMenu(_menuRoot, ui->treeWidget);
@@ -657,6 +661,14 @@ void QtProjectWidgets::initMenu()
     _menuTableFolder = new QMenu(ui->treeWidget);
     initTableFolderTreeMenu(_menuTableFolder, ui->treeWidget);
 
+    _menuCurveFolder = new QMenu(ui->treeWidget);
+    initCurveFolderTreeMenu(_menuCurveFolder, ui->treeWidget);
+
+    _menuParCardFolder = new QMenu(ui->treeWidget);
+    initParCardFolderTreeMenu(_menuParCardFolder, ui->treeWidget);
+
+    _menuWaveFolder = new QMenu(ui->treeWidget);
+    initWaveFolderTreeMenu(_menuWaveFolder, ui->treeWidget);
 //    //评估方案-右键菜单
 //    _menuEvaluate = new QMenu(ui->treeWidget);
 //    initEvaluateTreeMenu(_menuEvaluate, ui->treeWidget);
@@ -708,6 +720,16 @@ void QtProjectWidgets::initParameterCardTreeMenu(QMenu *menu, QTreeWidget *treeW
     action_CardObject->setIcon(QIcon(GetImagePath() +  "icon/Sheet.png")); // 设置图标":/image/u174.png"
     connect(action_CardObject, SIGNAL(triggered(bool)), this, SLOT(onShowParameterCard(bool)));
     menu->addAction(action_CardObject);
+
+    QAction* action_Copy = new QAction("复制", treeWidget);
+    action_Copy->setIcon(QIcon(GetImagePath() +  "icon/Copy.png")); // 设置图标":/image/u174.png"
+    connect(action_Copy, SIGNAL(triggered()), this, SLOT(onCopySelObject()));
+    menu->addAction(action_Copy);
+
+    QAction* action_Delete = new QAction("删除", treeWidget);
+    action_Delete->setIcon(QIcon(GetImagePath() +  "icon/Delete.png")); // 设置图标":/image/u174.png"
+    connect(action_Delete, SIGNAL(triggered()), this, SLOT(onDeleteObject()));
+    menu->addAction(action_Delete);
 }
 
 //初始化曲线对象(AC、BS...)-右键菜单
@@ -722,6 +744,16 @@ void QtProjectWidgets::initCurveObjectTreeMenu(QMenu *menu, QTreeWidget *treeWid
     m_action_DepthShift->setIcon(QIcon(GetImagePath() +  "icon/RigidDepthShifting.png")); // 设置图标
     connect(m_action_DepthShift, SIGNAL(triggered(bool)), this, SLOT(onDepthShift(bool)));
     menu->addAction(m_action_DepthShift);
+
+    QAction* action_Copy = new QAction("复制", treeWidget);
+    action_Copy->setIcon(QIcon(GetImagePath() +  "icon/Copy.png")); // 设置图标":/image/u174.png"
+    connect(action_Copy, SIGNAL(triggered()), this, SLOT(onCopySelObject()));
+    menu->addAction(action_Copy);
+
+    QAction* action_Delete = new QAction("删除", treeWidget);
+    action_Delete->setIcon(QIcon(GetImagePath() +  "icon/Delete.png")); // 设置图标":/image/u174.png"
+    connect(action_Delete, SIGNAL(triggered()), this, SLOT(onDeleteObject()));
+    menu->addAction(action_Delete);
 }
 
 //初始化波列对象-右键菜单
@@ -736,6 +768,16 @@ void QtProjectWidgets::initWaveObjectTreeMenu(QMenu *menu, QTreeWidget *treeWidg
     action_DepthShift->setIcon(QIcon(GetImagePath() +  "icon/RigidDepthShifting.png")); // 设置图标
     connect(action_DepthShift, SIGNAL(triggered(bool)), this, SLOT(onDepthShift(bool)));
     menu->addAction(action_DepthShift);
+
+    QAction* action_Copy = new QAction("复制", treeWidget);
+    action_Copy->setIcon(QIcon(GetImagePath() +  "icon/Copy.png")); // 设置图标":/image/u174.png"
+    connect(action_Copy, SIGNAL(triggered()), this, SLOT(onCopySelObject()));
+    menu->addAction(action_Copy);
+
+    QAction* action_Delete = new QAction("删除", treeWidget);
+    action_Delete->setIcon(QIcon(GetImagePath() +  "icon/Delete.png")); // 设置图标":/image/u174.png"
+    connect(action_Delete, SIGNAL(triggered()), this, SLOT(onDeleteObject()));
+    menu->addAction(action_Delete);
 }
 
 //初始化表格对象-右键菜单
@@ -750,6 +792,16 @@ void QtProjectWidgets::initTableObjectTreeMenu(QMenu *menu, QTreeWidget *treeWid
     action_DepthShift->setIcon(QIcon(GetImagePath() +  "icon/RigidDepthShifting.png")); // 设置图标
     connect(action_DepthShift, SIGNAL(triggered(bool)), this, SLOT(onDepthShift(bool)));
     menu->addAction(action_DepthShift);
+
+    QAction* action_Copy = new QAction("复制", treeWidget);
+    action_Copy->setIcon(QIcon(GetImagePath() +  "icon/Copy.png")); // 设置图标":/image/u174.png"
+    connect(action_Copy, SIGNAL(triggered()), this, SLOT(onCopySelObject()));
+    menu->addAction(action_Copy);
+
+    QAction* action_Delete = new QAction("删除", treeWidget);
+    action_Delete->setIcon(QIcon(GetImagePath() +  "icon/Delete.png")); // 设置图标":/image/u174.png"
+    connect(action_Delete, SIGNAL(triggered()), this, SLOT(onDeleteObject()));
+    menu->addAction(action_Delete);
 }
 
 //初始化根节点(井名称)-右键菜单
@@ -793,6 +845,7 @@ void QtProjectWidgets::initSlfNameTreeMenu(QMenu *menu, QTreeWidget *treeWidget)
     action_New->setIcon(QIcon(GetImagePath() + "icon/Edit.png")); // 设置图标
     connect(action_New, SIGNAL(triggered(bool)), this, SLOT(onWelllogInformation()));
     menu->addAction(action_New);
+    menu->addAction(m_action_Paste);
 
     //
     QAction* action_DepthShift = new QAction("深度移动", treeWidget);
@@ -808,8 +861,24 @@ void QtProjectWidgets::initTableFolderTreeMenu(QMenu *menu, QTreeWidget *treeWid
     action_New->setIcon(QIcon(GetImagePath() + "icon/CreateTable.png")); // 设置图标
     connect(action_New, SIGNAL(triggered(bool)), this, SLOT(onCreateNewTable()));
     menu->addAction(action_New);
-}
 
+	menu->addAction(m_action_Paste);
+}
+//初始化根节点(曲线表目录)-右键菜单
+void QtProjectWidgets::initCurveFolderTreeMenu(QMenu *menu, QTreeWidget *treeWidget)
+{
+	menu->addAction(m_action_Paste);
+}
+//初始化根节点(参数卡目录)-右键菜单
+void QtProjectWidgets::initParCardFolderTreeMenu(QMenu *menu, QTreeWidget *treeWidget)
+{
+	menu->addAction(m_action_Paste);
+}
+//初始化根节点(波列目录)-右键菜单
+void QtProjectWidgets::initWaveFolderTreeMenu(QMenu *menu, QTreeWidget *treeWidget)
+{
+	menu->addAction(m_action_Paste);
+}
 //新建项目
 void QtProjectWidgets::onNewProject(bool checked)
 {    
@@ -1069,6 +1138,92 @@ void QtProjectWidgets::onCreateNewTable()
     }
 }
 
+//删除（曲线、表格、波列、参数卡）
+void QtProjectWidgets::onDeleteObject()
+{
+    CLogIO *logio=new CLogIO;
+    if(!logio->Open(m_strSlfName.toStdString().c_str(),CLogIO::modeReadWrite)) {
+        delete logio;
+        return;
+    }
+    logio->DeleteObject(m_strCurveObjectName.toLocal8Bit().data());
+    logio->Close();
+
+    foreach(QTreeWidgetItem *pItem, ui->treeWidget->selectedItems())
+    {
+        QTreeWidgetItem *parentItem = pItem->parent()->parent();    // 上两层目录是井次
+         RefreshWellRoundTree(parentItem);
+        break;
+    }
+}
+
+void QtProjectWidgets::onCopySelObject()                // 复制
+{
+    m_strCopySlfName = m_strSlfName;                    // 当前复制的对象Slf文件
+    m_strCopyCurveObjectName = m_strCurveObjectName;    // 当前复制的对象名
+}
+
+void QtProjectWidgets::onPasteSelObject()                // 粘贴
+{
+    if (m_strCopySlfName == m_strSlfName)
+    {
+        CLogIO *logio=new CLogIO;
+        if(!logio->Open(m_strSlfName.toStdString().c_str(),CLogIO::modeReadWrite)) {
+            delete logio;
+            return;
+        }
+        char buf[1000];
+        int i=1;
+        while(1) {
+            sprintf(buf,"%s_%d",m_strCopyCurveObjectName.toStdString().c_str(),i++);
+            if (0>logio->FindObjectName(buf))
+                break;
+            }
+        logio->CopyObject(m_strCopyCurveObjectName.toStdString().c_str(), buf);
+        logio->Close();
+        delete logio;
+
+        foreach(QTreeWidgetItem *pItem, ui->treeWidget->selectedItems())
+        {
+            QTreeWidgetItem *parentItem = pItem/*->parent()*/;    // 上一层目录是井次
+            if (parentItem && m_strSlfName == parentItem->data(0, Qt::UserRole+1).toString())
+                RefreshWellRoundTree(parentItem);
+            parentItem = parentItem = pItem->parent();
+            if (parentItem && m_strSlfName == parentItem->data(0, Qt::UserRole+1).toString())
+                RefreshWellRoundTree(parentItem);
+            break;
+        }
+        return;
+    }
+}
+
+//刷新井次树
+void QtProjectWidgets::RefreshWellRoundTree(QTreeWidgetItem *parentItem)
+{
+    if (parentItem && m_strSlfName == parentItem->data(0, Qt::UserRole+1).toString())
+    {
+        // qDeleteAll(parentItem->takeChildren());
+        QTreeWidgetItem *pWellItem = parentItem->parent();
+        QString Wellname = parentItem->text(0);
+        // parentItem->setExpanded(false);
+        loadWellTree(parentItem->parent(), m_strSlfName, Wellname);
+        pWellItem->removeChild(parentItem);
+        pWellItem->setExpanded(true);
+
+        int WellCount = pWellItem->childCount();
+        for (int i = 0; i < WellCount; ++i)
+        {
+            QTreeWidgetItem *childItem = pWellItem->child(i);
+            childItem->setExpanded(true);
+            int childCount = childItem->childCount();
+            for (int j = 0; j < childCount; ++j)
+            {
+                childItem->child(j)->setExpanded(true);
+            }
+        }
+    }
+}
+
 void QtProjectWidgets::onEditWelllogRound()
 {
     QTreeWidgetItem *wellItem = *ui->treeWidget->selectedItems().begin();
@@ -1298,7 +1453,29 @@ void QtProjectWidgets::onItemClicked(QTreeWidgetItem* item, int index)
         popMenu = _menuTableFolder;
         m_strSlfName = item->parent()->data(0, Qt::UserRole+1).toString();//从父节点（井次）获取slf
     }
+    else if (strTreeTag == "ParameterCard")
+    {
+        //表格数据-右键菜单
+        popMenu = _menuParCardFolder;
+        m_strSlfName = item->parent()->data(0, Qt::UserRole+1).toString();//从父节点（井次）获取slf
+    }
+    else if (strTreeTag == "Wave")
+    {
+        //波列数据-右键菜单
+        popMenu = _menuWaveFolder;
+        m_strSlfName = item->parent()->data(0, Qt::UserRole+1).toString();//从父节点（井次）获取slf
+    }
+    else if (strTreeTag == "Curve")
+    {
+        //曲线数据-右键菜单
+        popMenu = _menuTableFolder;
+        m_strSlfName = item->parent()->data(0, Qt::UserRole+1).toString();//从父节点（井次）获取slf
+    }
 
+    if (m_strCopySlfName != m_strSlfName)
+        m_action_Paste->setVisible(false);
+    else
+        m_action_Paste->setVisible(true);
     //
     if (qApp->mouseButtons() == Qt::RightButton) // 只针对鼠标右键，弹出菜单
     {
diff --git a/logPlus/qtprojectwidgets.h b/logPlus/qtprojectwidgets.h
index 5fa537a..7ca3038 100644
--- a/logPlus/qtprojectwidgets.h
+++ b/logPlus/qtprojectwidgets.h
@@ -57,8 +57,12 @@ public slots:
     void onWelllogInformation();                //编辑测井信息
     void onDepthShift_Well(bool checked = false);	//深度移动
     //表格数据 根节点
-    void onCreateNewTable();                    //创建新表    
-
+    void onCreateNewTable();                    //创建新表
+    //删除（曲线、表格、波列、参数卡）
+    void onDeleteObject();                      // 删除
+    void onCopySelObject();                     // 复制
+    void onPasteSelObject();                    // 粘贴
+    void RefreshWellRoundTree(QTreeWidgetItem *parentItem);    // 刷新井次树
     //向左侧树图，追加固井结论表格
     void s_AddGujingToTree(QString strSlfName, QString strWellName, QString strLineName);
 
@@ -77,7 +81,11 @@ public:
     QMenu *_menuWellName;       //井名
     QMenu *_menuSlfName;        //井次
     QMenu *_menuTableFolder;    //表目录
+    QMenu *_menuCurveFolder;    //曲线目录
+    QMenu *_menuParCardFolder;  //参数卡目录
+    QMenu *_menuWaveFolder;     //波列目录
 
+    QAction* m_action_Paste;     //黏贴
     //根节点(项目名称)-右键菜单
     QAction* m_action_New;
     QAction* m_action_Open;
@@ -91,6 +99,9 @@ public:
     QString m_strSlfName;
     QString m_strCurveObjectName;
 
+    QString m_strCopySlfName;           // 当前复制的对象Slf文件
+    QString m_strCopyCurveObjectName;   // 当前复制的对象名
+
 public:
     void loadIndexSysTree(QTreeWidgetItem *parent, QString fileFull, QString prjname);
     void loadWellTree(QTreeWidgetItem *parent, QString fileFull, QString parentWellname);
@@ -116,6 +127,13 @@ public:
     void initSlfNameTreeMenu(QMenu *menu, QTreeWidget *treeWidget);
     //初始化根节点(表目录)-右键菜单
     void initTableFolderTreeMenu(QMenu *menu, QTreeWidget *treeWidget);
+    //初始化根节点(曲线表目录)-右键菜单
+    void initCurveFolderTreeMenu(QMenu *menu, QTreeWidget *treeWidget);
+    //初始化根节点(参数卡目录)-右键菜单
+    void initParCardFolderTreeMenu(QMenu *menu, QTreeWidget *treeWidget);
+    //初始化根节点(波列目录)-右键菜单
+    void initWaveFolderTreeMenu(QMenu *menu, QTreeWidget *treeWidget);
+
 
 private:
     QMap<QString, QList<QString> > m_qmapWellFiles;