固井结论右键菜单，追加：分割、删除当前对象、设置深度移动量功能，并支持实时更新到slf文件。

CallManage/CallManage.h

@@ -191,6 +191,9 @@ signals:
     //编辑曲线，框选拉伸/压缩
     void sig_EShiftDepth(QString strSlfName, QString strLineName, int count, QList<double> left_Low_List, QList<double> right_Hight_List);
 
+    //向左侧树图，追加固井结论表格
+    void sig_AddGujingToTree(QString strSlfName, QString strWellName, QString strLineName);
+
     //
     //void sig_addImageToPlot(QMyCustomPlot* customPlot, double left_Low, double right_Hight, QString imagePath);
 

logPlus/PropertyWidget.cpp

@@ -233,6 +233,8 @@ void PropertyWidget::SlotPropertyChanged( QtProperty *pProperty, const QVariant
             {
                 double upper = variant.value<double>();
                 m_tdGujing->setUpper(-upper);
+                //保存
+                m_tdGujing->mPlot->SaveToSLF_Gujing();
             }
         }
         else if("底深(m)" == m_propertyData[pProperty])
@@ -242,6 +244,8 @@ void PropertyWidget::SlotPropertyChanged( QtProperty *pProperty, const QVariant
             {
                 double lower = variant.value<double>();
                 m_tdGujing->setLower(-lower);
+                //保存
+                m_tdGujing->mPlot->SaveToSLF_Gujing();
             }
         }
         else if("固井结论" == m_propertyData[pProperty])
@@ -254,6 +258,8 @@ void PropertyWidget::SlotPropertyChanged( QtProperty *pProperty, const QVariant
                 //
                 QCPRange currentRange = m_tdGujing->getRange();
                 m_tdGujing->setRange(currentRange.lower, currentRange.upper);
+                //保存
+                m_tdGujing->mPlot->SaveToSLF_Gujing();
             }
         }
     }

logPlus/TransparentDraggableGujing.cpp

@@ -306,11 +306,84 @@ void TransparentDraggableGujing::updateHandles()
 
 }
 
+//分割
+void TransparentDraggableGujing::onSplitRect()
+{
+    QCPRange currentRange = getRange();
+    //分割后显示上半部分
+    setRange((currentRange.lower+currentRange.upper)/2.0, currentRange.upper);
+
+    //添加下半部分
+    mPlot->addGujingToPlot(currentRange.lower, (currentRange.lower+currentRange.upper)/2.0, m_Result);
+
+    double low = mRect->topLeft->coords().x();
+    double hight = mRect->bottomRight->coords().x();
+    PropertyService()->initGujingItemProperty(this, low, hight, m_Result);
+    //保存
+    mPlot->SaveToSLF_Gujing();
+
+    //取消所有选中单元格
+    emit CallManage::getInstance()->sig_Raise(mPlot->m_strUuid, "", "", "", "", 1, "");
+}
+
+//删除
 void TransparentDraggableGujing::onDelRect()
 {
     //mDragMode = DragNone;
     //删除框图
     deleteRect();
+    //保存
+    mPlot->SaveToSLF_Gujing();
+}
+
+//全部清空
+void TransparentDraggableGujing::onDelAll()
+{
+    if(QMessageBox::information(NULL,QObject::tr("提示"),QObject::tr("该功能将清除当前组件展示的全部信息，清除后无法恢复,但会备份到对应的\"_BAK\"中，确定清除吗？"),QMessageBox::Yes|QMessageBox::No)!=QMessageBox::Yes) return;
+    QString obj=mPlot->m_strLineName + "BAK";
+
+}
+
+//设置深度移动量
+void TransparentDraggableGujing::setItemDepthOffset()
+{
+    bool ok=0;
+    double depthshift=QInputDialog::getDouble(NULL,"深度移动","请输入移动的深度量(上移-,下移+)",0.0,-2147483647, 2147483647,4,&ok);
+    if(!ok) return;
+
+    QCPRange currentRange = getRange();
+    QCPRange newRange = currentRange;
+
+    newRange.lower = currentRange.lower-depthshift;
+    newRange.upper = currentRange.upper-depthshift;
+
+    //
+    double width = currentRange.size();
+//    //double center = mDragStartRange.center() + dx;
+//    double center = currentRange.center() - depthshift;
+//    newRange.lower = center - width/2;
+//    newRange.upper = center + width/2;
+
+    // 检查是否超出轴范围
+    if(newRange.lower < getMyLower()) {
+        return;
+    }
+    else if(newRange.upper > getMyUpper()) {
+        return;
+    }
+    //
+    setRange(newRange.lower, newRange.upper);
+
+    {
+        double low = mRect->topLeft->coords().x();
+        double hight = mRect->bottomRight->coords().x();
+        PropertyService()->initGujingItemProperty(this, low, hight, m_Result);
+        //保存
+        mPlot->SaveToSLF_Gujing();
+
+        //取消所有选中单元格
+        emit CallManage::getInstance()->sig_Raise(mPlot->m_strUuid, "", "", "", "", 1, "");
+    }
 }
 
 //设置顶深
@@ -379,8 +452,15 @@ void TransparentDraggableGujing::onMousePress(QMouseEvent *event)
 
         //event->accept();
 
+        double low = mRect->topLeft->coords().x();
+        double hight = mRect->bottomRight->coords().x();
+        PropertyService()->initGujingItemProperty(this, low, hight, m_Result);
+
         QMenu menu(nullptr);
+        menu.addAction(QIcon(::GetImagePath() +  "icon/Split.png"), "分割", this, &TransparentDraggableGujing::onSplitRect);
         menu.addAction(QIcon(::GetImagePath() +  "icon/Delete.png"), "删除选中对象", this, &TransparentDraggableGujing::onDelRect);
+        menu.addAction(QIcon(::GetImagePath() +  "icon/Shift.png"), "设置深度移动量", this, &TransparentDraggableGujing::setItemDepthOffset);
+        menu.addAction(QIcon(::GetImagePath() +  "icon/Delete.png"), "全部清空", this, &TransparentDraggableGujing::onDelAll);
         menu.exec(event->globalPos());
 
         return;
@@ -525,6 +605,9 @@ void TransparentDraggableGujing::onMouseRelease(QMouseEvent *event)
             double low = mRect->topLeft->coords().x();
             double hight = mRect->bottomRight->coords().x();
             PropertyService()->initGujingItemProperty(this, low, hight, m_Result);
+            //保存
+            mPlot->SaveToSLF_Gujing();
+
             //取消所有选中单元格
             emit CallManage::getInstance()->sig_Raise(mPlot->m_strUuid, "", "", "", "", 1, "");
         }

logPlus/TransparentDraggableGujing.h

@@ -58,14 +58,17 @@ private:
     void updateHandles() ;
  
 private slots:
-    void onDelRect();
+    void onSplitRect(); //分割
+    void onDelRect();   //删除
+    void onDelAll();    //全部清空
+    void setItemDepthOffset();   //设置深度移动量
     void onMousePress(QMouseEvent *event);
     void onMouseMove(QMouseEvent *event); 
     void onMouseRelease(QMouseEvent *event);
     double getMyLower();
     double getMyUpper();
     
-private:
+public:
     QMyCustomPlot *mPlot;
     QCPItemRect *mRect;
     QCPItemRect *mLeftHandle;

logPlus/formdraw.cpp

@@ -4059,9 +4059,9 @@ bool FormDraw::LoadFromSLF_Gujing(QMyCustomPlot *widget, QString strSlfName, QSt
         file.close();
     }
 
-    QMap<QString,QString> zoneOrder;
+    //QMap<QString,QString> zoneOrder;
     for(int i=0;i<lines.size();i++){
-        zoneOrder.insert(lines[i],QString::number(i));
+        widget->zoneOrder_Gujing.insert(lines[i],QString::number(i));
     }
 
     int iIndex=logio->OpenTable(strLineName.toStdString().c_str());
@@ -4083,7 +4083,7 @@ bool FormDraw::LoadFromSLF_Gujing(QMyCustomPlot *widget, QString strSlfName, QSt
             QString result = "";
 
             //
-            QString iconshotname=zoneOrder.key(QString::number(m_Result->RESULT));
+            QString iconshotname=widget->zoneOrder_Gujing.key(QString::number(m_Result->RESULT));
             if(iconshotname!="")
                 result=::GetGujingSymbolDir()+iconshotname+".svg";
             int len=2;

logPlus/mainwindow.cpp

@@ -336,21 +336,21 @@ void MainWindow::s_Open()
 
 void MainWindow::s_SaveProject()
 {
-    //加载插件显示
+//    //加载插件显示
-    QWidget * pMyWidget = CallPlugin::getInstance()->getPluginWidget(PLUGINUNIT, (QWidget *)this);
+//    QWidget * pMyWidget = CallPlugin::getInstance()->getPluginWidget(PLUGINUNIT, (QWidget *)this);
-    if (pMyWidget != nullptr)
+//    if (pMyWidget != nullptr)
-    {
+//    {
-        //
+//        //
-        m_centerWidgets->addTab(pMyWidget, "插件视图");
+//        m_centerWidgets->addTab(pMyWidget, "插件视图");
-    }
+//    }
 
-    //设置参数
+//    //设置参数
-    QString strParams = "hello";
+//    QString strParams = "hello";
-    CallPlugin::getInstance()->setPluginParams(PLUGINUNIT, strParams);
+//    CallPlugin::getInstance()->setPluginParams(PLUGINUNIT, strParams);
 
-    //获取参数
+//    //获取参数
-    QString strParams2 = CallPlugin::getInstance()->getPluginParams(PLUGINUNIT);
+//    QString strParams2 = CallPlugin::getInstance()->getPluginParams(PLUGINUNIT);
-    qDebug() << "getPluginParams: " << strParams2;
+//    qDebug() << "getPluginParams: " << strParams2;
 
 //    //加载插件显示
 //    QWidget * pMyWidget = CallPlugin::getInstance()->getPluginWidget(MYUNITPLUGIN, NULL);

logPlus/qmycustomplot.cpp

@@ -18,6 +18,7 @@
 #include "transparentdraggableRightList.h"
 #include "qtcommonclass.h"
 #include "slf.h"
+#include "MemRdWt.h"
 
 //是否隐藏刻度
 extern int g_iShow;
@@ -881,7 +882,7 @@ void QMyCustomPlot::contextMenuEvent(QContextMenuEvent *event)
     {
         QMenu menu(this);
         //固井
-        menu.addAction(QIcon(::GetImagePath() +  "curve.png"), "添加固井结论", this, &QMyCustomPlot::onEditGujing);
+        menu.addAction(QIcon(::GetImagePath() +  "curve.png"), "开始编辑固井结论", this, &QMyCustomPlot::onEditGujing);
         menu.exec(event->globalPos());
     }
 
@@ -1043,10 +1044,41 @@ void QMyCustomPlot::onEditGujing()
             double right_Hight = this->xAxis->pixelToCoord(top);
             double left_Low = this->xAxis->pixelToCoord(bottom);
 
+            //追加判断，避免框选重叠
+            TransparentDraggableGujing *pDraggableRect =NULL;
+            {
+                QMap<QString,QObject *>::Iterator it = m_mapDraggable_Gujing.begin();
+                while( it != m_mapDraggable_Gujing.end() )
+                {
+                    pDraggableRect = (TransparentDraggableGujing*)it.value();
+                    //
+                    QCPRange tmpRange = pDraggableRect->getRange();
+                    if(tmpRange.lower >= left_Low && tmpRange.upper <= right_Hight)
+                    {
+                        return;
+                    }
+
+                    if(tmpRange.upper >= left_Low && tmpRange.upper <= right_Hight)
+                    {
+                        return;
+                    }
+
+                    if(tmpRange.lower >= left_Low && tmpRange.lower <= right_Hight)
+                    {
+                        return;
+                    }
+
+                    it++;
+                }
+            }
+
             {
                 //添加固井结论
                 this->addGujingToPlot(left_Low, right_Hight, ::GetGujingSymbolDir());//left_Low, right_Hight
 
+                //保存
+                this->SaveToSLF_Gujing();
+
                 //取消框选
                 this->setInteractions(QCP::iSelectLegend | QCP::iSelectPlottables);
                 this->setSelectionRectMode(QCP::srmNone);
@@ -1056,6 +1088,90 @@ void QMyCustomPlot::onEditGujing()
     }
 }
 
+
+bool QMyCustomPlot::SaveToSLF_Gujing()
+{
+    static int isrun=false;
+    if(isrun) return false;
+    QString ss=m_strSlfName;
+    if(ss=="") return false;
+    isrun=true;
+
+    GUJING_DATA m_Result;
+    CMemRdWt *logio=new CMemRdWt();
+    if(ss==""||!logio->Open(ss.toStdString().c_str(),CSlfIO::modeReadWrite))
+    {
+        delete logio;
+        QMessageBox::information(NULL,"提示","SLF文件打开失败，请检查！！",QMessageBox::Yes);
+        isrun=false;
+        return false;
+    }
+
+    int iIndex=logio->OpenTable(m_strLineName.toStdString().c_str());
+    bool isfirst=false;
+    if (iIndex < 0)
+    {
+        if(!m_mapDraggable_Gujing.size()) {
+            delete logio;
+            isrun=false;
+            return false;
+        }
+        iIndex=logio->Open_Set_Table(m_strLineName.toStdString().c_str(),GUJING_OBJECT,4,
+            "NO,SDEP,EDEP,RESULT",
+            "4,4,4,4",//字段长度
+            "1,4,4,1",//字段类型
+            "0,0,0,2");//字段备注
+        isfirst=true;
+    }
+    logio->SetTableRecordCount(iIndex,m_mapDraggable_Gujing.size());
+    int j=0;
+    if(!m_mapDraggable_Gujing.size()) {
+        delete logio;
+        if(isfirst)AddTableToWellRound();
+        isrun=false;
+        return false;
+    }
+
+    TransparentDraggableGujing *pDraggableRect =NULL;
+    for (QMap<QString,QObject *>::Iterator iter = m_mapDraggable_Gujing.begin(); iter != m_mapDraggable_Gujing.end(); iter++,j++)
+    {
+        pDraggableRect = (TransparentDraggableGujing*)iter.value();
+        //
+        QCPRange tmpRange = pDraggableRect->getRange();
+
+        memset(&m_Result,0,sizeof(GUJING_DATA));
+        m_Result.SDEP = -tmpRange.upper;
+        m_Result.EDEP = -tmpRange.lower;
+        m_Result.NO=j+1;
+        m_Result.RESULT=0;
+        QString innerresult=GetIntResult_Gujing(pDraggableRect->m_Result);
+        if(innerresult!="")
+            m_Result.RESULT=innerresult.toInt();
+        if(m_Result.RESULT<0) m_Result.RESULT=0;
+        logio->WriteTable(iIndex,j+1,&m_Result);
+    }
+    logio->CloseTable(iIndex);
+    delete logio;
+    if(isfirst)AddTableToWellRound();
+    isrun=false;
+    return true;
+}
+
+QString QMyCustomPlot::GetIntResult_Gujing(QString result)
+{
+    if(result=="") return "";
+    QFileInfo afile(result);
+    QString strBaseName = afile.completeBaseName();
+
+    return zoneOrder_Gujing.value(strBaseName);
+}
+
+//向左侧树图，追加固井结论表格
+void QMyCustomPlot::AddTableToWellRound()
+{
+    emit CallManage::getInstance()->sig_AddGujingToTree(m_strSlfName, m_strWellName, m_strLineName);
+}
+
 void QMyCustomPlot::onAddRect()
 {
     double right_Hight = xAxis->pixelToCoord(m_event->pos().y());//x轴展示深度
@@ -1675,6 +1791,7 @@ void QMyCustomPlot::addGujingToPlot(double left_Low, double right_Hight, const Q
     //dragRect->setTitle(strText);
 
     m_mapDraggable_Gujing[strUuid] = dragRect;
+
 }
 
 //气测/FMT/射孔/文本

logPlus/qmycustomplot.h

@@ -137,6 +137,12 @@ public:
     QObject* m_SelectShiftLine=nullptr;//当前选中的分段线
     QObject* m_SelectRect=nullptr;//当前选中的曲线编辑框
 
+    //固井
+    QMap<QString,QString> zoneOrder_Gujing;
+    bool SaveToSLF_Gujing();
+    QString GetIntResult_Gujing(QString result);
+    void AddTableToWellRound();//将固井结论表，添加到左侧树图
+
 public slots:
     void slot_time();
 

logPlus/qtprojectwidgets.cpp

@@ -51,6 +51,8 @@ QtProjectWidgets::QtProjectWidgets(QWidget *parent)
     connect(CallManage::getInstance(), SIGNAL(sig_NewProject()), this, SLOT(s_NewProject()));
     //关联信号槽，打开评估工程
     connect(CallManage::getInstance(), SIGNAL(sig_OpenProject(QString)), this, SLOT(s_OpenProject(QString)));
+    //向左侧树图，追加固井结论表格
+    connect(CallManage::getInstance(), SIGNAL(sig_AddGujingToTree(QString,QString,QString)), this, SLOT(s_AddGujingToTree(QString,QString,QString)));
 
     //初始化树形控件中的右键菜单
     initMenu();
@@ -1272,3 +1274,45 @@ void QtProjectWidgets::onItemChanged(QTreeWidgetItem* item, int index)
 //        emit CallManage::getInstance()->sig_testPlugin(m_strCurveObjectName);
 //    }
 }
+
+//向左侧树图，追加固井结论表格
+void QtProjectWidgets::s_AddGujingToTree(QString strSlfName, QString strWellName, QString strLineName)
+{
+    int topCount = ui->treeWidget->topLevelItemCount(); // 获取顶级节点数量
+    if(topCount<1)
+    {
+        return;
+    }
+
+    QTreeWidgetItem *item = ui->treeWidget->topLevelItem(0);
+    int childCount = item->childCount(); // 获取子节点数量
+    for (int i = 0; i < childCount; ++i)
+    {
+        //井组，数据分析...
+        QTreeWidgetItem *wellGroupItem = item->child(i);
+        QString wellGroupname = wellGroupItem->text(0);
+        if (wellGroupname == "井组")
+        {
+            int wellCount = wellGroupItem->childCount(); // 获取井节点数量
+            for (int j = 0; j < wellCount; ++j)
+            {
+                //井组，数据分析...
+                QTreeWidgetItem *wellItem = wellGroupItem->child(j);
+                QString wellname = wellItem->text(0);
+                if(wellname==strWellName)//井
+                {
+                    // 获取井次节点数量
+                    int wellLogCount = wellItem->childCount();
+                    for (int k = 0; k < wellLogCount; ++k)
+                    {
+                        QTreeWidgetItem *wellLogItem = wellItem->child(k);
+                        wellItem->removeChild(wellLogItem);
+                    }
+                    //井重新加载井次信息
+                    loadWellTree(wellItem, strSlfName, strWellName);
+                    wellItem->setExpanded(true);
+                }
+            }
+        }
+    }
+}

logPlus/qtprojectwidgets.h

@@ -57,6 +57,10 @@ public slots:
     void onDepthShift_Well(bool checked = false);	//深度移动
     //表格数据 根节点
     void onCreateNewTable();                    //创建新表    
+
+    //向左侧树图，追加固井结论表格
+    void s_AddGujingToTree(QString strSlfName, QString strWellName, QString strLineName);
+
 public:
     //初始化树图控件
     //void initTreeWidget(QString fullPath, QString strProjectName);
@@ -111,6 +115,7 @@ public:
     void initSlfNameTreeMenu(QMenu *menu, QTreeWidget *treeWidget);
     //初始化根节点(表目录)-右键菜单
     void initTableFolderTreeMenu(QMenu *menu, QTreeWidget *treeWidget);
+
 private:
 
 };

编译说明.txt

@@ -23,4 +23,9 @@ https://www.cnblogs.com/ys0103/p/4562493.html
 20.logPlus
 
 
+powershell统计代码行数
+Get-ChildItem -Recurse -Include *.h | Get-Content | Measure-Object -Line
 
+Get-ChildItem -Recurse -Include *.cpp | Get-Content | Measure-Object -Line
+
+Get-ChildItem -Recurse -Include *.ui | Get-Content | Measure-Object -Line