diff --git a/logPlus/PropertyWidget.cpp b/logPlus/PropertyWidget.cpp
index f00f8a2..59e9e13 100644
--- a/logPlus/PropertyWidget.cpp
+++ b/logPlus/PropertyWidget.cpp
@@ -286,7 +286,13 @@ void PropertyWidget::changedYxzpItemProperty(QtProperty *qtProperty, const QVari
 
 void PropertyWidget::changedCorePhysicsProperty(QtProperty *qtProperty, const QVariant &variant, bool isItem)
 {
-    if("例区高度" == m_propertyData[qtProperty])
+    if("曲线名称" == m_propertyData[qtProperty])
+    {
+        QFont newFont = variant.value<QFont>();
+        m_formInfo->m_curveNameFont = newFont;
+        m_formInfo->update();
+    }
+    else if("例区高度" == m_propertyData[qtProperty])
     {
         int temp = variant.toInt();
         this->m_formInfo->m_headHeight = temp;
@@ -456,24 +462,28 @@ void PropertyWidget::changedCorePhysicsProperty(QtProperty *qtProperty, const QV
         int temp = variant.toInt();
         this->m_tdCorePhysics->setCpOrder(temp);
         this->m_tdCorePhysics->mPlot->saveToSLFCorePhysics();
+        this->m_tdCorePhysics->update();
     }
     else if("深度" == m_propertyData[qtProperty])
     {
         double temp = variant.toDouble();
         this->m_tdCorePhysics->setCpDepth(temp);
         this->m_tdCorePhysics->mPlot->saveToSLFCorePhysics();
+        this->m_tdCorePhysics->update();
     }
     else if("校正深度" == m_propertyData[qtProperty])
     {
         double temp = variant.toDouble();
         this->m_tdCorePhysics->setRange(temp,temp,this->m_tdCorePhysics->getCpCoreValue());
         this->m_tdCorePhysics->mPlot->saveToSLFCorePhysics();
+        this->m_tdCorePhysics->update();
     }
     else if("数值" == m_propertyData[qtProperty])
     {
         double temp = variant.toDouble();
         this->m_tdCorePhysics->setCpCoreValue(temp);
         this->m_tdCorePhysics->mPlot->saveToSLFCorePhysics();
+        this->m_tdCorePhysics->update();
     }
     else if("左刻度" == m_propertyData[qtProperty])
     {
@@ -484,15 +494,6 @@ void PropertyWidget::changedCorePhysicsProperty(QtProperty *qtProperty, const QV
         QVariantMap variantMap;
         variantMap["leftScale"] = temp;
         emit CallManage::getInstance()->sig_changeCorePhysicsProperty(variantMap);
-
-//        this->m_tdCorePhysics->setCpLeftScale(temp);
-        // 这个操作需要修改所有对象
-//        QMap<QString, QObject*> m_mapDraggable_CorePhysics = this->m_tdCorePhysics->mPlot->m_mapDraggable_CorePhysics;
-//        for (QMap<QString,QObject *>::Iterator iter = m_mapDraggable_CorePhysics.begin(); iter != m_mapDraggable_CorePhysics.end(); iter++)
-//        {
-//            TransparentDraggableCorePhysics* pDraggableRect = (TransparentDraggableCorePhysics*)iter.value();
-//            pDraggableRect->setCpLeftScale(temp);
-//        }
     }
     else if("右刻度" == m_propertyData[qtProperty])
     {
@@ -503,14 +504,6 @@ void PropertyWidget::changedCorePhysicsProperty(QtProperty *qtProperty, const QV
         QVariantMap variantMap;
         variantMap["rightScale"] = temp;
         emit CallManage::getInstance()->sig_changeCorePhysicsProperty(variantMap);
-
-//        this->m_tdCorePhysics->setCpRightScale(temp);
-//        QMap<QString, QObject*> m_mapDraggable_CorePhysics = this->m_tdCorePhysics->mPlot->m_mapDraggable_CorePhysics;
-//        for (QMap<QString,QObject *>::Iterator iter = m_mapDraggable_CorePhysics.begin(); iter != m_mapDraggable_CorePhysics.end(); iter++)
-//        {
-//            TransparentDraggableCorePhysics* pDraggableRect = (TransparentDraggableCorePhysics*)iter.value();
-//            pDraggableRect->setCpRightScale(temp);
-//        }
     }
     else if("等分刻度数或自定义序列" == m_propertyData[qtProperty])
     {
@@ -564,12 +557,7 @@ void PropertyWidget::changedCorePhysicsProperty(QtProperty *qtProperty, const QV
     {
         QFont temp = variant.value<QFont>();
         this->m_formInfo->m_cp_curveScale = temp;
-        this->m_tdCorePhysics->setCpCurveScale(temp);
-    }
-
-    if(isItem)
-    {
-        this->m_tdCorePhysics->update();
+        this->m_formInfo->repaint();
     }
 }
 
@@ -2807,7 +2795,7 @@ void PropertyWidget::initDepthProperty(FormInfo *formInfo)
     _CreateVariantPropertyItem("通常", "显示单位", formInfo->m_strUnit, QVariant::String);
     _CreateVariantPropertyItem("通常", "标尺颜色", formInfo->m_sdRulerColor, QVariant::Color);
 
-    _CreateVariantPropertyItem("字体", "字体", formInfo->m_curveNameFont, QVariant::Font);
+    _CreateVariantPropertyItem("字体", "名称", formInfo->m_curveNameFont, QVariant::Font);
     _CreateVariantPropertyItem("字体", "单位", formInfo->m_strUnitFont, QVariant::Font);
 
     _CreateVariantPropertyItem("深度标注", "间隔", formInfo->m_sdInterval, QVariant::Double);
@@ -2819,9 +2807,9 @@ void PropertyWidget::initDepthProperty(FormInfo *formInfo)
     _CreateVariantPropertyItem("深度标注", "海拔垂深", formInfo->m_sdElevationVerticalDepth, QVariant::Bool);
     _CreateVariantPropertyItem("深度标注", "垂深", formInfo->m_sdVerticalDepth, QVariant::Bool);
     QStringList listStyle;
-    listStyle.append("偏左");
+    listStyle.append("靠左");
     listStyle.append("居中");
-    listStyle.append("偏右");
+    listStyle.append("靠右");
     _CreateEnumPropertyItem("深度标注", "斜深位置", formInfo->m_sdMeasuredDepthPosition, listStyle);
     _CreateEnumPropertyItem("深度标注", "垂深位置", formInfo->m_sdVerticalDepthPosition, listStyle);
     _CreateEnumPropertyItem("深度标注", "海拔垂深位置", formInfo->m_sdElevationVerticalDepthPosition, listStyle);
@@ -2928,6 +2916,12 @@ void PropertyWidget::initProperty(FormInfo *formInfo)
         //套管组件
         this->initTubingProperty(formInfo);
     }
+    else if (formInfo->m_strType == "plObject")
+    {
+        //频率统计图
+        this->initPlObjectProperty(formInfo);
+    }
+
 }
 
 void PropertyWidget::initRoseProperty(FormInfo *formInfo)
@@ -3420,7 +3414,7 @@ void PropertyWidget::initCorePhysicsProperty(FormInfo *formInfo, bool isItem)
     _CreateEnumPropertyItem("显示设置", "刻度类型", formInfo->m_cp_scaleType, listStyle4);
     _CreateVariantPropertyItem("显示设置", "显示单位", formInfo->m_strUnit, QVariant::String);
 
-    _CreateVariantPropertyItem("字体", "字体", formInfo->m_curveNameFont, QVariant::Font);
+    _CreateVariantPropertyItem("字体", "曲线名称", formInfo->m_curveNameFont, QVariant::Font);
     _CreateVariantPropertyItem("字体", "曲线单位", formInfo->m_strUnitFont, QVariant::Font);
     _CreateVariantPropertyItem("字体", "曲线刻度", formInfo->m_cp_curveScale, QVariant::Font);
 
@@ -3818,9 +3812,78 @@ void PropertyWidget::initTubingItemProperty(TransparentDraggableGuan* tdGuan, do
     _CreateVariantPropertyItem("当前项", "组件类型", strResult, VariantManager::filePathTypeId());
 }
 
+void PropertyWidget::initPlObjectProperty(FormInfo *formInfo)
+{
+    _CreateVariantPropertyItem("数据", "名称", formInfo->m_strAliasName, QVariant::String);
+    _CreateVariantPropertyItem("数据", "数据类型", formInfo->m_strAliasName, QVariant::String);
+    _CreateVariantPropertyItem("数据", "显示单位", formInfo->m_strAliasName, QVariant::String);
+    _CreateVariantPropertyItem("数据", "井文件名称", formInfo->m_strAliasName, QVariant::String);
+    _CreateVariantPropertyItem("数据", "方位曲线", formInfo->m_strAliasName, QVariant::String);
+    _CreateVariantPropertyItem("数据", "倾角曲线", formInfo->m_strAliasName, QVariant::String);
+
+    _CreateVariantPropertyItem("通常", "例区高度(cm)", formInfo->m_strAliasName, QVariant::String);
+
+    _CreateVariantPropertyItem("字体", "名称", formInfo->m_strAliasName, QVariant::String);
+    _CreateVariantPropertyItem("字体", "单位", formInfo->m_strAliasName, QVariant::String);
+    _CreateVariantPropertyItem("字体", "刻度", formInfo->m_strAliasName, QVariant::String);
+    _CreateVariantPropertyItem("字体", "曲线名称", formInfo->m_strAliasName, QVariant::String);
+
+    _CreateVariantPropertyItem("控制曲线", "曲线名", formInfo->m_strAliasName, QVariant::String);
+    _CreateVariantPropertyItem("控制曲线", "最小值", formInfo->m_strAliasName, QVariant::String);
+    _CreateVariantPropertyItem("控制曲线", "最大值", formInfo->m_strAliasName, QVariant::String);
+
+    _CreateVariantPropertyItem("方位频率", "扇形", formInfo->m_strAliasName, QVariant::String);
+    _CreateVariantPropertyItem("方位频率", "圆半径(cm)", formInfo->m_strAliasName, QVariant::String);
+    _CreateVariantPropertyItem("方位频率", "圆线颜色", formInfo->m_strAliasName, QVariant::String);
+    _CreateVariantPropertyItem("方位频率", "圆线宽度", formInfo->m_strAliasName, QVariant::String);
+    _CreateVariantPropertyItem("方位频率", "是否填充", formInfo->m_strAliasName, QVariant::String);
+    _CreateVariantPropertyItem("方位频率", "填充颜色", formInfo->m_strAliasName, QVariant::String);
+
+    _CreateVariantPropertyItem("倾角频率", "线数", formInfo->m_strAliasName, QVariant::String);
+    _CreateVariantPropertyItem("倾角频率", "统计线高度(cm)", formInfo->m_strAliasName, QVariant::String);
+    _CreateVariantPropertyItem("倾角频率", "线粗细", formInfo->m_strAliasName, QVariant::String);
+    _CreateVariantPropertyItem("倾角频率", "线颜色", formInfo->m_strAliasName, QVariant::String);
+    _CreateVariantPropertyItem("倾角频率", "是否绘制标注?", formInfo->m_strAliasName, QVariant::String);
+    _CreateVariantPropertyItem("倾角频率", "绘制直方图?", formInfo->m_strAliasName, QVariant::String);
+
+    _CreateVariantPropertyItem("基线", "宽度", formInfo->m_strAliasName, QVariant::String);
+    _CreateVariantPropertyItem("基线", "颜色", formInfo->m_strAliasName, QVariant::String);
+
+    _CreateVariantPropertyItem("统计参数", "统计间隔", formInfo->m_strAliasName, QVariant::String);
+    _CreateVariantPropertyItem("统计参数", "最小倾角", formInfo->m_strAliasName, QVariant::String);
+    _CreateVariantPropertyItem("统计参数", "最大倾角", formInfo->m_strAliasName, QVariant::String);
+
+    _CreateVariantPropertyItem("分类", "高导缝", formInfo->m_strAliasName, QVariant::String);
+    _CreateVariantPropertyItem("分类", "高阻缝", formInfo->m_strAliasName, QVariant::String);
+    _CreateVariantPropertyItem("分类", "网状缝", formInfo->m_strAliasName, QVariant::String);
+    _CreateVariantPropertyItem("分类", "诱导缝", formInfo->m_strAliasName, QVariant::String);
+    _CreateVariantPropertyItem("分类", "层理", formInfo->m_strAliasName, QVariant::String);
+    _CreateVariantPropertyItem("分类", "侵蚀面", formInfo->m_strAliasName, QVariant::String);
+    _CreateVariantPropertyItem("分类", "孔洞", formInfo->m_strAliasName, QVariant::String);
+    _CreateVariantPropertyItem("分类", "气孔", formInfo->m_strAliasName, QVariant::String);
+    _CreateVariantPropertyItem("分类", "砾石", formInfo->m_strAliasName, QVariant::String);
+    _CreateVariantPropertyItem("分类", "结核", formInfo->m_strAliasName, QVariant::String);
+    _CreateVariantPropertyItem("分类", "团块", formInfo->m_strAliasName, QVariant::String);
+    _CreateVariantPropertyItem("分类", "断层", formInfo->m_strAliasName, QVariant::String);
+    _CreateVariantPropertyItem("分类", "垂直缝", formInfo->m_strAliasName, QVariant::String);
+    _CreateVariantPropertyItem("分类", "自定义1", formInfo->m_strAliasName, QVariant::String);
+    _CreateVariantPropertyItem("分类", "自定义2", formInfo->m_strAliasName, QVariant::String);
+}
+
+void PropertyWidget::changedPlObjectProperty(QString strProName, QVariant val)
+{
+
+}
+
 void PropertyWidget::changedDepthProperty(QString strProperty, QVariant varVal)
 {
-    if ("显示单位" == strProperty)
+    if ("名称" == strProperty)
+    {
+        QFont newFont = varVal.value<QFont>();
+        m_formInfo->m_curveNameFont = newFont;
+        this->m_formInfo->repaint();
+    }
+    else if ("显示单位" == strProperty)
     {
         this->m_formInfo->m_strUnit = varVal.toString();
         this->m_formInfo->repaint();
diff --git a/logPlus/PropertyWidget.h b/logPlus/PropertyWidget.h
index cf1ead6..c77f357 100644
--- a/logPlus/PropertyWidget.h
+++ b/logPlus/PropertyWidget.h
@@ -52,6 +52,7 @@
 #define CORE_PHYSICS_ITEM_PROPERTY     "CORE_PHYSICS_ITEM_PROPERTY"       // 岩心分析item
 
 #define Depth_Property         "Depth_Property"           // 深度
+#define PL_OBJECT_PROPERTY         "PL_OBJECT_PROPERTY"           // 深度
 
 #define SwallCore_Property      "SwallCore_Property"        //井壁取心
 #define SwallCoreItem_Property  "SwallCoreItem_Property"    //井壁取心item
@@ -228,6 +229,10 @@ public:
     void initTubingProperty(FormInfo *formInfo);
     void initTubingItemProperty(TransparentDraggableGuan* tdGuan, double lower, double upper, QString strResult);
 
+    // 频率统计图
+    void initPlObjectProperty(FormInfo *formInfo);
+    void changedPlObjectProperty(QString strProName, QVariant val);
+
     void ChangFillProperty();//填充属性改变
     void ChangHeadItemProperty();//图头项改变
 
diff --git a/logPlus/forminfo.h b/logPlus/forminfo.h
index 53116bc..09dd583 100644
--- a/logPlus/forminfo.h
+++ b/logPlus/forminfo.h
@@ -205,7 +205,7 @@ public:
     QColor m_sdRulerColor;                // 标尺颜色
     double m_sdInterval = 20;                  // 间隔
     QFont m_sdLabelFont = QFont("微软雅黑", 10);                  // 标注字体
-    double m_sdRotationAngle = 0.0;             // 旋转(°)
+    double m_sdRotationAngle = 90.0;             // 旋转(°)
     bool m_sdDrawStartDepth;            // 绘制起点深度
     bool m_sdDrawEndDepth;              // 绘制终点深度
     bool m_sdMeasuredDepth = true;             // 斜深
diff --git a/logPlus/qmycustomplot.cpp b/logPlus/qmycustomplot.cpp
index e7b98d7..a15c4e0 100644
--- a/logPlus/qmycustomplot.cpp
+++ b/logPlus/qmycustomplot.cpp
@@ -4140,6 +4140,18 @@ void QMyCustomPlot::ClearSelectItems()
 			pGroup->setSelectRect(false);
 		}
 	}
+    else if (m_strLineName == "CORE_PHYSICS")
+    {
+        if(m_SelectShiftLine)
+        {
+            TransparentDraggableCorePhysics *tdCorePhysics = (TransparentDraggableCorePhysics*)this->m_SelectShiftLine;
+            QPen pen = tdCorePhysics->qcpItemLine->pen();
+            pen.setColor(tdCorePhysics->getCpLineColor());
+            tdCorePhysics->qcpItemLine->setPen(pen);
+            this->replot();
+            m_SelectShiftLine = nullptr;
+        }
+    }
     //属性清空
     PropertyService()->InitCurrentViewInfo();
 }
@@ -4988,7 +5000,7 @@ void QMyCustomPlot::s_changeDepthProperty(QVariantList vlist)
             switch(temp)
             {
             case 0:
-                // 偏左
+                // 靠左
                 this->yAxis->setTickLabelPadding(5);
                 break;
             case 1: